quality Commercial Display Freezer & Ice Cream Display Freezer factory

   I. Using a Cold Storage Facility   1. Understand Facility Specifications - Temperature Requirements: Set temperatures based on product needs (e.g., refrigerated: 0°C to 5°C; frozen: -18°C or lower). - Capacity and Layout: Plan storage space efficiently using racks and pallets for accessibility and space optimization. - Inventory Management: Use a First-In, First-Out (FIFO) system and inventory tracking software or barcoding for accurate stock control. 2. Loading and Unloading Procedures - Pre-Cooling: Cool products to the target temperature before storage to avoid temperature fluctuations. - Staging Area: Use a temperature-controlled staging area for loading/unloading to minimize exposure to ambient conditions. - Proper Stacking: Ensure space between pallets for air circulation; avoid overly tight stacking. 3. Temperature and Humidity Control - Monitoring: Install sensors to track temperature and humidity continuously, logging data for regulatory compliance (e.g., HACCP, FDA). - Alarms: Set up alerts for temperature deviations to ensure quick response. - Ventilation: Maintain adequate airflow for uniform temperature distribution. 4. Safety and Hygiene - Training: Train staff on handling, safety, and hygiene protocols to prevent contamination. - Personal Protective Equipment (PPE): Provide insulated clothing, gloves, and safety gear for low-temperature environments. - Sanitation: Regularly clean and sanitize the facility with food-safe agents, following a cleaning schedule. 5. Energy Efficiency - Insulation: Ensure walls, doors, and floors are well-insulated to reduce heat ingress. - Lighting: Use energy-efficient LED lights with motion sensors to save energy. - Door Management: Minimize door openings and use air curtains or strip curtains to prevent warm air infiltration.        II. Maintaining a Cold Storage Facility   1. Regular Inspections - Refrigeration Systems: Check compressors, condensers, evaporators, and fans for wear, leaks, or ice buildup. - Insulation and Seals: Inspect door seals, insulation panels, and flooring for damage to prevent heat loss. - Electrical Systems: Test control panels and backup power systems for reliability. 2. Preventive Maintenance - Scheduled Servicing: Service refrigeration units every 3-6 months, cleaning coils, checking motors, and replacing worn parts. - Defrosting: Regularly defrost evaporators to prevent ice buildup and maintain cooling efficiency. - Calibration: Periodically calibrate temperature and humidity sensors for accurate readings. 3. Emergency Preparedness - Backup Systems: Install backup generators or UPS to maintain operations during power outages. - Emergency Plan: Develop a contingency plan for equipment failures, including repair services and temporary storage options. - Spill Containment: Have protocols for handling refrigerant leaks or spills, complying with environmental regulations.  4. Record-Keeping - Maintain logs of temperature, maintenance, and cleaning activities for regulatory compliance and audits. - Use automated systems to track performance metrics and detect issues early. 5. Upgrades and Modernization - Energy Audits: Conduct audits to identify inefficiencies and upgrade to energy-saving technologies like variable frequency drives (VFDs) or high-efficiency compressors. - Automation: Implement automated temperature controls, inventory tracking, and alerts to reduce human error. III. Additional Tips - Regulatory Compliance: Adhere to standards like FDA, USDA, or ISO 22000 based on stored goods. - Staff Training: Regularly update training on procedures, safety, and emergency response. - Sustainability: Use eco-friendly refrigerants (e.g., ammonia, CO2) to comply with regulations like the Montreal Protocol.   Efficient and energy-saving cold storage equipment can help you improve efficiency and save energy, ensuring that your food does not spoil. If you need a cold storage, you can contact us.Welcome to visit our official website : http://www.commercialdisplayfreezer.com My WhatsApp:008615374066785

A vertical stainless steel freezer is a modern appliance that combines functional efficiency with professional-grade aesthetics. Popular in both residential and commercial kitchens, it offers numerous advantages in terms of space optimization, hygiene, temperature control, and user convenience. This article explores its key characteristics in depth, helping users understand why this type of freezer is a valuable addition to the modern kitchen. Stainless Steel Structure and Design One of the most notable features of a vertical freezer is its stainless steel construction. The material is known for its resistance to rust, corrosion, and bacterial growth. It provides a smooth, non-porous surface that is easy to clean and maintain, which is especially critical in food storage environments. The sleek, industrial finish also makes it visually compatible with a wide range of kitchen styles, from contemporary minimalism to commercial culinary setups. Vertical stainless steel freezers are typically designed with a tall, upright structure that minimizes floor space usage while maximizing storage volume. This vertical configuration makes them ideal for tight or narrow kitchen layouts where horizontal space is limited. The freezer’s clean lines and metallic finish contribute to a tidy, professional appearance. Internal Capacity and Storage Organization Another major advantage of upright freezers is their internal organization. Unlike chest freezers, which require users to dig through layers of food, vertical freezers feature shelving, baskets, and door bins that allow food to be stored and retrieved in a logical and accessible manner. Adjustable shelves help accommodate different sizes of food containers, while pull-out drawers and bins enable easier separation of meat, vegetables, frozen meals, and other categories. Users often appreciate how effortless it is to organize and find specific items. Many have commented that upright freezers eliminate the hassle of unloading large quantities just to reach something at the bottom. This is especially valuable in households or commercial kitchens where time and efficiency are crucial. Temperature Control and Cooling System Modern vertical freezers usually come equipped with precise temperature control systems. Digital displays and control panels allow users to adjust internal temperatures to suit different food preservation needs. Many models also include a "quick freeze" function that rapidly lowers the temperature, helping to lock in freshness, texture, and nutrients. Air circulation systems inside the freezer prevent frost buildup by distributing cold air evenly. This frost-free feature significantly reduces maintenance needs and eliminates the inconvenience of manual defrosting. Some users have mentioned that these automatic systems make the appliance feel truly “hands-free” and require minimal oversight. Energy Use and Efficiency While upright freezers may consume slightly more energy than chest freezers, due to their auto-defrost features and internal fans, their energy usage is still relatively efficient. Well-insulated walls made with high-density polyurethane foam help maintain low internal temperatures with minimal power input. Consumers who prioritize energy savings often look for models with eco-friendly designs, and they find that modern upright freezers can meet their expectations without sacrificing performance. Some people note that while energy consumption is higher than basic chest freezers, the added functionality and convenience more than justify the difference. Convenience and Ergonomics One of the most user-friendly aspects of vertical freezers is how they reduce physical strain. Because food items are stored on shelves at different heights, users don’t need to bend down to search for what they need. This vertical access is especially useful for older adults or people with back issues. Reviews often highlight how convenient and comfortable it is to stand upright while browsing through freezer contents. In addition, the presence of LED lighting inside the unit improves visibility, making it easier to locate items even in lower compartments. Soft-close doors, ergonomic handles, and anti-slam hinges further enhance the user experience, making daily interactions with the appliance smooth and pleasant. Noise Level and Maintenance Vertical freezers may produce more noise compared to chest freezers, as they contain additional mechanical parts such as fans, defrost heaters, and digital components. However, most users find the noise levels to be tolerable, especially in the context of kitchen environments where other appliances are also operating. Maintenance is generally minimal due to the no-frost technology. Interior components such as removable drawers and spill-proof shelves can be easily taken out and cleaned. Some models also have door alarms that notify users if the door has been left open for too long, helping to preserve food safety and prevent energy waste. Specialized Features and Versatility Many vertical freezers now include advanced features such as open-door alarms, temperature fluctuation alerts, and memory settings that restore the last temperature after a power outage. These innovations offer peace of mind, particularly for those who store valuable or sensitive frozen items. Some versions also offer modular storage systems, including pull-out freezer drawers and customizable compartments. These are particularly helpful in settings where users need to regularly reconfigure the storage space to suit changing needs. Whether it's a home storing weekly groceries or a kitchen prepping for a large event, these features provide the flexibility required for efficient operations. Commercial and Built-In Applications Thanks to their stainless steel construction and durable design, vertical freezers are also suitable for commercial kitchens, restaurants, and hotels. They can withstand higher usage volumes and more frequent door openings without compromising performance. Some units are designed for built-in installation, allowing them to be seamlessly integrated into cabinetry for a uniform, high-end look. In commercial environments, the upright structure also allows for faster inventory management. Staff can quickly scan shelves without opening multiple compartments or moving bulky items. This visibility leads to less food waste and improved kitchen workflows. Real-World User Feedback Many users report high satisfaction with the organizational capabilities and ease of access offered by upright freezers. Those who previously used chest models often remark on how much more efficient and enjoyable it is to use a vertical unit. Comments from users highlight the reduction in time spent searching for food and the improved cleanliness of the freezer interior. However, there are occasional concerns about freezer burn when items are stored for too long in frost-free models. Some users note that better packaging practices—such as vacuum-sealing or using airtight containers—can significantly mitigate this issue. In summary, users generally view vertical stainless steel freezers as a worthwhile investment for their combination of convenience, performance, and style. A vertical stainless steel freezer is more than just a place to store frozen goods—it is an integral part of a modern kitchen’s efficiency and cleanliness. With its vertical design, organized storage, precise temperature control, and durable stainless steel finish, it supports both everyday family use and high-volume commercial needs. Though it may carry a slightly higher price tag and use marginally more energy, the long-term benefits in usability, maintenance, and design integration make it a popular and highly rated appliance among both homeowners and professionals.Whether in a family home or a bustling restaurant kitchen, a vertical stainless steel freezer offers reliability, ease of use, and a modern edge that elevates food storage to a new standard. Finally, if you are looking for a reliable stainless steel freezer manufacturer, please contact us!Welcome to visit our official website : http://www.commercialdisplayfreezer.com My WhatsApp:008615374066785  

Recognizing the distinctions between self-contained and remote refrigeration systems is essential when selecting the most suitable cooling solution for your commercial foodservice operation. Self-contained models integrate both the cooling mechanism and storage compartment within one single unit, making them particularly well-suited for compact spaces or mobile setups. Conversely, remote refrigeration setups—commonly seen in walk-in coolers—position the compressor and condenser away from the storage area, enabling quieter performance and offering more options in system design. Let’s delve into the main considerations that can guide your choice between these two refrigeration types, helping you make a well-informed decision that aligns with your kitchen layout and financial plan. What Are Self-Contained Refrigeration Units? Self-contained refrigeration appliances are designed with all necessary components—like the condenser and evaporator—enclosed within the same housing. This design is the most prevalent in the foodservice industry, including refrigerators, walk-ins, and prep units, accounting for nearly 90% of the refrigeration solutions in commercial kitchens. Advantages of Self-Contained Refrigeration These units are especially favored in compact commercial environments due to their all-in-one design and simple setup. Self-contained refrigeration is perfect for businesses with space limitations or those needing transportable cooling systems. Key advantages include: Convenient Procurement: All the elements required to install a self-contained walk-in unit are included in a single package. Quick Setup: These systems are engineered for swift, hassle-free installation, making them ideal for businesses needing fast deployment with minimal disruption. Compact Footprint: Their integrated design saves valuable floor area, freeing up room for other equipment or storage purposes. Energy Savings: Many self-contained systems come with energy-efficient features, aiding in the reduction of power usage and operating expenses. Lower Service Costs: Fewer separate parts mean less complexity, which generally results in easier upkeep and lower repair expenses. Placement Flexibility: These units can be installed in a variety of locations throughout the kitchen or foodservice site, supporting diverse layout configurations. Disadvantages of Self-Contained Refrigeration Despite their convenience, self-contained systems may not meet the demands of larger or high-heat environments. Potential drawbacks include:   Limited Cooling Output: These systems are generally built for smaller operations and may fall short in high-volume or large-capacity cooling scenarios. Heat Generation: By releasing heat into the immediate surroundings, these units can increase ambient room temperatures, forcing the system to work harder and raising energy bills. Higher Noise Levels: Since the compressor and condenser are located inside the unit, these systems tend to be noisier—something to consider in open-concept kitchens or areas near customers. What Are Remote Refrigeration Units? Remote refrigeration units separate the condensing component from the evaporator, typically situating the compressor and condenser in a different area—such as outdoors, on rooftops, or in cooler utility spaces—depending on environmental conditions. This separation promotes quieter operation and improved heat dispersion. Benefits of Remote Refrigeration Remote refrigeration is especially beneficial for operations concerned about heat and sound, or where internal ventilation is restricted. These systems are widely implemented in large-scale commercial kitchens, supermarkets, and commissary environments. Benefits include: Minimized Heat Release: With components placed outside the kitchen, heat isn’t expelled into the workspace, helping maintain a cooler environment and easing the load on air conditioning. Reduced Operational Noise: The physical separation of key components leads to quieter function, contributing to a more comfortable dining and working atmosphere. Enhanced Energy Performance: In warm kitchen settings, equipment housed internally must work harder to maintain cool temperatures. Remote placement of the heat-generating parts allows for more efficient operation. Flexible Installation Locations: These systems can be placed away from the kitchen—such as on building exteriors or in utility zones—offering greater design and layout flexibility. Expandable Design: Remote refrigeration solutions can be upgraded or extended as business needs evolve, offering a scalable and adaptable cooling infrastructure. Drawbacks of Remote Refrigeration While advantageous in many respects, remote refrigeration systems also present a few challenges that should be considered: Higher Upfront Costs: Installation expenses tend to be greater due to the need for additional infrastructure like refrigerant lines, external compressors, and condensers. Increased System Complexity: These systems involve more intricate installation and maintenance, potentially leading to higher service costs and a greater need for experienced technicians. Additional Space Needs: Remote systems require designated areas for external units, which might not be practical in all commercial layouts and could limit design options. Potential Utility Costs: Although they often yield energy efficiency, extended refrigerant lines and separate power demands for remote units may offset savings, so evaluating total energy impact is important. Conclusion Choosing between self-contained and remote refrigeration depends on several key considerations, such as available space, noise restrictions, and maintenance preferences. Whether you're launching a new eatery or upgrading an existing kitchen, weighing your specific operational requirements and budget constraints will help determine the most appropriate refrigeration solution for your commercial needs.

