Commercial Pepsi Beverage Display Cooler with 680L Capacity Danfoss Compressor and Auto Closing Heated Swing Door

Premium Commercial Glass Door Beverage Refrigerator

Ideal for Pepsi, Coca-Cola, Milk, Drinks, Beer, and Bottled Beverages

This high-visibility upright beverage display cooler features a sleek Pepsi-style design with heated auto-closing double glass doors, bright LED lighting, and adjustable heavy-duty shelves. Perfect for supermarkets, convenience stores, restaurants, and retail outlets. Equipped with reliable Danfoss compressors, fan-forced cooling, smart digital thermostat, automatic defrost, and energy-efficient LED illumination to maintain a stable 0~10°C temperature range while maximizing product appeal and impulse sales.

Dimensions: 620×680×2120mm | Capacity: 680L (single model) | Larger multi-door variants available up to 5 doors.

2026 Latest Energy Efficiency Standards for Commercial Beverage Display Coolers

In 2026, commercial beverage coolers (vertical closed glass-door refrigerators) are subject to stricter global and regional energy regulations, including updates to U.S. DOE commercial refrigeration standards (effective 2025–2028), EU Ecodesign & Energy Labelling (Regulation 2019/2024 & 2019/2018), China GB standards, and equivalents aligned with ISO 23953. Key focus areas include lower Energy Efficiency Index (EEI) values, use of low-GWP refrigerants (e.g., R290 or optimized R134a/R404a), high-efficiency EC/ECM fans, improved insulation, and smart controls. Top-tier models target high energy efficiency grades (e.g., EEI significantly below baseline thresholds).

Our Product Advantages:

• Designed to meet or exceed 2026 high-efficiency requirements through premium compressors, optimized fan cooling, thick insulation, and LED lighting.
• Delivers excellent energy performance while maintaining superior merchandising visibility for beverages.

Our Beverage Display Cooler vs. Standard Models: 24-Hour Energy Consumption Comparison

For a typical 600–700L single/double-door upright glass beverage cooler (tested under standard conditions: 25°C/60% RH ambient, 0–10°C internal):

• Standard beverage cooler (older compressor, basic fans, conventional insulation): 24-hour consumption typically 8–14 kWh (higher due to heat infiltration through glass and less efficient components).
• GreenHealth High-Efficiency Model (Danfoss compressor, optimized fan system, smart controls, enhanced insulation): 24-hour consumption controlled to 5–9 kWh (load and environment dependent).

Energy Savings: 20–35% lower daily energy use compared to conventional units. Savings result from better sealing, efficient cooling cycles, reduced heat gain through heated glass doors, and lower auxiliary power (LEDs + fans). Larger multi-door models scale proportionally with efficiency gains.

Note: Data based on industry benchmarks and optimized testing. Actual consumption varies with ambient conditions, door openings, and product load. On-site measurement recommended.

Practical Tips: How to Use Beverage Display Coolers More Energy-Efficiently

1. Optimal Placement: Install away from heat sources (direct sunlight, ovens, AC vents, or high-traffic doorways). Maintain store ambient ≤25°C with good airflow around the condenser.
2. Temperature Settings: Set to the highest suitable temperature for your products (e.g., 4–8°C for most beverages instead of minimum). Every 1°C increase can save 3–5% energy.
3. Door Management: Ensure auto-closing doors function properly. Minimize unnecessary openings and avoid holding doors open. Check and replace damaged gaskets regularly.
4. Routine Maintenance: Clean condenser coils and evaporator every 1–3 months. Remove dust buildup to maintain heat exchange efficiency (can improve efficiency by up to 30%).
5. Lighting & Controls: Use LED lights with timers or motion sensors. Leverage the smart thermostat for precise control and automatic defrost optimization.
6. Additional Best Practices: Organize shelves for good airflow (avoid overloading), use night mode or lower settings during off-hours if available, and schedule professional servicing annually. These steps can yield an extra 10–25% energy savings.

Summary: The GreenHealth Pepsi-style beverage display cooler combines attractive, high-visibility merchandising with 2026-leading energy-efficient performance. It helps retailers reduce operating costs while boosting beverage sales through professional presentation.

Available in single to multi-door configurations, plug-in design, CE/RoHS certified. Custom branding options (e.g., Pepsi/Coca-Cola style) available. Contact us for latest quotes, technical specifications, and energy assessment support!

Beverage display cooler Refrigeration Equipment of Pepsi stand up fridge

1.Specifications:

2. Why choose us ?

1. Quality Control 
To ensure the quality of our vehicles and other products, Our QC staffs do strict supplier evaluations, in-coming inspections, in-process inspections, final inspections and pre-delivery inspections. The most important is that we listen to what our customers need and we are always looking for ways to improve the quality of our products through continuous improvement.

2. OEM Ability
We have built stable and long-term cooperate relationshilp with supermarkets,we canalso provide OEM and Agent services to our customers over the world.

3. Parts Available
We have spare parts for immediate delivery to anywhere in the world. While our equipments become standard with more features than anyone else, we also offer more optional parts for our equipmetns than anyone else.

4. Good Warranty
We take customer satisfaction and product quality as the first priority for us. We supply reliable warranties and good after-sales services.​​

(The more longer we also can accept)

4.Contacts: