What is polyurethane panel and how to do the installation for a cold room

What is polyurethane panel and how to do the installation for a cold room ?

Polyurethane panel can also be used as cold room panel , but most of the contrast between cold room panel is embedded the lock inside the Polyurethane panel, during installation , the yin and yang tank buried lock the two panels overlap each other .

how to calculate the Polyurethane cold panel?

1. Design goals:

Built a tonnage of 40t, low temp. as -25 ℃, high temp. as 30 ℃ (ie inside the room is  -25 ℃, outside the room is 30 ℃) small freezer room, address in Guangzhou latitude of 26 °.

2.Instruction

   Structure

Design tonnage m=40t. density of the food e=350kg/m³. with the following Equation:

V=1000mj/pe

According to the Equation,we choose e=0.55.

V=207.8.Volume as 208m³.

So we get the dimension of the cold room as 26000*16000*5000mm (L*D*H).

The design as below:

After design will be the same as below:

Polyurethane Wall Panel Installation Process

Polyurethane Wall panel installation should be strictly in accordance with the specification and installation of drain board diagram, the first installation of Wall panels processing site in proper cut, tear bump slot on both sides of the surface film about 125px on the inside groove continuous sealant treatment.

Cold room ceiling panels Installation Process

Cold Room ceiling panels with steel purlins hanging, in order to ensure the integrity of the roof, try to avoid cutting panel , the width of the size of each block panel should be corresponding to the cold pipe or hanging position

Polyurethane cold panel mounting

Connection of wall and roof panels, reinforcement of the wall panel and steel support, ceiling panels and lifting frame, equipped with a special combination of accessories and special forms to ensure airtight refrigerator insulation, solid security. Each prefabricated panels are buried with a high strength locks, assembly is very convenient.

Features polyurethane cold panel

Polyurethane cold panel features: bump slot structure, improved insulation panel seams airtight, Special designed for freezer, warehouse. Panel with thermal insulation  excellent waterproof and fireproof performance.

The quality selection polyurethane cold panel for cold storage is very important, because unlike ordinary cold storage warehouse, generally are relatively low inside refrigerator temperature, and more for the air temperature, humidity, and environmental high requirements , so the choice of polyurethane cold panel is to pay attention to be sure to choose a better temperature control panels, a bad choice leading to difficult to control the temperature inside the refrigerator, it can easily cause inside of product deterioration, or make frequently working of compressors, wasting more resources and improve cost. Choosing Greenhealth Refrigeration in order to find the best refrigeration equipment.