Whether you are opening a new store or considering new equipment, you want to make sure you choose the best equipment for your needs. You not only have to consider what types of display refrigeration will be best for energy efficiency, but also what commercial refrigerator will help improve sales. You also need a commercial refrigerator that is convenient for customers and will keep food safe.   Energy Efficiency This is a very important consideration, as energy efficiency directly impacts your bottom line. The more display refrigerators you need, the more energy they consume. This can really hike up your energy bills. So, when it comes to display refrigeration, which is better at saving energy? At first glance, you might think the open display case is less energy efficient. Still, there are a few things to consider. First, display fridges that are open are designed to help contain cold air. However, there is no denying when you walk down the aisles in a grocery store with open displays, there is a distinct chill in the air. With doors, you also face issues, though. The constant opening and closing of the doors actually reduces energy efficiency. The busier the area, the more energy is lost, which affects fridge temperatures and the quality of your food. The best choice is to go with the closed display refrigeration with proper self-closing doors. This way, the cold air is contained when the fridge doors are closed, and you also reduce risk for cold air being wasted by doors that aren’t properly shut. Otherwise, you have to invest in expensive features for your open display fridge, such as shelf edge technology or night blinds so that you can close off the displays when the shop is closed.   Customer Convenience Open doored display refrigerators do have easier access for customers; they can just grab and go. However, on the negative side, that easy access also makes your cold storage aisle very uncomfortable for customers with all that chilly air. In the winter, this isn’t quite as noticeable, as people are dressed warmly. In the summer months, though, when people are dressed in light clothing, and the air conditioning is blowing down on them, shopping in the refrigerated aisles can be downright uncomfortable. This can make customers feel the need to leave quickly, so they miss out on opportunities to browse the choices available. This is not only bad for them, but also bad for sales. Additionally, as mentioned above, if you choose display refrigerators with easy access sliding, or self-closing doors, it is really not difficult for customers to just open the door to grab their food or drinks.   Placement Closed display refrigerators can be placed anywhere, while open display refrigeration cannot. If open display fridges are exposed to external air flow and drafts, it can lead to malfunctions. So, if you want your display case at the front of the store, for example, this could be problematic for open display cases. This is especially risky in the summer months when warm air can come into the store and affect performance. Other risks for airflow include air conditioning, windows, and fans, which can all negatively impact an open display case’s performance. The more drafts and temperature changes there are in the area, the more difficult it becomes for the open display refrigerator to maintain ideal temperatures.   Stocking Shelves Stocking shelves is a big consideration, as it takes time to complete this everyday task. Doors can get in the way for staff trying to keep the refrigerators stocked, so at first glance it seems the open display fridge wins out. However, while air flow is important for both open and closed fridges, you can’t block the return air flow for an open display refrigerator, as it overworks the system and leads to temperature fluctuations. Because of this, it can take longer to stock the fridge properly, as staff have to make sure they are leaving proper gaps between items. Worrying about air flow can take up more room, which means you might have to stock less items in the open display case. As a result, your team is stocking more often while also fussing over spacing. Your closed display refrigerator comes out ahead, as it might have a door, but it doesn’t take time trying to leave proper spaces to maintain air flow.   If you have any other needs to know, please visit our website or contact me.Welcome to visit our official website : http://www.commercialdisplayfreezer.com My WhatsApp:008615374066785

In the fast-paced environment of bars and restaurants, where efficiency is vital and guest satisfaction is key, having the appropriate equipment is critical. For venues that take pride in their wine offerings, a premium wine fridge is a must-have. But with so many models available, how can you determine which wine fridge is best suited for your establishment? This detailed guide will walk you through the most important features to consider, helping you find the ideal wine fridge for your restaurant or bar.   1,Storage Capacity: Start by assessing how much storage your business requires. Take into account how many bottles you typically keep on hand, the variety of wines you serve, and how much space you have available. For high-traffic venues, a larger wine fridge can reduce the need for frequent restocking by providing ample room to store a broad selection of wines.   2,Temperature Precision: Ensuring wines are kept at their optimal serving temperature is essential to maintaining their taste and quality. A wine fridge with accurate temperature control allows you to fine-tune settings for different wine types. If you serve both reds and whites, consider a dual-zone or multi-zone unit that can accommodate their distinct temperature needs.   3,Humidity Regulation: Aside from temperature, controlling humidity is also crucial for proper wine storage. Excess humidity can encourage mold growth, while insufficient humidity may dry out corks and ruin the wine. Choose a wine fridge that features humidity control to maintain the right balance and protect your wine collection.   4,UV Protection: Wine is sensitive to UV rays, which can gradually deteriorate its flavor and aroma. To safeguard your inventory, go for a fridge with UV-resistant or solid doors that block light exposure, thereby preserving the wine's integrity over time.   5,Quiet Operation: In a lively restaurant or bar, noise can impact the atmosphere. Select a wine fridge designed to operate quietly, featuring low-noise compressors and anti-vibration technology, so it won’t disturb your guests’ dining experience.   6,Energy Efficiency: As energy costs climb and sustainability becomes more important, an energy-efficient model is a smart choice. Look for fridges that offer a good balance between storage capacity and energy usage, and include features like LED lighting and high-quality insulation to cut down on power consumption and operating expenses.   7,Durability and Dependability: Since commercial settings demand constant use, durability and dependability are essential. Opt for a trusted brand with a reputation for sturdy, long-lasting appliances. Check product reviews and consult industry professionals to ensure you’re choosing a reliable wine fridge built to endure busy service conditions.   8,Ease of Maintenance: Time is limited in hospitality settings, so ease of cleaning and upkeep should be a priority. Models with removable shelves, smooth surfaces, and auto-defrost functions can simplify maintenance and keep your wines in ideal condition without added hassle.   9,Design and Style: Finally, think about how the wine fridge fits into your restaurant’s overall aesthetic. A sleek, modern design not only adds to the visual appeal of your space but also allows you to elegantly display your wine selection, enhancing the overall guest experience.   10,A well-chosen wine fridge is a key investment for any restaurant or bar aiming to elevate its wine service. By carefully evaluating factors such as size, temperature and humidity control, UV protection, sound level, energy efficiency, build quality, maintenance, and visual appeal, you can find a model tailored to your establishment’s unique demands. The right wine fridge will let you confidently present your wine offerings and provide guests with an outstanding experience, sip after sip.   Based on your needs and the above points, you should already know how to choose a suitable red wine refrigerated display freezer. If you need any help, please contact us.Welcome to visit our official website : http://www.commercialdisplayfreezer.com My WhatsApp:008615374066785

Before delving into the world of cake display fridges, it's crucial to understand your specific requirements and constraints. Your budget, the available space in your bakery, and the types of cakes you specialise in will all play a significant role in determining the ideal fridge for your business.   1. Assess Business Needs First Before exploring cake display refrigeration options, thoroughly evaluate your specific operational requirements and limitations. Your available budget, the physical dimensions of your bakery space, and the particular varieties of cakes you specialize in will critically influence which refrigeration unit best suits your business.   2. Calculate Spatial Requirements Determining optimal placement for your display unit is fundamental. Strategic positioning significantly enhances customer visibility and accessibility. Ideal locations include areas near the entrance or adjacent to point-of-sale counters, transforming the display into an eye-catching centerpiece. Prior to purchase, take precise measurements of your bakery layout to confirm the selected model integrates seamlessly into the allocated space, preventing logistical complications during delivery and installation.   3. Evaluate Storage Capacity Analyze your inventory volume requirements based on daily cake variety and turnover rates. Consider whether you operate a small artisan patisserie or a high-traffic café with extensive dessert selections. Audit the dimensions and quantity of cakes typically showcased simultaneously to identify adequate capacity. Ensure the unit accommodates current display needs while providing flexibility for future business expansion.   4. Prioritize Energy Efficiency Commercial display refrigerators offer environmental advantages alongside operational benefits. Energy-optimized designs substantially reduce electricity consumption, minimizing ecological impact. Even when working within budget parameters, selecting eco-conscious models delivers multiple advantages including long-term operational savings and enhanced brand perception through sustainability commitments.   5. Optimize Shelf Functionality Scrutinize shelving configurations critically. Adjustable shelf systems enable customization for diverse cake heights and platter sizes. Prioritize robust, non-corrosive shelves with smooth surfaces for effortless cleaning. Verify weight ratings exceed your heaviest creations to prevent structural compromise over years of service.   6. Implement Strategic Lighting Advanced LED illumination systems are essential for product presentation. Seek units with professionally positioned lighting that delivers bright, color-accurate visibility without generating uneven illumination or reflective glare. Energy-efficient LEDs simultaneously reduce power consumption while showcasing intricate decorative details on confections.   7. Balance Features and Budget Conduct thorough cost-benefit analysis when finalizing selection. While premium models offer extensive features, align expenditures with financial realities. Compare technical specifications and pricing across multiple manufacturers to identify optimal value. Remember that investing in commercial-grade durability and reliability ultimately supports long-term profitability more effectively than short-term cost reduction.   If you need to purchase cake display refrigerators or other commercial refrigerators, please contact us! Welcome to visit our official website : http://www.commercialdisplayfreezer.com My WhatsApp:008615374066785 Click to purchase: http://mao.ecer.com/test/commercialdisplayfreezer.com/sale-53349771-white-stainless-steel-glass-material-multiple-shelves-cake-shop-display-freezer.html

  If you operate a supermarket, butcher shop, or convenience store, having a reliable fresh meat display cooler is essential. It keeps your products safe, visually appealing, and within the right temperature range. Choosing the right unit can be challenging, especially with so many options available. This article will guide you through the most important factors to consider when purchasing a fresh meat display cabinet.   Know your product type Before buying a meat display cooler, consider the type of products you will store. Fresh meat, packaged meat, marinated cuts, and processed items may have different display and temperature needs. Some coolers are more suitable for raw meat, while others are better for pre-packed products. Understanding your product type helps you choose the most appropriate design and technology.   Measure your space You need to know exactly how much space is available in your store for the cooler. Measure both the length and depth of the area where you want to place the unit. Make sure there is enough space for customers to move around comfortably and for your staff to restock the cooler. Also, check if the cooler’s door or glass front needs extra clearance.   Choose the right capacity Select a cooler that can handle your average daily and weekly meat inventory. If the cooler is too small, you will constantly run out of space, leading to overcrowding and poor air circulation. If it’s too large, you may waste energy and money on unnecessary cooling. It’s best to choose a size that fits your usual needs, with a little extra space for busy periods.   Check the temperature range Fresh meat needs to be kept at a consistent temperature between -2°C and +2°C (28°F to 36°F). When choosing a cooler, make sure it can maintain this range accurately. A reliable cooling system is critical for food safety and product freshness. Also, make sure the temperature can be monitored easily, either with a built-in digital display or a manual thermometer.   Pay attention to humidity control Humidity is just as important as temperature when it comes to storing fresh meat. A cooler with proper humidity control prevents meat from drying out or forming a crust. If your products lose moisture, they will not only look less appealing but also lose weight and value. Choose a unit with built-in humidity regulation if you plan to store unpackaged meat.   Decide on the display style There are different styles of meat display coolers, such as open-type, glass-door, and serve-over counters. If you want customers to pick products themselves, go for an open or self-service design. If you want to maintain better hygiene and control, a serve-over counter is more suitable. Your choice should match the way you plan to sell the meat and the layout of your store.   Check the energy efficiency Commercial refrigeration units run continuously, so energy consumption is a key consideration. Look for a cooler with energy-saving features like LED lights, double-layer insulation, and an efficient compressor. Energy-efficient models may cost more upfront, but they will save you money on your electricity bill in the long run.   Evaluate the build quality The durability of your meat display cooler affects its lifespan and maintenance needs. A unit made with stainless steel or anti-rust material is easier to clean and more resistant to wear. The glass should be thick and tempered for safety. Well-built shelves and trays should be able to handle the weight of heavy meat packages without bending or breaking.   Consider ease of cleaning Fresh meat areas must be kept clean to avoid bacteria and contamination. Choose a cooler that is easy to clean, with removable trays, smooth internal surfaces, and good drainage. Some models also have automatic defrosting or cleaning systems, which can save time and reduce manual work for your staff.   Look at the lighting Good lighting makes meat look fresh and appealing. LED lighting is commonly used in modern display coolers because it is energy-efficient and enhances the natural color of meat. Avoid coolers with harsh or dim lights, as this can negatively affect the appearance of your products and reduce customer interest.   Review the maintenance and warranty Make sure the manufacturer or supplier offers reliable after-sales service. Check the warranty period and what it covers—compressor, electrical parts, or the full unit. Also, ask about the availability of spare parts and local service teams. A good warranty and maintenance support reduce the risk of downtime if the unit breaks down.   Think about future needs Your business may grow over time, so it’s wise to think ahead. Choose a meat cooler that can be integrated with additional units or upgraded easily. Flexibility is important if you plan to expand your product line or increase your storage capacity later. Avoid choosing a model that is already too limited for your business.   Compare multiple options Don’t rush your decision. Compare different brands, models, and suppliers. Read reviews, ask for recommendations, and request technical details or demonstrations if possible. Look beyond the price—evaluate the quality, performance, and long-term value. A slightly higher investment can give you better performance and lower maintenance costs.   Match the design with your store The appearance of your meat display cooler should blend well with your store’s overall design. A sleek and modern unit enhances the shopping experience and gives your business a professional image. Color, shape, and finishing all play a role in attracting customers and making your products look more appealing.

A commercial refrigerator usually runs all day and night. These strong cooling units need a large amount of power to function, which affects your electricity expenses. Many elements impact the energy use of a commercial fridge or freezer. Freezers normally consume more electricity than fridges because they operate at much lower temperatures. Fan-assisted models also use more power than units with static cooling, since their systems are more powerful. How can we lower electricity costs?     1. Make sure automatic defrost is working efficiently Commercial refrigerators often come with built-in automatic defrost systems. These might include off-cycle defrosting, heating elements on the evaporator, or a more advanced heating setup for larger units. Even though this function uses energy, it helps reduce costs if it’s operating properly, because a faulty defrost system can cause ice to gather around the evaporator coil. This makes the fridge work harder to maintain the correct temperature. It’s also important that the defrost cycle doesn’t run too frequently, as it can raise the internal temperature and reduce product lifespan.   2. Adjust heated glass door settings Display fridges in commercial settings use heated glass doors to stop fog and condensation. These doors help keep items inside clearly visible to customers and employees. Make sure the heating system can sense when heat is needed and switch off when it’s no longer necessary.   3. Check door seals are in good condition The rubber seals around fridge doors can wear out or get damaged over time. If the doors aren’t sealing properly, warm, moist air can enter the unit. This pushes out the cold air, making the fridge use more energy to stay cool. You may see more ice forming and other issues. The longer a damaged seal goes unnoticed, the more power is wasted. Regularly inspect and clean the seals, as food or dirt can create small gaps.   4. Keep coils clean Condenser coils can easily collect dust, grease, hair, and other dirt. Cleaning the coils helps the fridge release heat more efficiently and improves its performance. Likewise, the evaporator coils should stay free from ice and food particles, as ice works like insulation and makes the unit work harder.   5. Choose a good location for your fridge Make sure the area around your fridge is tidy and allows for good airflow. Dust can build up quickly on the condenser, and poor air circulation will lower efficiency. Check the maximum surrounding temperature the fridge is designed for, and avoid placing it in areas that are hot, humid, or close to heat sources.   6. Keep doors closed We’ve all heard the advice not to leave fridge doors open, but this is harder to control in a commercial space where customers may leave them open for too long. Before closing for the night, make sure all doors are shut tightly. Even a small gap left open overnight can waste a lot of electricity and increase your bill. For open-front coolers, use night covers to help keep the cold air inside and reduce energy use.   7. Use LED lights Lights inside refrigeration units use electricity. LED lighting can save a lot of power compared to older fluorescent lights. LEDs also last longer and reduce the need for frequent replacements, saving more energy and cutting waste. Upgrade your lighting to LEDs.   8. Buy energy-efficient refrigerators Choosing commercial fridges that save energy is an effective solution. Our company has many years of experience in designing, building, and selling commercial refrigeration units. Our products include fresh meat showcases, ice cream freezers, outdoor coolers, air curtain fridges, display fridges, and hot food cabinets. Whatever you are looking for, we have a solution. Click the link below to contact us.   Welcome to visit our official website : http://www.commercialdisplayfreezer.com My WhatsApp:008615374066785

  A glass-front refrigeration unit in retail environments serves not merely as a functional storage solution but as a strategic aesthetic asset. By employing imaginative approaches, this appliance can become an eye-catching installation that captivates shoppers and stimulates purchasing behavior. Explore these inventive presentation techniques to maximize your commercial freezer's visual and commercial potential.   1. Chromatic Arrangement A foundational yet impactful strategy involves organizing merchandise according to hue. Systematic color grouping enhances visual coherence while accelerating product identification. This methodology creates an ordered appearance while strategically emphasizing foreground items. Consider implementing vibrant chromatic zones aligned with seasonal demands - for example, summer-themed sections could showcase chilled beverages and frozen desserts.   2. Cyclical Seasonal Displays Periodically refresh freezer configurations to reflect seasonal transitions or approaching holidays. Implement festive winter arrangements during December promotions or curate cooling refreshment clusters for summer months. These tactical updates maintain visual novelty while creating urgency for time-sensitive purchases.   3. Premium Product Positioning Leverage consumer psychology by situating high-demand items at direct sightlines. Enhanced visibility of top-selling goods facilitates quicker purchasing decisions and increases turnover rates. Consider implementing shelf tags or micro-signage highlighting product popularity or limited-time availability to reinforce desirability.   4. Strategic Illumination Purposeful lighting transforms freezer aesthetics. Integrated LED systems enable targeted product highlighting and ambient enhancement. Illuminated shelf edges or focused spotlights can dramatically increase item visibility while creating welcoming visual warmth. Effective lighting serves dual purposes - aesthetic enhancement and improved shopping ergonomics.   5. Thematic Merchandising Develop narrative-driven displays through product grouping strategies. Create lifestyle vignettes like "Entertainment Essentials" (featuring artisanal cheeses and premium beverages) or "Wellness Selections" (showcasing organic snacks and cold-pressed juices). This approach stimulates complementary purchases while strengthening brand storytelling.   6. Interactive Sampling Stations Implement tasting initiatives near freezer units to drive product exploration. Position sample trays with promotional materials or digital coupon access points. This experiential strategy lowers purchase hesitation while generating valuable consumer feedback.   7. Dynamic Digital Integration Utilize integrated screens for multimedia product presentations. Display rotating content including preparation tutorials, ingredient provenance stories, or customer testimonials. This technology transforms static displays into informational hubs, particularly effective for new product launches or promotional campaigns.   8. Meticulous Maintenance Protocols Prioritize impeccable hygiene and organization. Implement daily glass cleaning routines, expired product removal systems, and frequent display rotations. A pristine presentation elevates perceived product quality and reinforces storewide professionalism.   9. Branded Visual Identity Incorporate corporate design elements through customized decals, color-coordinated shelf markers, or thematic graphics aligned with brand values. For eco-conscious retailers, natural textures and botanical imagery can reinforce sustainability messaging while enhancing visual appeal.   10. Modular Display Solutions Enhance functionality with adjustable shelving systems. Implement compartment dividers for category separation, tiered racks for vertical merchandising, and containment baskets for small items. These adaptive tools optimize space utilization while improving customer navigation efficiency.   Do you want to make your store more attractive by displaying refrigerators that are suitable for beverage refrigeration? Please contact me quickly!

