What kind of harm does not need to cause cold cabinets for a long time?
What do you need to pay attention to when you use it again?
1. The hidden dangers that may cause after long -term suspension may cause the lubricating oil in the compressor to sink the bottom and stick to the bottom, and the working components in the machine are in a dry state. At this time, if it is not treated and uses it blindly, the piston of the compressor will work without lubrication, which will affect the service life of the compressor, causing economic losses.
2. How to start long -term suspension
Therefore, when the cold cabinet that is discontinued in winter is restored to use, it is best to put the cold cabinet in a room with a high room temperature, plug in the power supply to stop the compressor slightly, and then unplug the power plug. After a while (usually 5 ~ 10 is 5 ~ 10 Sim) then insert the power supply. After repeating 2 to 3 times in this way, the lubricating oil in the compressor can spray the motion components, so that they can get enough lubrication, and then make the cold cabinet officially enter the normal working stage. In this way, the compressor cylinder and other motor pieces can be avoided due to the absence of oil deficiency, and it can also make the cold cabinet enter the normal working state smoothly.
It is recommended that after the initial boot, if you encounter abnormal noise or stop, you cannot refrigerate, leakage and other faults, should be requested to repair the professionals of regular enterprises, and do not disassemble and repair it by themselves to avoid expanding the scope of failure.
Finally, arrange separate power lines and use special sockets for the cold cabinet. It cannot be used in the same planet with other electrical appliances, otherwise it will cause bad accidents. After installing the grounding device, the above conditions can be powered on the cold cabinet.
Send your inquiry directly to us