2015-01-20
Cold Room Display Back Load Display Beverage Cooler Cold Room Storage and Display Multi Function
Glass door Cold Room for beverage displaying Frozen food display
Glass door Cold Room are ideal for display and storage of chilled products such as beverages, dairy products, flowers, ice cream, meat, etc. It is mainly applied to supermarket or flower store . our Glass door Cold Room is very hot sell in USA Canada Australia South America countries Middle East,ect .
Following is the 20 glass doors for beverage displaying
1. Glass door Cold Room External Dimension: 14000*1800*2200mm
2. Panel: 0.326mm painted galvanized steel polyurethane panel thick 100mm
3. Glass door size : W:695*H:1690 mm , with heater and LED Light .
4. Glass door Cold Room Temperature : 0~+8 degree C
5. Fittings : shelves , light , Ventilator ,electric wires ,ect .
6. With sides door for adding food
7. Glass door Cold Roompurpose is to display the beverage, milk , refrigerated food stuff in supermarket
Following is the L Model glass doors for beverage displaying
| SPECIFICATION | ||||||||||
| *High Temperature Resistant:-60 ~ +80celsius | *Anti-wind capability 55m/s | |||||||||
| *Anti-sun photochemical effect :Seal Rubber life time : 30 Years | *shock resistance 8 Grade 8 | |||||||||
| *salt spray test 4,,salt spray test 4 days , paint slightly rust allow , no rust on zinc coat . | *Outside shelter steel thick 4mm | |||||||||
| *inner interlayer thick 0.5mm | *Inner core materials heat transfer coefficient 0.027W/m.k | |||||||||
| *Inner core materials compression strength 100KPa | *adherence force 0.09MPa | |||||||||
| *Shear stiffness 0.1MPa | *Inner core materials Transverse rupture strength 500N/m2,1/250 | |||||||||
| *Inner core materials fire resistance B2 | *water absorptivity 4% | |||||||||
| *Roof load 1KN/m2 | *antistatic floor load 600KG/m2 | |||||||||
| *IP IP55 GB8624-1997B2 | *fire resistance According to B2 of GB 8624-1997 << Building Materials burning performance Hierarchical Methodology >> | |||||||||
| *Water-proof 0.2Mpa,10mm/min,30min,Endure water pressure 0.2Mpa; Water spray intensity :10mm/min .( for 30 min) No leakage inside | *relative humidity 5%~99% | |||||||||
| *Paint anti-corrosive paint( For container only) | *Load on floor 6KN/ m2 | |||||||||
Green&Health Refrigeration has 10year experience in all kinds of cold chain equipments,especially the cold room project.supermarket cold chain project...
Send your inquiry directly to us