  In today's competitive business environment, precise control over temperature-sensitive products is crucial, whether in catering, food processing, pharmaceuticals, floriculture, or scientific research. Commercial cold storage is more than just refrigeration equipment; it's a core component for safeguarding product quality, meeting regulatory requirements, reducing spoilage, and enhancing operational efficiency. Choosing the right commercial cold storage solution is a wise investment in the future development of your business.   Why is reliable commercial cold storage so important for your business?   1. Ensuring Product Quality and Safety: A stable low-temperature environment effectively inhibits microbial growth and slows down chemical reactions, maximally preserving the freshness, taste, efficacy, and safety of products like food, medicine, and flowers, meeting the stringent demands of consumers and regulatory bodies. 2. Reducing Waste and Spoilage: Unstable temperature fluctuations are a primary cause of product deterioration. A well-designed and reliably operating cold storage unit can significantly extend product shelf life, reducing economic losses due to spoilage or expiry. 3. Meeting Regulatory Compliance: Many industries, especially food and pharmaceuticals, have strict laws and regulations regarding product storage temperatures. A compliant cold storage system is the foundation for legal operation and avoiding penalties. 4. Optimizing Inventory Management and Operational Efficiency: Well-planned cold storage space facilitates more efficient inventory turnover and management. Whether it's a walk-in cooler or large-scale cold storage warehousing, it allows for orderly storage and convenient access to goods, boosting overall operational efficiency. 5. Enhancing Customer Trust and Brand Reputation: Consistently providing high-quality, safe products is key to building and maintaining customer trust. A reliable cold storage system is a strong backup for fulfilling this promise, helping to enhance your brand image.     Key factors to consider when choosing commercial cold storage:   1. Temperature Requirements and Range: Different products require different storage temperatures (refrigerated, frozen, ultra-low). Clarifying your specific needs is the first step. 2. Space and Capacity: How much storage space do you need? Do you require a small walk-in unit or large warehouse-style cold storage? Should you reserve space for future business growth? 3. Energy Efficiency: Cold storage units are significant energy consumers. Opting for units that utilize advanced energy-saving technology and excellent insulation can save substantial operating costs. 4. Reliability and Durability: Business operations cannot afford interruptions. Selecting high-quality compressors, refrigeration components, and panel materials ensures the cold storage can operate stably over the long term, reducing the risk of failure. 5. Customization Design: Standardized products may not fully meet your specific needs, such as special dimensions, partitions, door designs, or shelving systems. Finding a supplier capable of offering customized solutions is crucial. 6. Installation and After-Sales Service: Professional installation is key to ensuring cold storage performance. Equally important is whether the supplier can provide timely, reliable maintenance and technical support.  

When choosing the ideal cake display refrigerator for your bakery or café, it is essential to take into account several important factors to ensure it satisfies your business requirements and effectively highlights your delectable products. Here are some vital features to consider:   1,Temperature and Humidity Management When selecting a cake display refrigerator, temperature control is of utmost importance. You want to keep your cakes fresh and tasty, don't you? Seek out display refrigerators that come with advanced temperature and humidity control systems. These features ensure that your baked goods remain in peak condition, attracting customers with every glance.   2,Energy Efficiency and Environmental Friendliness In addition to preserving freshness, energy efficiency is a key consideration. Choosing an energy-efficient cake display refrigerator not only lowers your operating costs in the long term but also aligns with sustainability objectives. Despite initial worries about cost, these refrigerators turn out to be cost-effective investments over time, particularly given their specialized design for bakery use.   3,LED Illumination Enhance the visual allure of your baked creations with LED illumination, which casts a bright and even light within the display. LED lights offer superior brightness for highlighting your cakes while consuming significantly less energy than conventional lighting solutions. This feature not only effectively spotlights your offerings but also creates an attractive presentation that draws in customers.   4,Automatic Defrost for Hassle-Free Maintenance Ease your maintenance routine with the inclusion of automatic defrost capabilities. This feature prevents frost accumulation in your cake display fridge, minimizing the need for manual defrosting and boosting overall efficiency. With automatic defrost, you can devote more time to customer service and less to maintenance duties.   I believe that as long as you grasp the characteristics above, you can definitely choose a suitable cake display freezer for you.

一,Grasping the Various Kinds of Commercial Island Freezers Commercial island freezers are a vital piece of equipment for enterprises in the food sector, such as supermarkets, convenience stores, and restaurants. They offer a convenient and organized method for storing and displaying frozen food items for both staff and customers. However, when it comes to selecting the optimal commercial island freezer for your business, it's crucial to be familiar with the diverse types available on the market. In this comprehensive guide, we will provide an in-depth overview of the various types of commercial island freezers to assist you in making a well-informed decision.   1. Open Top Island Freezers Open top island freezers are a favored option for businesses seeking a convenient and accessible way to showcase their frozen products. These freezers are generally designed with a glass top that enables customers to easily view the items inside. This can be an effective means of attracting customers and promoting impulse purchases. However, it's important to consider the energy efficiency of open top island freezers, as the glass top can result in higher energy consumption compared to other types.   2. Closed Top Island Freezers Closed top island freezers are another alternative for businesses in search of a more energy-efficient solution. These freezers are designed with a solid top, which helps to retain cold air and reduce energy consumption. Although they may not offer the same level of visibility as open top freezers, they are a more cost-effective choice in the long term.   3. Combination Island Freezers For businesses that require both refrigerated and frozen storage, combination island freezers are the perfect solution. These versatile freezers feature separate compartments for refrigerated and frozen products, providing a wider range of storage options. This can be especially advantageous for businesses that offer a variety of frozen and refrigerated products, such as supermarkets with deli and frozen food sections.   4. Curved Glass Island Freezers Curved glass island freezers are designed to provide an appealing display for frozen products. The curved glass top not only enhances visibility for customers but also adds a sleek and modern appearance to the store. These freezers are often used for displaying specialty or high-end frozen products, as they can create an upscale look that appeals to customers.   5. Flat Glass Island Freezers Flat glass island freezers are a more straightforward and cost-effective option for businesses that want a functional freezer without unnecessary frills. These freezers feature a flat glass top that provides visibility for customers while also being more budget-friendly compared to curved glass freezers. They are a practical choice for businesses focused on functionality and value.   In summary, being knowledgeable about the different types of commercial island freezers is crucial for businesses aiming to make the best investment for their storage and display needs. Whether you prioritize visibility, energy efficiency, versatility, or aesthetics, there is a commercial island freezer that will meet your specific business requirements. By carefully evaluating the various options available, you can find the ideal commercial island freezer to enhance your business operations and attract customers with an appealing frozen display.   二,Key Considerations for Selecting a Commercial Island Freezer   1,When it comes to managing a business, particularly one that deals with the sale of frozen products, selecting the right equipment is essential. One of the most crucial pieces of equipment for businesses in the food and beverage sector is the commercial island freezer. These freezers are highly popular among businesses due to their ample storage space and customer accessibility. However, there are several important factors to keep in mind when choosing the ideal commercial island freezer for your business.   2,The first factor to evaluate when selecting a commercial island freezer is its size and storage capacity. The dimensions of the freezer should align with the volume of frozen goods you need to store and the available space within your business premises. It is vital to choose a freezer that can comfortably accommodate your inventory without occupying excessive space in your store. Additionally, consider the freezer's capacity in terms of its ability to hold a sufficient quantity of products and maintain the required temperature effectively.   3,Another significant factor to consider is the design and configuration of the freezer. Commercial island freezers come in various styles, such as open-top, glass-top, and sliding glass door models. The design and layout you choose should match your specific business requirements and the types of products you plan to store. For instance, if you sell items like ice cream or other frozen treats, a glass-top freezer can effectively showcase your products to customers. Conversely, if you prefer to keep your frozen goods concealed, a sliding glass door freezer might be more suitable.   4,Consistent temperature control is another critical factor when selecting a commercial island freezer. It is essential to choose a freezer that can maintain a stable and reliable temperature to ensure your products remain properly frozen. Some freezers offer advanced temperature control features, such as digital displays and adjustable settings, which can help you maintain the ideal temperature for your products.   5,Energy efficiency is also a vital consideration for businesses. Commercial island freezers can consume a considerable amount of energy, so selecting an energy-efficient model can help reduce operating costs. Look for freezers that are ENERGY STAR certified or feature other energy-saving technologies to lower your utility bills.   6,Lastly, consider the ease of maintenance and upkeep of the freezer. Opt for a model that is simple to clean and maintain to ensure it remains in optimal working condition. Some freezers come with features like self-cleaning condenser coils and automatic defrost functions, which can minimize the amount of maintenance required.   In summary, selecting the best commercial island freezer for your business involves carefully assessing several key factors. By evaluating the size and capacity, design and layout, temperature control, energy efficiency, and maintenance requirements of the freezer, you can choose a model that meets your business's unique needs and helps you deliver high-quality products to your customers.

1,Optimal Placement Position the refrigerator in a well-ventilated area, ensuring at least 1–2 inches of clearance around the unit (especially at the back and sides) to allow heat dissipation. Blocked airflow can cause the compressor to overheat, reducing efficiency and lifespan. Avoid placing it near heat sources like ovens or direct sunlight, as this forces the compressor to work harder.   2,Temperature Settings Set the temperature according to the stored beverages. For most drinks (e.g., sodas, beer), 34–38°F (1–3°C) is ideal. Use a calibrated thermometer to verify internal temperatures regularly. Modern units often include digital controls, but manual adjustments may require referencing the manufacturer’s guidelines.   3,Loading Guidelines Avoid Overloading: Overcrowding restricts airflow, forcing the compressor to cycle excessively and increasing energy consumption. Leave space between items to ensure consistent cooling. 4,Organize Strategically: Place high-demand products at eye level to enhance visibility while keeping heavier items on lower shelves. Rotate stock using the “first in, first out” principle to prevent expired products.   5,Door Management Minimize door openings to retain cold air. Frequent access introduces warm air, causing temperature fluctuations and condensation. For units with glass doors, ensure automatic door closers function properly.   6,Cleaning Protocols Daily: Wipe spills immediately to prevent mold or odors. Weekly: Clean glass doors, shelves, and seals with a mild detergent. Check door gaskets for debris or damage. Monthly: Vacuum condenser coils to remove dust, which can reduce cooling efficiency by 30%.

Maintenance Tips for Commercial Ice Cream Machines   As summer heat waves roll in, ice cream becomes the go-to choice for people to beat the heat and quench their thirst. For commercial establishments, an efficient and user-friendly commercial ice cream machine is undoubtedly a secret weapon to attract customers and boost sales. However, how to properly use and maintain a commercial ice cream machine, and extend its lifespan? This article will provide you with a detailed guide on the correct use and maintenance of commercial ice cream machines.   Daily Cleaning: After each use, promptly clean the residual material inside the machine to prevent bacteria growth. Use a soft brush or damp cloth to wipe the exterior of the machine and keep it clean.   Wear and Tear Parts Inspection and Replacement: Regularly inspect and replace wear parts such as sealing sleeves, scraper blades, and outlet valve seals. Replace these parts according to the recommended intervals in the machine's user manual.   Condenser Maintenance: Regularly clean dust and lint from the condenser to ensure proper heat dissipation. Avoid using screwdrivers or other hard objects to clean the condenser fins to prevent damage.   Reducer and Belt Maintenance: Regularly check the reducer for abnormal sounds, oil leaks, and other issues. Inspect the tightness of the belt and adjust or replace it as needed.   Electrical System Inspection: Regularly check the circuit and power cord for damage or aging. Ensure the reliability of the electrical system for safe use.   Professional Maintenance: It is recommended to have a professional conduct a comprehensive overhaul every six months or annually. Identify and resolve potential issues promptly to ensure stable machine operation.   Employee Training: Train employees on the correct use and maintenance of commercial ice cream machines. Improve employees' proficiency and safety awareness in machine operation.   Precautions   Always disconnect the power supply of the commercial ice cream machine before performing maintenance. When encountering issues that cannot be resolved, promptly call the manufacturer's service hotline or seek professional repair services. Maintaining good usage habits can extend the lifespan of the equipment.   Conclusion   Proper use and maintenance of commercial ice cream machines not only enhance the taste and quality of ice cream but also bring higher customer satisfaction and sales to commercial establishments. By choosing professional models, understanding machine structure, carefully preparing ingredients, correctly setting parameters, monitoring production progress, and properly storing and cleaning the machine, as well as regular professional maintenance and employee training, you will be able to easily unlock the secrets of summer sweetness and provide customers with unparalleled culinary delights.      

How to use a commercial ice cream machine correctly?     In the scorching summer, ice cream has become the first choice for people to cool down and quench their thirst. For commercial venues, an efficient and easy-to-use commercial ice cream machine is undoubtedly a secret weapon to attract customers and increase revenue. This article will provide you with a detailed explanation of the correct usage of commercial ice cream machines, making your business operations smoother and customer satisfaction skyrocketing. 1. Choose a professional model: When making a purchase, choose the most suitable model based on your actual needs, such as daily foot traffic, ice cream taste preferences, etc. Ensure that the machine has features such as efficient cooling, fast mixing, and easy cleaning.   2. Understand the structure and function of the machine: Carefully read the user manual to understand the working principles and operating methods of each part. Familiar with the various functions and settings on the control panel. 3. Food preparation and recipe adjustment: Select high-quality raw materials such as fresh cream, milk, sugar, and vanilla extract. According to customer taste preferences, flexibly adjust the formula to create unique flavors.   4. Set up and start the machine correctly: Set various parameters correctly according to the instructions, such as cooling temperature, stirring speed, etc. Ensure that all components are installed correctly and the power is turned on before starting the machine.   5. Monitor the progress of ice cream production: Real time monitoring of the mixing status and texture changes of ice cream through observation windows or display screens. When the ice cream reaches the desired texture, turn off the machine promptly.   6. Removing and storing ice cream: Use a specialized ice cream scoop or scraper to remove the ice cream and place it in a dedicated storage container. Ensure that the ice cream is kept in a low temperature environment to avoid spoilage. 7. Cleaning and maintenance Cleaning and maintenance of commercial ice cream machines are equally important. After each use, it is necessary to promptly clean the residues inside the machine to avoid the growth of bacteria. At the same time, it is necessary to regularly clean and maintain the machine to ensure stable operation and extend its service life.   Proper use of commercial ice cream machines can not only improve the taste and quality of ice cream, but also bring higher customer satisfaction and revenue to commercial venues.    

Commercial Refrigerator Not Cooling Well? Try These Solutions!     Commercial refrigerators are essential equipment in the catering, supermarket, and other industries, and their cooling performance directly affects the freshness and safety of food. If a commercial refrigerator experiences poor cooling performance, how should we respond? Below are some common solutions for you.       First, check if the power connection is normal. This is the most basic step. If the power connection is unstable or faulty, the refrigerator cannot cool properly. Therefore, ensure that the power plug is tightly inserted, the socket is stable, and check if the light inside the refrigerator is normally on to judge if the power is on.   Second, listen to the compressor's working condition. The compressor is the core component of the refrigerator's cooling system. If the compressor fails, the cooling performance will be greatly reduced. Normally, the compressor should emit a fine motor vibration sound. If the compressor cannot operate normally, it may be due to a broken high-pressure output buffer tube or loose fixing screws. In this case, open the casing, replace the new buffer tube, or tighten the screws. Next, check if the refrigerant in the cooling system is sufficient. Refrigerant is an important medium for refrigerator cooling. If the refrigerant is insufficient or leaks, the cooling performance will significantly decrease. You can let the refrigerator run for 3-5 minutes, then cut off the power and listen for a water flow sound to judge if the refrigerant is sufficient. If there is no sound, it means the refrigerant is depleted or leaked. At this point, you need to find the leakage point for welding, pressure testing, evacuation, and then refill the refrigerant to the appropriate amount.   In addition, capillary tube blockage in the refrigerator is also a common cause of poor cooling performance. When the capillary tube is blocked, the refrigerant cannot enter the evaporator to absorb heat, resulting in high refrigerator temperatures. In this case, dismantle the capillary tube for cleaning to ensure smooth refrigerant flow. Besides the above points, several other factors may also affect the refrigerator's cooling performance. For example, the thermostat setting is too high, excessive food storage or placing hot food inside, frequent door opening or poor sealing, direct sunlight or heat sources near the refrigerator, poor ventilation around it, etc. Therefore, when using the refrigerator, set the thermostat to a reasonable level, avoid overloading, minimize door opening, and maintain good ventilation around the refrigerator.   Finally, if the above methods cannot solve the problem of poor cooling performance, it may indicate a more serious malfunction in the refrigerator. In this case, it is recommended to seek the help of professional repair personnel to conduct a comprehensive inspection and repair of the refrigerator. In summary, poor cooling performance in commercial refrigerators is a relatively common issue, but as long as we master the correct solutions, we can quickly troubleshoot the problem and ensure the normal operation of the refrigerator. I hope the above content can be helpful to everyone!  

High-End Commercial Kitchen Freezer – Empowering Your Catering Business!   In the fiercely competitive catering industry, an efficient, hygienic, and aesthetically pleasing kitchen environment is crucial for success. Our high-end commercial kitchen freezer, with their exceptional design, superb craftsmanship, and user-friendly features, bring convenient management and hygiene safety to all types of commercial kitchens. Professional Design, Boosting Kitchen Efficiency Tailored to the high-intensity demands of commercial kitchens, our kitchen freezer feature professional-grade design that optimizes space layout, ensuring every inch is utilized efficiently. Whether it's storage freezer or worktables, they are meticulously planned to allow chefs to easily access required items during busy cooking processes, significantly enhancing kitchen operational efficiency.   Durable Materials, Ensuring Long-Term Use High-quality, corrosion-resistant materials such as stainless steel and wood veneer are selected to ensure that the kitchen freezer remain sturdy and durable in humid, high-temperature kitchen environments, withstanding deformation and cracking. The specially treated surfaces effectively resist oil and water stains, reducing cleaning difficulty and keeping the kitchen looking fresh and new at all times. Hygiene and Safety, Protecting Patrons' Health Hygiene is the lifeblood of the catering industry. Our commercial kitchen freezer feature seamless welding and easy-to-clean designs to prevent bacteria growth, ensuring hygiene and safety during ingredient storage and preparation. Additionally, all materials comply with food safety standards, providing your patrons with a reassuring dining experience.   Intelligent Management, Enhancing Operational Quality Incorporating smart elements such as intelligent temperature control systems and automatic induction lighting not only enhances kitchen convenience but also effectively conserves energy and reduces operational costs. Furthermore, our kitchen freezer support customized configurations, allowing adjustments to layout and functionality based on your actual needs, achieving intelligent and personalized kitchen management.   Choosing our high-end commercial kitchen freezer means you'll enjoy an efficient, hygienic, safe, and beautiful kitchen environment, injecting continuous vitality into your catering business. For any needs regarding commercial refrigerator products, feel free to communicate with us as we offer professional customization services.

Cold Storage: Unlocking Infinite Possibilities in Application Scenarios     In this era of pursuing quality and efficiency, cold storage—the core facility of cold chain logistics—is becoming an indispensable "guardian" across various industries, thanks to its unique preservation capabilities and wide range of application scenarios. From farm to table, from production line to consumer hands, cold storage, with its precise temperature control and efficient operation mode, safeguards every bit of freshness and unlocks infinite possibilities.   1. Food Preservation, Guarding Table Safety   In the food industry, cold storage is crucial for ensuring food safety and quality. Whether it's fresh fruits and vegetables, seafood and meat, or frozen food and pre-cooked meals, they all need to be stored at appropriate temperatures to maintain their taste and nutritional value. Cold storage provides an ideal storage environment for food through precise temperature control, effectively extending the shelf life of food and ensuring that every ingredient on the table remains in optimal condition, safeguarding consumers' health and safety.   2. Pharmaceutical Storage, Guarding Life Health   In the pharmaceutical industry, cold storage also plays a vital role. Many biomedical products, such as vaccines, sera, and biological agents, need to be stored under specific temperature conditions to ensure their activity and safety. Cold storage provides a stable and safe storage environment for these pharmaceutical products through strict temperature control, guarding life health and contributing to the development of the medical industry.   3. Chemical Storage, Guarding Production Safety   In the chemical industry, many raw materials and products need to be stored under specific temperature conditions to prevent deterioration or danger. Cold storage provides a safe and reliable solution for the storage of chemical products through precise temperature control, ensuring the safety and stability of production.   4. Agricultural Research, Unlocking Future Possibilities   In the field of agricultural research, cold storage also plays an indispensable role. By simulating different temperature environments, researchers can store and cultivate crop seeds, plant tissues, etc., study their growth patterns and genetic characteristics, and provide scientific evidence for the sustainable development of agriculture. The application of cold storage not only unlocks the infinite possibilities of agricultural research but also lays a solid foundation for the future development of agriculture.   Cold storage, the "guardian" of cold chain logistics, is safeguarding every bit of freshness and unlocking infinite possibilities with its wide range of application scenarios and exceptional performance. Whether you are a practitioner in the food industry or an expert in the fields of pharmaceuticals, chemicals, or agricultural research, cold storage can provide you with efficient, safe, and reliable solutions to make your career prosper further. Let's work together with cold storage to safeguard every bit of freshness and create a brighter future!        

Ice-Cold New Experience, Only in Beverage Display Refrigerator !       On scorching summer days, an ice-cold beverage is undoubtedly the best choice for beating the heat. In this competition for ice-cold refreshment, beverage display refrigerator are becoming a must-have for various venues, thanks to their superior performance and stylish design. Wide Range of Application Scenarios       Retail Stores: Whether it's convenience stores, supermarkets, or small retail shops, beverage display refrigerator are a powerful tool to attract customers' attention. They not only effectively display a variety of beverages but also maintain their optimal taste, allowing customers to enjoy the ice-cold flavor at first sip. Food & Beverage Venues: Beverage display refrigerator are indispensable in restaurants, cafes, bars, and other food and beverage venues. They not only provide a rich selection of drinks but also enhance the overall ambiance, making the dining experience more enjoyable for customers. Event Venues: At various outdoor or indoor events, such as music festivals, sports events, parties, etc., beverage display refrigerator add a touch of coolness to the scene. They allow event participants to enjoy ice-cold beverages anytime, adding more fun to the event.   Green&Health Beverage refrigerator: Significant Product Advantages Efficient Cooling, Keeps It Ice-Cold: Adopting advanced cooling technology, it ensures that beverages are always in the best preservation state. Whether it's the blazing summer heat or the cold winter chill, it maintains the ice-cold taste of beverages, making every sip a delightful experience. Stylish Design, Catches the Eye: Beverage display refrigerator feature a stylish and minimalist design with an elegant and generous appearance that perfectly blends into various environments. At the same time, they offer ample display space to showcase a variety of beverage types, satisfying the needs of different customers. Intelligent Control, Convenient Operation: Equipped with an intelligent temperature control system, it allows for temperature adjustment as needed to keep beverages at their optimal taste. Additionally, it features automatic defrosting and energy-saving functions, making operation more convenient and user-friendly. Safe and Reliable, Quality Assurance: Beverage display refrigerator are made of high-quality materials, offering excellent corrosion resistance and durability. At the same time, they come with multiple safety protection measures, such as overheat protection and leakage protection, ensuring safe and reliable use. In this season full of passion and vitality, let beverage display refrigerator be the choice for both you and your customers. They not only bring you an ice-cold experience but also enhance your business image, making every moment enjoyable!      

Outdoor Refrigerators: The Icy Guardian on Your Adventure Path     In the vast world of outdoor exploration, a high-performance outdoor refrigerator is undoubtedly a must-have gadget for every adventurer. It not only facilitates dietary needs during trips but also significantly enhances the overall adventure experience. Today, let's delve into the product features of outdoor refrigerators and feel their unique charm on the adventure path.   Product information click here: https://www.commercialdisplayfreezer.com/sale-49174004-150l-168cans-stainless-steel-solid-door-outdoor-beverage-refrigerator.html   1. Efficient Cooling, Long-lasting Freshness Outdoor refrigerators employ advanced cooling technology to quickly reach low temperatures and maintain a constant state. This efficient cooling capability ensures that food and beverages stay fresh and retain their flavor during long outdoor activities. Whether in the scorching heat of summer or the chill of winter, outdoor refrigerators provide the perfect icy experience. 2. Portable Design, Easy to Carry Considering the special nature of outdoor activities, outdoor refrigerators focus on portability in design. They typically use lightweight materials combined with compact structural design, making outdoor refrigerators manageable in both size and weight. Whether for hiking, self-driving trips, or camping picnics, outdoor refrigerators can be easily carried without adding to the burden of travel.   3. Durable Materials, Safe and Reliable Outdoor environments are diverse, so outdoor refrigerators are very particular about material selection. They generally use high-strength, corrosion-resistant materials to ensure stable performance under harsh conditions. Additionally, outdoor refrigerators incorporate safety designs such as leakage protection and explosion prevention to ensure safety during use. 4. Smart Control, Convenient Operation Modern outdoor refrigerators incorporate smart control technology, allowing users to remotely operate the refrigerator via a mobile app or remote control. This intelligent design enables users to keep track of the refrigerator's operating status anytime, anywhere, and adjust the cooling temperature or check food freshness as needed. This convenient operation adds even more fun to outdoor adventures.   5. Eco-friendly and Energy-saving, Green Travel In terms of eco-friendliness and energy saving, outdoor refrigerators also excel. Some products use solar charging technology, converting solar energy into electrical energy to power the refrigerator. This green, eco-friendly charging method reduces energy consumption and lowers environmental pollution.     In summary, outdoor refrigerators, with their product features of efficient cooling, portable design, durable materials, smart control, and eco-friendliness, have become invaluable assistants for outdoor adventurers. They not only facilitate dietary needs during trips but also enhance the overall adventure experience. In the future, with continuous technological advancements and innovations, outdoor refrigerators will bring more surprises and conveniences to outdoor adventurers.          

Energy-Saving New Trend: Tips for Reducing Power Consumption in Commercial Beverage Display chillers!   In this era of pursuing green living and energy conservation, every bit of energy saved is a gentle gesture to our planet. As an indispensable part of commercial spaces, how can commercial beverage display chillers achieve efficient energy conservation while ensuring that beverages are displayed attractively? Today, we'll reveal some practical tips to make your display chillers both beautiful and "low-carbon"!   Reasonably Adjust Temperature Settings Don't let a little craving for coldness become a big burden! Adjust the temperature settings of the display chiller appropriately based on the types of beverages and the external ambient temperature. Generally, keeping cold beverages at 4-7°C can maintain their best taste while also effectively conserving energy.   Regularly Clean the Condenser The condenser is the "radiator" of the display chiller. Dust accumulation can affect its heat dissipation efficiency, leading to increased energy consumption. It is recommended to clean it at least once a month to ensure smooth air circulation and boost refrigeration efficiency!   Utilize Nighttime Energy-Saving Mode If conditions permit, use the energy-saving mode or turn off some lights during nighttime or off-peak hours, as the temperature is lower at night, reducing the burden on the display chiller and effectively decreasing energy consumption.   Reasonably Plan the Layout Beverages should not be placed too densely, and appropriate gaps should be maintained to facilitate cold air circulation and improve refrigeration efficiency. At the same time, avoid frequent door opening, as each opening allows cold air to escape, increasing energy consumption.   Choose High-Efficiency Energy-Saving Equipment Investing in a commercial display chiller with a high energy efficiency rating may have a slightly higher initial cost, but in the long run, its exceptional energy-saving performance will significantly reduce electricity expenses, making it a true "long-term investment."   Install Sun Shades or Insulating Curtains For display chillers outdoors or near windows, installing sun shades can effectively block direct sunlight, reducing the impact of the external environment on the internal temperature of the display chiller and further lowering energy consumption.   Regular Inspections and Maintenance Regularly invite professionals to conduct comprehensive inspections and maintenance on the display chiller to ensure that the sealing strips are intact and the refrigeration system operates efficiently. Address small issues promptly to avoid larger problems that can lead to a surge in energy consumption.   Practicing these simple yet effective power-saving tips can not only save you considerable electricity expenses but also contribute to the environmental protection effort. Let's take action together to reduce the burden on our planet and create a better future!        

How to Choose Supermarket Combined Island Freezer   In the fiercely competitive retail market, supermarkets are not only venues for commodity transactions but also showcases for customer experience and brand image. As key elements for optimizing product layout and enhancing shopping experience, the selection and design of supermarket combined island freezer are crucial. This article will reveal to you how to choose supermarket combined island freezer, so that your supermarket can stand out among a myriad of commodities.   Define Needs and Plan Layout Firstly, clarify the supermarket's positioning, customer groups, and product categories, which will directly impact the style, size, and functional requirements of the island freezer. For instance, the fresh food section may require refrigerated island cabinet, while the daily necessities section is more suited to open display shelves. Based on the overall supermarket layout, plan the position and quantity of island freezer reasonably to ensure smooth foot traffic and avoid congestion. Durable Materials, Easy to Clean Supermarkets have complex environments, and island freezer must endure frequent use and cleaning. Therefore, selecting durable, easy-to-clean materials is essential. Stainless steel, glass, and high-quality synthetic materials are common choices. They are not only aesthetically pleasing but also effectively resist corrosion and scratches, facilitating routine maintenance and disinfection to ensure food safety and hygiene.   Flexible Combination, Adaptable to Changes With seasonal changes, promotional activities, or product mix adjustments, supermarket layouts often need to be modified. When purchasing, prioritize modular combined island freezer, which are easy to dismantle and reconfigure, allowing for flexibility in adapting to various changing needs and reducing renovation costs and time.   Energy Efficiency, Eco-First While pursuing economic benefits, environmental protection and energy conservation are also indispensable aspects. Choose commercial island freezer with energy efficiency labels that employ advanced refrigeration technology, effectively maintaining product freshness while reducing energy consumption and operational costs. Humanized Design, Enhanced Experience Excellent island cabinet design should fully consider the customer experience. Reasonable lighting arrangements can highlight product features and attract customer attention; comfortable shopping height designs allow customers to select products easily without bending or tilting their heads; additional shopping cart parking areas, product information signs, and other details further enhance shopping convenience.   After-Sales Service, Assurance of Hassle-Free Operation Lastly, good after-sales service is an important consideration in the purchasing process. Choose reputable brands and suppliers to ensure timely and professional support in installation, maintenance, and repairs, preventing equipment failures from affecting daily operations. Conclusion   Supermarket combined island freezer are not only carriers of products but also integral parts of a supermarket's brand image and customer experience. By carefully selecting and designing them, not only can the supermarket's operational efficiency and product display effectiveness be enhanced, but also a more comfortable and convenient shopping environment can be created for customers. We hope this guide helps you make a wise choice, allowing your supermarket to stand out in the fiercely competitive market and win the favor of more customers.

How to Save Electricity on Commercial Fruit Open Chiller ?     Commercial fruit air curtain display chiller, as indispensable fresh-keeping and display equipment in retail stores, have always been a focus of concern for merchants regarding their energy consumption. To effectively reduce the power consumption of commercial fruit air curtain display fridge, here are some practical energy-saving tips:   I. Optimize the Operating Environment   Reduce Ambient Temperature: The ambient temperature of the open chiller significantly affects its power consumption. Place the cabinet in a well-ventilated area, avoiding direct sunlight and heat sources, to reduce the ambient temperature and thereby decrease the compressor's operating time, achieving the purpose of saving electricity. Reasonable Layout: Ensure that there is sufficient space around the open display chiller for air circulation to prevent heat accumulation. At the same time, avoid stacking too many items in front of the chiller to avoid affecting the uniform distribution of the cold air curtain. II. Adjust Equipment Settings   Temperature Control: Reasonably adjust the temperature of the refrigerator according to the season and product requirements. Generally, a temperature range of 2~8°C is suitable for fruit preservation. In summer, adjust the temperature controller to a slightly higher position, and in winter, adjust it to a slightly lower position, to reduce the number of compressor startups and save electricity. Lighting Energy Saving: Moving the transformer of the interior lighting to the outside of the cabinet can reduce heat generation and save energy. Additionally, using energy-efficient LED lighting can also effectively reduce energy consumption. III. Improve Usage Habits   Reasonable Product Arrangement: When storing fruits, do so in moderation and in an orderly manner, avoiding excessive or overly dense stacking to ensure smooth air circulation within the open refrigerator and improve refrigeration efficiency. Regular Defrosting: Regularly cleaning the frost layer inside the air curtain fruits fridge can increase the evaporator temperature, extend the defrosting time, reduce the number of defrosting cycles, and thereby lower energy consumption.   IV. Choose High-Efficiency Equipment   High-Efficiency Compressors: Choosing compressors with high energy efficiency ratios and stable performance, such as those from renowned brands like Panasonic and Sanyo, can significantly improve refrigeration efficiency and reduce energy consumption. Optimized Outlet Design: Using high-efficiency honeycomb outlets can make the cold air curtain's airflow distribution more uniform, reducing the cabinet's load and lowering energy consumption. In summary, by optimizing the operating environment, adjusting equipment settings, improving usage habits, and choosing high-efficiency equipment, the power consumption of commercial fruit open display chillers can be effectively reduced. This not only helps merchants save operating costs but also contributes to environmental protection efforts.      

【The Ultimate Guide to Maintaining Ice Cream Display Freezer】     In the blazing summer heat, ice cream is not only a must-have for cooling down but also a sweet attraction for dessert shops and supermarkets. An efficient and clean ice cream display freezer is crucial for presenting this sweetness freshly. Today, let's delve into how to scientifically maintain your ice cream display freezer.   1. Regular Cleaning for Hygiene   External Cleaning: Use a soft damp cloth to wipe the exterior of the display freezer, avoiding abrasive cleaners to prevent damaging the surface material. For stubborn stains, use a mild disinfectant solution appropriately and ensure to wipe dry immediately with a clear water cloth to prevent water spots.   Internal Cleaning: Regularly (recommended weekly) clean the interior of the display freezer, including trays, shelves, and lighting equipment. Remove all ice cream, clean with a gentle disinfectant solution, rinse thoroughly, and dry. Check and clean dust and debris on the condenser to ensure efficient heat dissipation.   2. Temperature Management for Freshness   Precise Temperature Control: Adjust the display freezer to the appropriate temperature range (typically -18°C to -20°C) according to the type and storage needs of the ice cream. Too high or too low temperatures can cause ice cream to melt or crystallize, affecting its taste and quality.   Regular Temperature Checks: Use a thermometer to regularly check the internal temperature of the display freezer to ensure stability. If significant temperature fluctuations are observed, promptly inspect whether the thermostat is working correctly or consult professionals for repairs.   3. Avoid Direct Sunlight and Reasonable Layout   Away from Heat Sources: Ensure the display freezer is away from direct sunlight, heaters, and other heat sources, which can increase energy consumption and affect cooling performance.   Internal Layout: Arrange ice cream reasonably to avoid overcrowding that obstructs cold air circulation. Additionally, pay attention to the expiration dates on ice cream packaging, following the first-in, first-out principle to ensure product freshness.   4. Routine Maintenance for Longevity   Door Seal Inspection: Regularly check the door gaskets for damage, deformation, or aging. Compromised door seals can cause cold air leakage, increasing energy consumption.   Movement and Vibration: Avoid frequent moving of the display freezer to reduce vibration damage to the compressor and refrigeration system. If movement is necessary, always unplug first and handle with care.   Regular Defrosting: For automatic defrosting models, regularly check the defrosting function for normal operation; for manual defrosting, perform it based on frost build-up, generally once a month, to maintain optimal cooling efficiency.   5. Professional Repairs for Prompt Solutions   For issues that cannot be resolved independently, such as poor cooling performance or abnormal noise, promptly contact professional repair personnel for inspection and repair. Do not attempt to dismantle it yourself, as this may cause greater damage or safety hazards.   Through these meticulous maintenance practices, your ice cream display freezer will continue to operate efficiently, significantly enhancing the display effect and customer experience of ice cream, adding a beautiful highlight to your store.        

We sincerely invite you to attend the 2024 Canton Fair !   Dear sir / madam:   Hello! Thank you for your long-standing support and attention to the Green&Health Refrigeration Equipmemnt.   Our company will participate in the Canton Fair from October 15th to 19th, and we look forward to your visit.   Address: Pazhou Convention and Exhibition Center,No.382 Yuejiang West Road,Haizhu District, Guangzhou   Booth No. : 18.1 K24  

How to Choose a Cake Display Chiller: Creating a Visual and Sensory Feast for Your Dessert Shop In a dessert shop, the cake display chiller is not only a window for showcasing delicious treats but also an important element for attracting customers and enhancing the shop's image. A suitable cake display chiller can not only effectively preserve cakes but also, through exquisite display design, make every cake a double temptation for the eyes and taste buds. So, how do you choose a practical and beautiful cake display chiller? Here are some key factors and purchasing suggestions. 1. Define Your Needs and Plan Accordingly Before purchasing a cake display chiller, it is essential to define your needs. This includes the size of your shop's space, the types and quantities of cakes, and the expected display effect. Based on these needs, plan the size, shape, and layout of the display chiller accordingly. For example, if your shop space is limited, you can choose a compact, multi-layered display chiller to maximize every inch of space; if you specialize in high-end custom cakes, then a display chiller with a strong design sense and excellent lighting effects will better highlight the elegance and luxury of the cakes. 2. Focus on Refrigeration and Preservation The freshness of cakes is key to attracting customers. Therefore, when choosing a cake display chiller, pay attention to its refrigeration effect and preservation capabilities. A high-quality cake display chiller should have a stable refrigeration system that can precisely control the temperature and humidity inside the chiller, thereby extending the shelf life of cakes and maintaining their optimal taste and appearance. At the same time, choosing a display chiller with an automatic defrosting function can reduce maintenance costs and improve ease of use. 3. Lighting Design to Highlight Deliciousness Lighting is an important means to enhance the display effect of cakes. A good cake display chiller should be equipped with a high-quality lighting system, such as LED lights, which can provide soft and uniform lighting while also adjusting according to the color and shape of the cakes to create a more enticing visual effect. Additionally, some high-end display chillers are equipped with intelligent lighting control systems that can automatically adjust brightness based on time or ambient light, adding a sense of technology and fashion to the shop. 4. Material and Safety, Not to Be Ignored The material of the cake display chiller directly relates to its durability and safety. When purchasing, prioritize chillers made from food-grade stainless steel or easy-to-clean glass. These materials are not only corrosion-resistant and easy to clean but also effectively prevent the growth of bacteria, ensuring the hygienic safety of cakes. At the same time, pay attention to the chiller's sealing and insulation performance to prevent external contamination and temperature fluctuations from affecting the cakes. 5. After-Sales Service, Ensuring Peace of Mind When purchasing a cake display chiller, after-sales service is equally important. Quality after-sales service not only provides timely installation and commissioning services after purchase but also provides rapid response and repair services when the display chiller malfunctions. Therefore, before purchasing, understand the brand's after-sales service system, warranty policy, and maintenance response time to ensure your rights are protected. Conclusion Choosing a suitable cake display chiller requires comprehensive consideration of multiple aspects such as needs, refrigeration effect, lighting design, material and safety, and additional features. Through careful selection and thoughtful planning, a high-quality cake display chiller can not only enhance the shop's image but also provide customers with a more enjoyable shopping experience. We hope the purchasing suggestions in this article can add a unique charm and elegance to your dessert shop!  

What are the steps to customize a cold storage?     Customizing a cold storage facility is a process that involves multiple steps and considerations. Here is a detailed guide to help you understand how to customize a cold storage facility:   I. Clarify Requirements   Nature of Stored Items: Determine what items the cold storage will be used for, such as food, pharmaceuticals, or chemical raw materials, as this will directly impact the temperature and humidity requirements. Quantity and Scale: Estimate the quantity of items to be stored to determine the size and capacity of the cold storage. Frequency of Use: Consider the daily usage frequency of the cold storage to design a reasonable inbound and outbound process and layout. II. Select the Type of Cold Storage   Based on the requirements for storing items, choose the appropriate type of cold storage. Generally, cold storages can be classified into the following types:   Low-Temperature Cold Storage: Suitable for frozen food, pharmaceuticals, and chemicals, with temperatures generally below -18°C. Medium-Temperature Cold Storage: Suitable for fresh food, beverages, and tobacco, with temperatures generally between 0°C and 8°C. High-Temperature Cold Storage: Suitable for chilled beverages and alcoholic drinks, with temperatures generally between 8°C and 15°C.   III. Design and Planning   Structural Design: Plan the overall structure of the cold storage based on requirements, including the size, height, and number of layers of the storage body. Additionally, consider the insulation performance of the cold storage and select appropriate insulation materials and construction methods. Refrigeration System Design: Select suitable refrigeration equipment, such as compressors, condensers, and evaporators, based on the temperature requirements of the stored items, and plan the layout of refrigeration piping. Control System Design: Design a control system that includes temperature control, humidity control, and safety protection to ensure stable operation of the cold storage and automation management capabilities. Electrical System Design: Design the electrical system based on the power requirements of the cold storage, including cable selection, distribution box settings, and lighting systems. IV. Material Selection and Procurement   Select insulation materials, refrigeration equipment, control system components, etc., that meet the requirements based on the design plan, and ensure that the procured materials and equipment are reliable in quality and stable in performance.   V. Construction and Installation   Site Survey: Conduct a detailed survey of the construction site to understand the terrain, geology, water sources, power sources, etc., to ensure that the construction conditions are met. Construction Plan Formulation: Develop a detailed construction plan based on the design plan and site conditions, including construction processes, safety measures, and quality control. Construction Phase: This includes foundation construction, insulation layer construction, refrigeration system installation, control system installation, and electrical system installation. Each phase must be carried out strictly according to the construction plan to ensure construction quality and safety. VI. Debugging and Acceptance   System Debugging: Debug the entire cold storage system, including the refrigeration system, control system, and electrical system, to ensure that all systems work together normally. Performance Testing: Test the insulation performance, refrigeration effect, temperature and humidity control, etc., of the cold storage to ensure that it meets the design requirements. Acceptance and Delivery: After confirming that all performance indicators of the cold storage are qualified, conduct acceptance and deliver it to the customer for use.   VII. After-Sales Service and Maintenance   Provide comprehensive after-sales services to customers, including regular maintenance, troubleshooting, technical consultation, etc., to ensure that the cold storage maintains good operating conditions throughout its use.   In summary, customizing a cold storage facility requires comprehensive consideration of multiple factors. From clarifying requirements to construction and installation to debugging and acceptance, each step requires careful planning and execution. Through reasonable selection and configuration, a high-quality cold storage facility that meets your needs can be customized.      

Preserve Freshness, Start with Knowing How to Maintain Open-Type Meat Display freezer!   In today's pursuit of high-quality life, open-type meat display freezer are not only the stunning scenery in supermarkets and fresh food stores, but also vital partners in ensuring the freshness and health of ingredients. However, to keep this freshness and hygiene shining brightly, proper maintenance methods are crucial. Today, let's learn together how to maintain open-type meat display freezer!   Regular Cleaning for Hygiene   Cleaning is the first step in maintenance. It is recommended to thoroughly clean the open-type meat display case after each day's business. Use mild cleaning agents with soft cloths to gently wipe down the cabinet surface and interior shelves, removing residual bloodstains, grease, and odors. Avoid using cleaning agents containing corrosive chemicals to prevent damaging the cabinet material.   Maintain the Refrigeration System for Stable Temperature   The refrigeration system is the heart of the open-type meat display case, and its operation directly affects the freshness of meat products. Regularly check the operation of the refrigeration system, including the compressor, condenser, evaporator, and other components, to ensure they are functioning normally, without abnormal noises or overheating. Additionally, adjust the refrigeration temperature according to seasonal changes, setting it slightly lower in summer and higher in winter to maintain optimal preservation effects. Attend to Ventilation and Drainage   Open-type meat display freezer generate a certain amount of moisture during use, so maintaining good ventilation and drainage is essential. Regularly inspect the rear vents of the cabinet to ensure they are not blocked, allowing for smooth air circulation. Simultaneously, clean the drain holes to prevent water accumulation and the growth of bacteria, thereby safeguarding meat product safety.   Reasonable Arrangement to Avoid Congestion   When arranging meat products, avoid overcrowding and maintain proper spacing to allow cold air to circulate evenly, enhancing preservation effects. Additionally, refrain from placing heavy objects directly on shelves to prevent shelf deformation or damage.   Conclusion   Mastering the correct maintenance methods for open-type meat display freezer is a significant guarantee for safeguarding food safety and enhancing customer shopping experiences. Let's start now, pay attention to details, and carefully maintain each meat display case, making freshness and health the norm in our lives!

Commercial Display open chiller Maintenance Guide!   Want to keep your commercial display open chiller running efficiently, extend its lifespan, and ensure optimal food freshness? Follow our comprehensive maintenance guide to take care of your preserving powerhouse!   Daily Cleaning is a Must: After each day's business, use a soft cloth or sponge dampened with neutral cleaner to gently wipe down both the interior and exterior surfaces of the display open chiller, removing food residues and stains. Avoid using harsh chemicals as they can damage the cabinet material.   Maintenance: Regularly inspect the opening for any blockages, such as dust or paper scraps, and promptly clear them to maintain a smooth airflow. A functional is crucial for isolating external heat and maintaining low temperatures inside. Drain Hole Cleaning: The drain hole is essential for preventing water accumulation. Inspect and clean it regularly to prevent clogging that could lead to water spillage or internal moisture. Use a slender tool to gently clear any blockages, ensuring unhindered drainage.   Regular Defrosting: When frost builds up significantly on the inner walls of the display open chiller, perform a defrosting procedure promptly. Turn off the power, let the frost melt naturally, then dry the interior with a clean cloth to prevent water pooling. Avoid using sharp objects to scrape off frost, as this could damage the cabinet. Temperature & Humidity Monitoring: Regularly check the temperature and humidity levels inside the display open chiller to ensure they remain within the set range. Use a professional-grade hygrometer to measure and adjust the settings on the control panel as needed.   Gasket Inspection: The gasket of the display open chiller is vital for maintaining low temperatures inside. Regularly inspect it for signs of aging, deformation, or damage. Replace worn-out gaskets promptly to ensure optimal sealing performance. Electrical Components Maintenance: Routinely check the power cord, plug, and fuse of the display open chiller for any signs of wear or damage to prevent electrical hazards like short circuits or leaks. In open chiller of any abnormalities, immediately discontinue use and contact a professional for repairs.   Annual Professional Maintenance: In addition to daily and routine maintenance, it is recommended to have a professional conduct a thorough inspection and maintenance of the display open chiller at least once a year. They will perform a deep clean and inspection of the refrigeration system, electrical system, and other components to ensure optimal performance. By following this comprehensive maintenance guide, your commercial display open chiller will continue to operate efficiently for a long time, providing reliable protection for your store's food freshness!      

Commercial Island Display Freezer: The Perfect Union of Preservation and Display   Commercial island display freezer, as indispensable display and storage equipment in modern supermarkets, have gained widespread market recognition due to their unique advantages and diverse application scenarios.   Advantages:   Superior Preservation Capabilities: Equipped with advanced cooling technology, commercial island display freezer precisely regulate internal temperatures, ensuring that ingredients retain their freshness and nutrients under optimal storage conditions. Whether for chilled or frozen foods, these freezer provide impeccable preservation, extending product shelf life. Open Display Design: The open design of these display freezer allows customers to easily select products without bending or reaching. This not only enhances shopping convenience but also increases product visibility and attractiveness, ultimately boosting sales. Flexible Layout and Diverse Designs: Commercial island display freezer can be customized to meet the specific needs and spatial layouts of supermarkets. Additionally, their diverse design styles and color options blend seamlessly with the overall decor of the supermarket, enhancing the overall aesthetic appeal of the shopping environment. High Efficiency and Energy Savings: With continuous technological advancements, these display freezer have significantly improved in energy efficiency. Featuring advanced energy efficiency ratios and intelligent temperature control systems, they maintain excellent preservation while effectively reducing energy consumption, saving operational costs for supermarkets. Easy Cleaning and Maintenance: The rational structural design of commercial island display freezer facilitates easy cleaning and maintenance. Regular cleaning of condensers and replacement of filters are simple tasks that maintain the optimal operating condition of the equipment, extending its service life.     Application Scenarios:   Fresh Food Section: Commercial island display freezer are ideal for the fresh food section. They preserve the freshness of meats, seafood, vegetables, fruits, and other ingredients, allowing customers to enjoy the freshest flavors during selection. Frozen Food Section: For frozen foods such as quick-frozen meals and ice cream, commercial island display freezer excel. Their low-temperature environment effectively inhibits bacterial growth, ensuring food safety and quality. Beverage Section: In supermarket beverage sections, these display freezer showcase a variety of chilled beverages and yogurts. The open design allows customers to effortlessly select their preferred drinks, enhancing the shopping experience. Specialty Product Display Areas: Supermarkets can also utilize commercial island display freezer to create specialty product display areas for imported foods, high-end supplements, and more. Through exquisite layouts and displays, these freezer capture customers' attention, elevating product value and boosting sales.     In conclusion, commercial island display freezer, with their superior preservation capabilities, open display design, flexible layouts and diverse designs, high efficiency and energy savings, as well as ease of cleaning and maintenance, have found widespread application in supermarket fresh food, frozen food, beverage, and specialty product display areas.  

Variable frequency beverage display fridge - leading the future beverage refrigeration   The variable frequency beverage display fridge is not only a display device, but also a perfect integration of technology and aesthetics, designed specifically for modern beverage retailers who pursue quality and efficiency. 【Intelligent Variable Frequency, Energy-Saving Efficiency】 Equipped with advanced variable frequency compressor technology, inverter beverage chiller automatically adjusts its operating frequency based on ambient temperature and fridge load, achieving up to 30% more energy savings than traditional fixed-frequency display fridges. This ensures optimal beverage storage temperatures while significantly reducing operational costs, offering long-term economic benefits for businesses.   【Precise Temperature Control, Preserving Freshness】 Featuring high-precision temperature sensors and intelligent control systems, it maintains a precise temperature range of ±0.5℃, ideal for everything from chilled juices and dairy products to cool carbonated beverages. Each sip remains as fresh and delicious as the first, satisfying even the most discerning customers' quality expectations. 【Intelligent Lighting, Attracting Attention】 Employing LED energy-saving lighting technology, it not only conserves energy but also illuminates every bottle and can with soft, even light, drawing customers' attention and stimulating purchase intent. With multiple lighting modes, merchants can adapt to festive atmospheres or promotional activities, creating unique shopping experiences.   【Large Capacity Design, Effortless Display】 Boasting adjustable shelves, it accommodates a wide range of beverage sizes and types. Its ample storage capacity eliminates the need for frequent restocking, effortlessly managing peak sales periods. Optimized airflow ensures even cooling throughout, preserving freshness in every corner. 【User-Friendly Design, Effortless Operation】 Equipped with a touch-sensitive smart panel, it offers intuitive controls for setting temperature, lighting, and more. Real-time monitoring of device status ensures smooth operation. With self-diagnostic fault indication, maintenance becomes hassle-free, keeping operations running smoothly.   【Eco-Friendly Materials, Safe & Healthy】 Constructed with non-toxic, eco-friendly materials, its interior and exterior surfaces are easy to clean, preventing bacterial growth and ensuring a hygienic storage environment for beverages. Customers drink with confidence, and merchants sell with peace of mind.   Inverter beverage refrigerator – leading the future of beverage retail with technology, enhancing brand image, attracting customers, and boosting revenue. The smart choice for your business!  

Does your beverage coolers have a better price compare with others? Does it consume a lot of electricity? What will after-sales policy be like?   Green&health refrigeration equipment company beverage refrigerators have advantages in terms of price, power consumption, and after-sales policy. We are committed to providing customers with high-quality products and services to meet their various needs.   I think the price is competitive, see below: High cost-effectiveness: While ensuring quality, our beverage chillers have optimized design and production processes to reduce costs, thereby providing customers with more competitive prices. Multiple options: We offer a variety of beverage fridges with different capacities and functions to meet the needs of different customers as clients budget and requirements. Promotional activities: We regularly launch promotional activities such as special offers and discounts for bulk purchases, reducing customers' purchasing costs.   II. Power Consumption   Green&health refrigeration equipment company beverage refrigerators adopt stable energy-saving technology to ensure stable supermarket freezer performance while minimizing energy consumption. Specific power consumption varies depending on factors such as product model and usage conditions. But if wanna further reduce power consumption, you can consider the following points:   Proper placement: Avoid placing the refrigerator in direct sunlight or areas with excessively high temperatures to reduce the refrigeration burden. Reduce door openings if possible: Frequent door openings can lead to cold air loss and increased power consumption. Regular cleaning: Keeping condenser fin clean and it can help improve refrigeration efficiency and reduce energy consumption. III. After-sales Policy   We highly value after-sales service and provide customers with a comprehensive after-sales policy to ensure they have no worries during usage. The specific after-sales policy includes: Warranty period: Our commercial beverage coolers offer a 1-year free warranty service. During the warranty period, if any malfunction occurs due to product quality issues, we will provide free repair or replacement services. On-site service or online service: Upon receiving customer repair requests, we will arrange for technical personnel to provide on-site repair services or remote online guidance as soon as possible. Accessory support: For any normal wear and tear of product accessories during the warranty period, we will send original factory accessories to you for free replacement.  

Is there a discount for bulk purchases?     It should be discussed by team according to order.   As you know, green&health refrigeration equipment company is a manufacturing enterprise integrating R&D, manufacturing, and sales of commercial refrigeration equipment. Our products include a series of supermarket display freezers, stainless steel kitchen freezer, cake display showcase, ice cream display chiller, ice makers, cold storage rooms, and other related products. If you have bulk purchase requirements, we can offer a series of exclusive preferential policies and support services to bring you a more economical, efficient, and mutually beneficial purchasing experience. The specific preferential programs will be comprehensively evaluated based on factors such as your purchase quantity, product types, payment terms, etc., including but not limited to: Price discounts: According to your purchase quantity, we will provide tiered price discounts to ensure that you enjoy more preferential prices for bulk purchases. Customized services: If you have specific customization requirements for products, such as color, size, or functional adjustments, we will provide personalized customization services based on your requirements and may offer additional discounts accordingly. Fast delivery: We possess strong production capabilities and a robust supply system, ensuring the timely delivery of large-volume orders. Upgraded after-sales service: For customers who make bulk purchases, we will provide priority after-sales service support, including equipment installation guidance, subsequent technical consultations, extended warranty periods, and regular follow-up visits. To provide you with more accurate quotations and preferential programs, we hope to further communicate with you to discuss your specific needs in detail and offer customized solutions.    

Copper tube or aluminum tube is used in commercial refrigeration system?     For commercial freezer, use copper tube is better than aluminum, but some supplier will use aluminum pipe instead of copper because of cost. But green&health refrigeration equipment company use copper tube for all machine to ensure supermarket freezer has a better performance. But below list some different points between copper pipe and aluminum pipe for reference.   Advantages of copper pipes:   High thermal conductivity: Copper has a very high thermal conductivity, enabling rapid heat transfer and more effective refrigeration. Good corrosion resistance: Copper is not easily oxidized or corroded, providing good corrosion resistance and ensuring a long service life for refrigeration pipes. Excellent weld ability: Copper pipes are easy to process and connect, making them highly suitable for creating complex pipeline structures within freezers.   In supermarket freezers, copper pipes are often used in high-end models or scenarios requiring higher refrigeration efficiency and durability. For instance, oxygen-free copper pipes, which have undergone deoxidization treatment, boast low internal impurity content, superior thermal conductivity, and excellent corrosion resistance, thus widely applied in refrigeration equipment and air-conditioning fields.   Advantages of aluminum pipes:   Lightweight: Compared to copper pipes, aluminum pipes have a lower density and lighter weight, helping reduce the overall weight of freezers.   Easy processing: Aluminum pipes exhibit good processing properties, allowing for the creation of intricate refrigeration pipeline structures.   Good strength: Although aluminum's strength is slightly inferior to copper, it is sufficient to withstand various pressure changes in the refrigeration system of freezers.   For commercial freezer, use copper tube is better than aluminum, but some supplier will use aluminum pipe instead of copper because of cost. But green&health refrigeration equipment company use copper tube for all machine to ensure supermarket freezer has a better performance.    

Is it better to choose direct-cooling freezer or fan-cooling for supermarket? Should I buy one with an automatic defrost function?     That depends on 2 factors: frequency usage and budget.   If high-frequency use and demanding precise for cooling control, and require auto defrost, then fan cooling freezer is better. For this, i will suggest green&health refrigeration equipment is good at this area since 2010. As you know, the fan cooling cost is higher than direct cooling( see below points), and you will know how to choose freezer for your shop. Comparison between Direct-Cooling and Fan-Cooling Direct-Cooling Method Advantages: Relatively low power consumption and noise levels. Higher effective volume in the same size. Better for food preservation as it is less prone to drying out. Disadvantages: Requires manual defrosting, increasing maintenance costs and time. Slower cooling speed and less even temperature distribution. Fan-Cooling Method Advantages: All machine automatic defrost function once turn on. Evenly cooled with precise temperature control through forced air circulation. Reduced chances of food freezing in clumps and cross-contamination of flavors. Disadvantages: Potentially higher noise levels. Food can dry out easily, especially in drier environments. II. Should I Buy a Freezer with a Defrost Function?   Total agree if the budget permission. Because fan cooling system with defrost is Easy to use, saves time and decrease maintenance cost compare with direct cooling.  

Commercial Fresh Meat Display freezer: Enhancing Food Quality and Customer Experience     In today's fast-paced society, people's demands for food extend beyond mere satisfaction of hunger; they now prioritize freshness, safety, and visual appeal. Commercial fresh meat display freezer, as vital equipment in the food retail industry, are becoming a bridge between businesses and consumers with their unique functional design. These freezer not only ensure food quality but also greatly enhance the shopping experience for customers.   1. Preservation and Display, Clear at a Glance   Utilizing advanced refrigeration technology, fresh meat display freezer can precisely control the temperature and humidity inside, effectively inhibiting bacterial growth and extending food freshness. With transparent glass doors or open designs, customers can clearly browse the array of food items without opening the cabinet doors, stimulating their desire to purchase through the visual appeal of color, presentation, and every detail.   2. Enhancing Food Safety Standards   Food safety is the lifeline of the food industry. By maintaining a stable low-temperature environment, commercial fresh meat display freezer slow down the process of food spoilage and reduce the risk of cross-contamination, ensuring that food meets safety standards from production to sale. This not only protects consumers' health but also strengthens businesses' reputation in terms of food safety.   3. Optimizing the Shopping Environment, Enhancing Customer Experience   A clean and bright display environment is key to attracting customers. Fresh meat display freezer, with their modern exterior design combined with internal LED lighting, create a high-end and hygienic shopping atmosphere. Shopping for food in such an environment allows customers to directly perceive the freshness and appeal of the products while enjoying a more comfortable and pleasant shopping experience, thereby enhancing their goodwill and loyalty to the brand.   4. Boosting Sales and Improving Operational Efficiency   Effective display directly impacts sales performance. Fresh meat display freezer, through efficient food presentation, make popular items more prominent, facilitating quick purchase decisions for customers. Additionally, the rational layout within the freezer also facilitates inventory management and stock replenishment for employees, improving work efficiency and reducing customer waiting time, further promoting sales growth.   In summary, commercial fresh meat display freezer are not only important tools for food preservation but also multifunctional platforms that enhance customer experience, strengthen brand image, and drive sales growth. In the competitive food retail market, choosing the right display freezer will undoubtedly provide businesses with a significant competitive advantage.  

How to Use and Operate Commercial Freezers ?     1.Pre-startup Preparation:   Ensure the freezer is placed on a flat, well-ventilated surface, away from heat sources and direct sunlight. Allow new or moved freezers to rest for 2-6 hours before powering on and run them empty for 2-6 hours to stabilize the internal temperature. 2.Temperature Adjustment:   Adjust the temperature based on seasons and stored items. In summer, set the thermostat to a slightly higher temperature to reduce compressor runtime and energy consumption; do the opposite in winter to ensure optimal freezing. (Reference temperature for refrigeration of various foods: Beverages: 2-10 ℃, fruits and vegetables: 5-10 ℃, dairy products: 0-5 ℃, fresh fish and meat: -2~2 ℃) 3.Placing Goods:   Leave gaps between goods to ensure proper air circulation. Allow hot food to cool to room temperature before placing it inside. 4.Routine Maintenance:   Regularly clean both the interior and exterior of the freezer with mild detergents, avoiding corrosive cleaners like abrasive powders or alkaline solutions. Check and clear the drain holes to prevent clogging. 5.Defrosting:   Direct-cooling freezers require periodic manual defrosting to prevent thick ice from affecting cooling efficiency. Automatic defrost freezers do not require manual intervention, but note that the temperature may rise slightly during the defrost process. 6.Safety Precautions:   Use a dedicated, grounded three-prong power outlet. Avoid cluttering around the freezer or placing it too close to walls for better ventilation and safety.    

Dessert Temptation - Premium Cake Display Case   A Visual Feast, Prelude to Delight Step into our world of desserts, and the first thing that captures your attention is this meticulously designed cake display case. More than just a showcase for art pieces, it's a magical box that ignites customers' boundless imagination and sweet desires. With high-transparency tempered glass doors and a soft LED lighting system, every cake seems enchanted, colors more vibrant, details crystal clear, leaving a lasting impression and an irresistible urge to indulge in that exquisite perfection. Product information: https://www.commercialdisplayfreezer.com/sale-12432740-r404a-refrigerant-bread-cake-display-freezer-size-1800-730-1500mm.html Preservation Technology, Locking in Freshness Every Moment We understand that freshness is the prerequisite for deliciousness. Hence, this cake display case is equipped with an advanced temperature and humidity control system, precisely maintaining the ideal environment to prolong the freshness of cakes, ensuring that from dawn to dusk, every bite is as fresh as the first. From the creamy smoothness, the fruit's sweetness, to the cake's fluffiness, every element is perfectly preserved, offering a pure culinary delight. Intelligent Management, Convenience and Efficiency Featuring a smart touch control panel, operation is effortless and swift. Effortlessly set temperatures, humidity, and lighting modes, and even monitor and adjust remotely for hassle-free store management. Its low-noise operation design ensures a serene shopping experience even during peak hours. Eco-Friendly Materials, Safe and Healthy Crafted from high-quality eco-friendly materials, the cabinet is non-toxic, odorless, and easy to clean and maintain. The interior employs food-grade stainless steel, resistant to corrosion and easy to sanitize, ensuring the utmost safety and peace of mind for food storage. Versatile Design, Fitting Multiple Scenarios Whether it's a high-end bakery, coffee shop, dessert house, supermarket, or the dessert section of a restaurant, this cake display case seamlessly blends in, becoming a captivating focal point. Its elegant appearance and powerful display capabilities elevate your store's image while effectively boosting sales, taking your business to new heights. Limited-Time Offer, Not to Be Missed Order now and enjoy exclusive discounts! We promise comprehensive pre-sales consultation and after-sales service, ensuring a hassle-free purchase and even more reassurance during use. Act swiftly and let this premium cake display case shine as the star in your store, jointly embarking on a new chapter of sweet success!

Leading the New Trend of Gourmet Delights: The Role of Commercial Deli Display Refrigerator   In today's fast-paced world, consumers seek both deliciousness and convenience. For the foodservice industry, maintaining food freshness and taste while presenting it in an eye-catching manner has become crucial to enhancing customer experience and boosting sales. Here, commercial deli display cases stand out as invaluable partners for numerous foodservice establishments.   Guardians of Freshness Technology   Equipped with advanced cooling and temperature control technologies, commercial deli display cases provide the ideal storage environment for a wide range of cooked foods, cold dishes, pastries, and more. By precisely regulating the temperature and humidity within, they effectively inhibit bacterial growth, extending the shelf life of food while preserving its original flavor and nutritional value. This scientific approach to preservation not only reassures customers but also earns businesses a reputation for quality and repeat visits.   Masters of Visual Merchandising   Designed with both aesthetics and practicality in mind, commercial deli display cases showcase food like exquisite window displays. The transparent glass doors or showcases illuminate colorful delicacies, from enticing braised meats to crystal-clear cold dishes and golden-brown pastries, igniting customers' appetites and purchasing desires. This direct visual presentation is a powerful tool for drawing customers into stores and driving sales.   Experts in Space Utilization   In the premium real estate of commercial spaces, commercial deli display chillers optimize space with compact yet efficient designs. Customizable to fit specific store needs, they can be placed in various locations, from the open kitchen of a large restaurant to a corner of a convenience store. Multi-level display designs maximize limited space, accommodating a diverse range of food options to satisfy customers' varied tastes.   Green Guardians of Energy Efficiency   Amidst growing environmental awareness, commercial deli display refrigerator prioritize performance while contributing to sustainability. Equipped with energy-efficient compressors and insulation materials, they significantly reduce energy consumption and minimize environmental impact. Some high-end models even feature intelligent temperature control systems that automatically adjust based on food types and external conditions, achieving precise control and further saving energy costs.   Conclusion   In this fiercely competitive foodservice market, commercial deli display fridge, with their superior preservation capabilities, stunning visual displays, efficient space utilization, and eco-friendly designs, have become vital tools for enhancing brand image, captivating customer attention, and driving sales growth. Choosing a deli display showcase tailored to your business needs is akin to equipping your culinary venture with wings, making delicious success within reach.    

A Guide to Purchasing Beverage Display Coolers: How to Choose the Best Showcase for Your Needs     In the fiercely competitive beverage market, a high-quality beverage display cooler is not only crucial for enhancing the image of your store but also a vital tool for boosting sales and attracting customers. However, with the myriad of display cooler options available in the market, selecting one that meets your specific needs while offering excellent value for money can be challenging. Here's a comprehensive guide to help you make an informed decision when purchasing a beverage display cooler. I. Define Your Needs and Budget Needs Analysis: Start by identifying your display needs. Consider factors such as the size of your store, its layout, the types of beverages you primarily sell (e.g., carbonated drinks, juices, mineral water), and your target customer demographic. These factors will directly influence the specifications, capacity, and style of the display cooler you choose.   Budget Planning: Based on your needs, establish a realistic budget. The price of display coolers varies depending on brand, material, and functionality. Therefore, it's essential to set a budget range that aligns with your financial situation and long-term business plan. II. Focus on Material and Durability Exterior Materials: Common materials for beverage display cooler exteriors include stainless steel, glass, and plastic. Stainless steel is sturdy, easy to clean, and durable. Glass offers high transparency, allowing for an eye-catching display of beverages, but requires careful handling to prevent scratches. Plastic is cost-effective but may not be as durable.   Internal Structure: Examine the stability of the shelves, brackets, and other internal components to ensure they can withstand the weight of stacked beverages. Look for adjustable shelves that can accommodate different-sized beverages. III. Temperature Control and Preservation Temperature Control System: A premium beverage display cooler should have a precise temperature control system that maintains a consistent low-temperature environment, ensuring the quality and taste of beverages. Research the temperature range, cooling efficiency, and energy consumption of the cooler to select an energy-efficient model.   Preservation Features: Some advanced display coolers offer additional preservation features like dehumidification and antibacterial functions, which can further extend the shelf life of beverages. While these features may increase costs, they're worth considering for stores that need to display and store beverages for extended periods. IV. Intelligence and Convenience Smart Capabilities: With technological advancements, beverage display coolers are increasingly incorporating smart features like intelligent temperature control, remote monitoring, and fault alerts. Evaluate your needs and choose a cooler with appropriate smart functions to enhance management efficiency and customer experience.   Ease of Operation: Consider the door opening mechanism, accessibility for restocking, and the ease of cleaning and maintenance. Opt for a display cooler that is user-friendly and requires minimal effort to maintain. V. Brand and After-Sales Service Brand Reputation: Choosing a reputable brand for your beverage display cooler ensures quality, performance, and comprehensive after-sales service. Research the brand's market reputation, history, and customer reviews to make an informed decision.   After-Sales Service: Excellent after-sales service is a testament to a brand's commitment. Understand the warranty period, availability of repair service centers, and response time to ensure timely assistance in case of any issues. Conclusion In conclusion, purchasing a beverage display cooler involves a thorough consideration of various factors, including needs and budget, material and durability, temperature control and preservation, intelligence and convenience, as well as brand and after-sales service. By carefully comparing and weighing these aspects, you can find the perfect showcase for your beverages, adding immense momentum to your store's sales.  

Cake Display Chiller Buying Guide          As a star among desserts, the beauty and freshness of cakes are crucial to attracting customers. The cake display fridge, as an important tool for showcasing these delicious treats, requires careful selection. The following guide will detail the key points to consider when purchasing a cake display cabinet, helping you choose the most suitable one.   Product details information:   https://www.commercialdisplayfreezer.com/sale-45574522-led-black-white-glass-dessert-cake-display-freezer-with-danfoss-compressor.html Size and Capacity Consider Store Space: First, select a cake display refrigerator with an appropriate size based on the actual area and layout of your store. A chiller that is too large will make the store appear cramped, while one that is too small will not be able to fully showcase the products.   Estimate Display Quantity: Estimate the capacity needed for the display case based on the number of cakes sold daily. Ensure that the display cooler has enough space to accommodate all the cakes for sale.     Material and Appearance   Material Selection: Quality stainless steel or glass materials are preferred. Stainless steel is corrosion-resistant and easy to clean, while glass allows a direct view of the cakes, attracting customers.   Exterior Design: The exterior design of the display chiller should coordinate with the overall style of the store, while also considering its practicality, such as door opening methods and observation window designs. Performance and Functions   Cooling Effect: The cooling effect of the cake display fridge directly affects the freshness and taste of the cakes. When purchasing, pay attention to its cooling method, temperature control accuracy, and other performance indicators.   Lighting System: A good lighting system can enhance the visual effect of the cakes. LED lights are a common choice due to their energy efficiency and long lifespan.   Humidity Control: Appropriate humidity can maintain the taste and appearance of cakes. When purchasing, consider whether the display refrigerator has a humidity control function.   Defrosting Function: An automatic defrosting function can reduce the trouble of manual maintenance, ensuring the long-term effectiveness of the display cooler.   Brand and After-sales Service   Brand Selection: Well-known brands usually have better product quality and after-sales service. When purchasing, you can give priority to products from renowned brands.   After-sales Service: Understand the after-sales service policy of the product, such as the warranty period and maintenance services. Ensure that you can receive timely and effective support during use.   Price and Cost-Effectiveness   Price Comparison: When purchasing, you can compare the prices of different brands and models of cake display cases, choosing one with a high cost-effectiveness ratio.   Avoiding Low-Price Traps: Although price is an important consideration, avoid overly pursuing low prices while neglecting product quality and after-sales service. Other Considerations   Energy Consumption: Pay attention to the energy consumption indicator of the product, choosing an energy-efficient model to reduce operating costs.   Environmental Protection: Purchase products that meet national environmental protection standards, contributing to environmental protection efforts.   Installation and Debugging: Ensure that the installation and debugging of the display fridge are handled by professionals to guarantee its normal operation and service life.        In conclusion, when purchasing a cake display chiller, it is necessary to comprehensively consider factors such as size and capacity, material and appearance, performance and functions, brand and after-sales service, price and cost-effectiveness. I hope this buying guide can provide useful references for your purchasing process.  

  The Function and Selection Guide for Ice Cream Display Cases   With the arrival of hot summer days, ice cream has become one of the best options for people to cool down. As an essential tool for ice cream sales, ice cream display cases not only provide a visual treat for consumers but also ensure the quality of the preserved ice cream. This article will introduce the role and selection method of ice cream display cases to help you choose a suitable one.   Product information:   https://www.commercialdisplayfreezer.com/sale-2127087-dessert-station-stainless-steel-ice-cream-dipping-display-freezer-16-tanks.html     I. The Role of Ice Cream Display Cases Product Display: Ice cream display cases, with transparent glass doors or open designs, can clearly showcase various flavors of ice cream, attracting consumers' attention and stimulating their purchase desire.   Preservation Function: The internal refrigeration system of the display case maintains a constant low-temperature environment, effectively extending the shelf life of ice cream and ensuring its freshness.   Energy Efficiency: Modern ice cream display cases often utilize efficient compressors and refrigeration technology, reducing energy consumption and operating costs.   Aesthetic Decoration: With diverse designs, ice cream display cases can be chosen based on the store's interior decor to enhance the overall image of the store.   II. Selection Method for Ice Cream Display Cases Determine Your Needs: Before purchasing an ice cream display case, it is essential to clarify your needs, such as the size, capacity, and refrigeration method of the case. Choose a display case that suits your store's actual situation. Consider Quality: Quality is the key to selecting an ice cream display case. Choose a well-known brand and reliable product to ensure the stability and durability of the display case. Refrigeration Effect: The refrigeration effect is an important indicator to measure the performance of an ice cream display case. Choose a case with fast cooling speed and accurate temperature control to ensure the preservation quality of ice cream.   Energy Consumption and Noise: During the selection process, pay attention to the energy consumption and noise level of the display case. Choose an energy-efficient and low-noise case to reduce operating costs and improve customer satisfaction.   After-sales Service: Quality after-sales service is an essential guarantee for purchasing an ice cream display case. Choose a brand with a comprehensive after-sales service system to ensure timely resolution of any issues during use. Design and Appearance: Besides functionality and performance, the design and appearance of the display case are also factors to consider. A stylish and attractive display case can enhance the overall atmosphere of the store and attract more customers.   Price Factor: Price is also a crucial factor to consider during the selection process. Based on your budget and actual needs, choose a cost-effective product. Avoid blindly pursuing low prices while ignoring product quality and after-sales service. III. Conclusion     Ice cream display cases play a vital role in ice cream sales. Choosing a suitable display case can not only enhance the store's image but also ensure the preservation quality of ice cream. During the selection process, consider factors such as the role, quality, refrigeration effect, energy consumption and noise, after-sales service, design and appearance, as well as price, to find the perfect ice cream display case for your store.      

The Function and Purchase Guide of Supermarket Multi deck Open Chiller     I. The Function of Supermarket Open Display Chiller   Supermarket open fridge play an indispensable role in modern retail businesses. Below, we will explore the main functions of these display chiller in detail. Excellent Preservation Effect Supermarket multideck open chiller utilize advanced refrigeration technology to maintain a stable internal temperature, effectively extending the shelf life of fruits, vegetables, meats, and other food items. This ensures freshness, reduces loss for businesses, and improves operational efficiency. Enhanced Merchandise Display Supermarket air curtain display coolers feature an open design that clearly showcases products, allowing customers to have a clear overview. Additionally, the lighting system in the display cases also enhances the attractiveness of the merchandise, increasing customer purchasing intentions. Elevated Store Image The appearance design and material selection of supermarket display chiller are meticulously crafted to blend with the overall store decor, enhancing the store's image and level. Environmental Protection and Energy Saving With increasing environmental awareness, supermarket open chiller are becoming more environmentally friendly and energy-efficient. Many display cases now employ energy-saving technologies such as intelligent temperature control and efficient cooling to reduce energy consumption and lower operational costs for businesses.     II. Purchase Guide for Supermarket Air Curtain Display Cases   When purchasing multideck open chiler, we need to consider the following factors: Size and Capacity Firstly, we need to choose an appropriate size and capacity for the air curtain display showcase based on the store's size and storage needs. Smaller stores can opt for smaller display chiller, while larger storage requirements necessitate larger capacity display cases. Refrigeration Performance Refrigeration performance is a crucial indicator for air curtain display cases. We should select display refrigerator with fast cooling speed, precise temperature control, and stable operation. Additionally, it is important to understand the difference between air-cooled and direct-cooled systems to select the appropriate type based on our needs. Energy Efficiency Rating Higher energy efficiency ratings indicate lower energy consumption, resulting in significant savings on electricity bills over time. Therefore, we should pay attention to the energy efficiency rating of the open chiller and select products with higher ratings. Material and Quality The material and quality of the air curtain display case directly affect its durability and safety. We should choose commercial open chiller made from sturdy materials and reliable quality to ensure stability and safety. After-sales Service After-sales service is also a factor to consider when purchasing supermarket display fridge. We should select brands with comprehensive after-sales service systems to ensure prompt resolution of any issues that may arise during use. Noise Level The noise level of the supermarket fridge is another aspect to consider. We should choose products with lower noise levels to avoid disturbing customers and employees. Additional Features Some multideck open refrigerator also come with additional features such as defrosting and lighting. We can select these features based on our specific needs.   In conclusion, supermarket open chiller play a vital role in modern retail businesses. When making a purchase, we should comprehensively consider factors such as size and capacity, refrigeration performance, energy efficiency rating, material and quality, after-sales service, noise level, and additional features to select the most suitable air curtain display foods chiller for our needs.      

Supermarket Combination Island Freezer: Advantages Analysis and Selection Guide   With the rapid development of modern retail industry, supermarket shelf design is also constantly innovating and advancing. Among them, the combination island cabinet has become a new favorite in supermarket shelves due to its unique design and powerful functions. This article will provide you with a detailed analysis of the advantages of supermarket combination island freezers and a shopping guide to help you easily choose the right combination island freezer.     The advantages of supermarket combination island freezers   High space utilization: The combination island cabinet adopts a modular design, which can be flexibly combined according to the actual space size of the supermarket, achieving maximum space utilization. Whether it is a large supermarket or a small convenience store, suitable combination island cabinet layout solutions can be found.   Good product display effect: Combination island freezers usually have multiple display surfaces, which can display multiple products and increase the exposure rate of the products. Meanwhile, through reasonable display layout and lighting design, the characteristics and advantages of the product can be highlighted, attracting the attention of customers. Product information:   https://www.commercialdisplayfreezer.com/sale-44336831-r290-refrigerant-coated-steel-island-freezer-with-1040l-capacity-and-aluminum-interior.html Excellent shopping experience: The design of the combination island cabinet emphasizes humanization, making it convenient for customers to pick up and place goods. Customers can purchase the desired products within an area without having to wander around the supermarket, improving shopping efficiency. At the same time, the combination island cabinet can also provide customers with a comfortable shopping environment, allowing them to enjoy a pleasant experience during the shopping process.   Strong adaptability: The combination island cabinet can be flexibly adjusted according to the supermarket's business strategy and changes in product types. Whether it's adding new products, adjusting prices, or conducting promotional activities, they can all be achieved by changing the display content and layout of the combination island cabinet.   Beautiful and generous: Combination island freezers usually adopt a modern and minimalist design style, with a beautiful and generous appearance that can coordinate with the overall decoration style of the supermarket. Meanwhile, by combining different colors and materials, different shopping atmospheres can also be created.   The selection method of supermarket combination island freezers     ①　Clear requirements: Before purchasing a combination island cabinet, it is important to first clarify your own needs. Including factors such as the size of the supermarket's space, product types, and business strategies, in order to select suitable combination island freezers.   ②　Market investigation: Understand the brands and models of combination island freezers in the market, compare the advantages, disadvantages, and price differences of different products. Relevant information can be obtained through online searches, participation in exhibitions, and other means.   ③　Field investigation: When selecting a combination island cabinet, it is best to conduct a field investigation. Observe the appearance quality, structural stability, load-bearing capacity, and other aspects of the product to ensure the selection of products with reliable quality.   ④　Pay attention to details: When choosing a combination island cabinet, it is also necessary to pay attention to some details. For example, whether the shelves are adjustable, easy to clean, and have anti slip designs. These details will directly affect the effectiveness and safety of the product.   ⑤　Choose a brand with good service: When choosing a combination island cabinet, in addition to focusing on product quality, it is also necessary to choose a brand with good service. High quality after-sales service can ensure timely resolution of problems encountered during use, improving the shopping experience.     In short, supermarket combination island freezers have become an indispensable part of modern supermarkets due to their unique advantages and powerful functions. When choosing a combination island cabinet, it is necessary to clarify one's own needs, examine the market, pay attention to details, and choose a brand with good service in order to comprehensively consider and purchase a suitable combination island cabinet.    

Maintenance methods for red wine cooler   A wine cabinet serves as an essential tool for wine enthusiasts to preserve their prized collections. Its maintenance and care directly impact the quality and shelf life of the wine. This article will provide you with detailed wine cabinet maintenance knowledge to help you better preserve and enjoy your wine collection.   Product detailed information: https://www.commercialdisplayfreezer.com/sale-43685647-fashion-dual-zone-ss-double-glass-door-red-wine-cooler-with-180l-68-bottles.html   I. Daily Cleaning   Regular cleaning: It is recommended to thoroughly clean the wine cabinet once a month. Use a soft, dry cloth to wipe the exterior surface, avoiding the use of chemical-based cleaners that may damage the cabinet.   Interior cleaning: Regularly remove dust and debris from inside the wine cabinet to ensure good ventilation. Additionally, check and clean the condenser of dust to improve cooling efficiency.   II. Temperature and Humidity Control   Temperature settings: Set the appropriate temperature based on the wine's storage requirements. Generally, red wines should be stored at a temperature between 12-18°C, while white wines require a slightly lower temperature. Ensure the temperature fluctuation in the wine cabinet is minimal to maintain the wine's quality.   Humidity adjustment: Maintaining the right humidity is also crucial for wine preservation. The humidity in the wine cabinet should be kept between 50%-70%. Excessively low humidity can lead to drying and cracking of the cork, affecting its sealing ability, while excessive humidity can promote mold growth. Therefore, regularly check and adjust the humidity inside the wine cabinet.   III. Placement and Arrangement   Placement location: Place the wine cabinet in a well-ventilated area, avoiding direct sunlight. Ensure there is sufficient space beneath the cabinet for heat dissipation.   Arrangement method: Store the wine bottles upright to ensure the cork remains in contact with the wine, maintaining its moisture. Avoid placing bottles near the vents or heat sources to prevent excessive temperature fluctuations.   IV. Regular Inspection and Maintenance   Check the sealing: Regularly inspect the wine cabinet's sealing to ensure the door closes tightly, preventing external air from entering. Replace the sealing strip if necessary.   Check the cooling system: Regularly inspect the wine cabinet's cooling system to ensure it operates normally. If there are unusual noises or reduced cooling efficiency, contact a professional for inspection and repair.   Clean the drainage holes: Ensure the wine cabinet's drainage holes remain unblocked to prevent water accumulation and internal dampness. Regularly clean the drainage holes and surrounding areas.   V. Precautions   Avoid frequent opening and closing: Minimize the number of times you open and close the wine cabinet to reduce energy consumption and extend its lifespan.   Avoid overfilling: Ensure the wine cabinet's storage capacity is not exceeded to maintain good ventilation and heat dissipation.   Follow the instructions: Follow the wine cabinet's user manual for operation and maintenance to ensure its proper functioning and longevity.   In conclusion, proper wine cabinet maintenance is crucial for preserving and enjoying your wine collection. By regularly cleaning, controlling temperature and humidity, arranging bottles correctly, conducting regular inspections and maintenance, and adhering to the necessary precautions, you can ensure your wine collection remains fresh and enjoyable over time.    

How to Choose a Wine Cooler: Perfectly Preserve Your Collection of Fine Wines     Wine, as an elegant and culturally rich beverage, not only represents taste but also embodies the passage of time. For wine enthusiasts, properly storing wine is a required skill. A wine cooler, as the "guardian" of wine, plays a crucial role in its selection. This article will provide you with a science-based guide on how to choose a suitable wine cooler to perfectly preserve your collection of fine wines.   https://www.commercialdisplayfreezer.com/sale-44282988-air-cooling-bodega-red-white-wine-cooler-with-steel-wooden-shelves.html   Understanding the Types of Wine Coolers Compressor Wine Coolers: These work by utilizing a compressor and condenser, offering fast cooling speeds and precise temperature control. They are suitable for storing all types of wine, especially high-end wines that require long-term storage. Semiconductor Wine Coolers: They achieve cooling through semiconductor components, requiring no compressor and producing low noise. However, their cooling effect is relatively weaker. They are suitable for short-term storage or wine display. Determining the Capacity of the Wine Cooler The capacity of the wine cooler should be determined based on your current wine collection and future plans. If you are a wine enthusiast with a rich collection, a larger capacity wine cooler is recommended. If you only enjoy wine occasionally, a small wine cooler will suffice. Focusing on Temperature Control The ideal storage temperature for wine is between 12-18°C, with 15°C being the optimal temperature. Therefore, temperature control is crucial in a wine cooler. A quality wine cooler should have a precise temperature control system to maintain a stable storage temperature, avoiding any fluctuation that may affect the quality of the wine. Considering Humidity Control Humidity is also important in wine storage, generally requiring a humidity level between 50%-70%. Too low humidity can cause the cork of the wine bottle to dry out, affecting its sealing ability. Excessive humidity can lead to mold growth. Therefore, a wine cooler should have humidity control functions to ensure the humidity of the wine storage environment is moderate. Observing the Shockproof Design Wine should be kept away from vibration during storage as it can accelerate the oxidation process and affect the taste. Therefore, a wine cooler should have a good shockproof design to reduce the impact of external vibrations on the wine. Paying Attention to the Material and Appearance The material and appearance of the wine cooler are also factors to consider. Quality wine coolers are usually made of environmentally friendly materials with a smooth surface finish that is easy to clean. Additionally, the wine cooler's design should be simple and elegant, complementing your home's style.   Considering Energy Consumption and Noise Level When selecting a wine cooler, you should also pay attention to its energy consumption and noise level. Quality wine coolers often have energy-saving designs that can ensure performance while reducing energy consumption. Simultaneously, the noise level of the wine cooler should be kept at a low level to avoid disturbing your home environment. Understanding the After-sales Service When purchasing a wine cooler, understanding the after-sales service policy is equally important. Choosing a brand and merchant with a comprehensive after-sales service system can ensure that you receive timely and effective solutions when encountering problems during use.   In conclusion, choosing a suitable wine cooler requires consideration of multiple factors. Only by selecting a wine cooler with stable performance, comprehensive functions, and an elegant appearance can you perfectly preserve your collection of fine wines. I hope this article has provided you with valuable insights on the selection techniques of wine coolers and will help you safeguard your wine collection.  

How to repair and clean the condenser   The condenser is one of the components used in commercial refrigerators. If it is used for a long time, it may cause certain damage or there is too much dust inside that needs to be cleaned. So how should we clean it?   First of all, what everyone can think of is definitely dismantling and cleaning. That's right, the first cleaning method we choose is to dismantle the tightening parts on the outer sleeve of the condenser. However, during the dismantling process, we must be careful not to damage some small parts. Next, we can use a nozzle for flushing.   If you feel that you may damage the condenser during the process of removing the external structure, you can also choose a water gun for direct flushing. However, during the high-pressure water gun flushing process, you must remove the front mesh, otherwise direct flushing may damage the condenser due to excessive pressure,   During the preparation process, we need to prepare a cloth and brush to simply scrub the surface of the condenser, which also prevents dust from being directly sprayed into the interior of the components during the flushing process with a high-pressure water gun.   The most important thing is to adjust the pressure and intensity during the assembly of the water gun, and rinse it from top to bottom, which will also clean it more thoroughly.         Guangdong Green&health Intelligence Cold Chain Technology Co., Ltd is a professional manufacturer with more than 15 years experience in the R&D of commercial refrigeration equipment. Covering an area of 50,000 square meters , and the registered capital is 10 million RMB, now there are more than 300 employees including 50 senior technical managerial personnel. Green&Health is dedicated to be the most influential and professional intelligent cold chain production base in southern China!    

Common problems with cold storage     1.Installation environment and maintenance issues of air coolers. The location and environment of the air cooler inside the cold storage will affect its operation. Generally, the air cooler near the cold storage door is prone to condensation and frost. Although the air cooler can automatically heat and defrost at regular intervals, if the door is opened too frequently, the opening time is too long, and the hot air flow enters for a long time and in large quantities, the defrosting effect of the fan will be poor. Because the defrosting time of the air cooler cannot be too long, otherwise the cooling time will be relatively shortened, the cooling effect will be poor, and the storage temperature cannot be guaranteed.     2.The drainage problem of melted water during defrosting of the air cooler. This issue is related to the severity of frost formation. Due to severe frost formation in the fan, a large amount of condensate water will inevitably be generated. The fan's water collection tray cannot withstand it, and the drainage is not smooth, which will leak out and flow to the ground inside the warehouse. If there are stored goods below, they will soak the goods. In this case, thicker guide pipes can be installed to remove condensate. Some air coolers have the problem of blowing water from the fan and spraying it onto the inventory in the warehouse. This is also a problem of fan frost formation in hot and cold exchange environments, mainly due to the condensation water generated by the fan blades in the hot environment, rather than the defrosting effect of the fan itself.     3.The issue with the condenser fan motor and the heating pipes of the cooling fan. This is a vulnerable component. Fan motors that run for a long time in high temperature environments may malfunction and be damaged. If ensuring temperature in the cold storage is crucial, it is necessary to order some vulnerable parts for timely repair.     4.Cold storage temperature and cold storage door issues. The size of a cold storage room, the amount of inventory, the number of doors opened, the time and frequency of opening and closing doors, the frequency of inventory entry and exit, and the throughput of goods are all factors that affect the temperature inside the warehouse. The design and construction of cold storage, as well as the setting and quantity of cold storage doors, must be comprehensively arranged based on inventory levels and the frequency of door opening and closing. Cold storage units should also use cold storage in a reasonable manner according to design specifications, and cannot ignore design conditions and the actual condition of facilities, blindly increasing inventory and improving goods turnover, exceeding the normal load and bearing capacity of facilities and equipment. Otherwise, many problems will arise.     5.Fire safety issues in cold storage. Cold storage is generally around minus 20 degrees Celsius, and due to the low ambient temperature, it is not suitable to install fire sprinkler systems. Therefore, more attention should be paid to fire prevention in cold storage. Although the ambient temperature of a cold storage is low, if a fire occurs, there may be combustible materials in the warehouse, especially inventory that is often packaged in cardboard and wooden boxes, which can easily ignite. Therefore, the fire hazard of cold storage is also very high, and smoking and fire must be strictly prohibited in cold storage. At the same time, the air cooler and its electrical box, power cord, and electric heating tube should also be regularly inspected to eliminate electrical fire hazards.     6.The environmental temperature issue of the condenser. The condenser is generally installed on the roof of outdoor buildings. In high summer temperatures, the temperature of the condenser itself is very high, which increases the operating pressure of the unit. If there are many hot weather conditions, a cooling shed can be added on the roof condensation to block sunlight and lower the temperature of the condenser, in order to reduce machine pressure, protect unit equipment, and ensure the temperature of the cold storage. Of course, if the unit's capacity is sufficient to ensure the temperature of the warehouse, it is also possible not to build a cooling shed.     7.The problem of low compressor efficiency. Due to long-term operation of the compressor, the cylinder liner and piston rings and other components are severely worn, resulting in increased clearance and a corresponding decrease in sealing performance. As a result, the gas transmission coefficient of the compressor also decreases, leading to a decrease in refrigeration capacity. The refrigeration capacity of the compressor can be roughly determined by observing its suction and discharge pressures. If the refrigeration capacity of the compressor decreases, the common method is to replace the cylinder liner and piston rings of the compressor.     8.There is a problem of excessive air or refrigeration oil in the evaporator of the cold storage. Once a large amount of refrigeration oil is attached to the inner surface of the heat transfer tube of a cold storage evaporator, its heat transfer coefficient will decrease. Similarly, if there is more air in the heat transfer tube, the heat transfer area of the evaporator will decrease, and its heat transfer efficiency will also significantly decrease, slowing down the rate of temperature drop in the warehouse. Therefore, in daily operation and maintenance, attention should be paid to timely cleaning the oil stains on the inner surface of the evaporator heat transfer tube and discharging the air inside the evaporator.     9.Improper adjustment or blockage of the throttle valve in the cold storage, as well as problems with excessive or insufficient refrigerant flow. When the throttle valve is opened too large, the refrigerant flow rate is too high, and the evaporation pressure and temperature also increase, and the rate of temperature decrease in the warehouse will slow down; At the same time, when the throttle valve is opened too small or blocked, the refrigerant flow rate also decreases, the cooling capacity of the system also decreases, and the rate of temperature drop in the warehouse will also slow down.   Generally, the refrigerant flow rate of the throttle valve can be determined by observing the evaporation pressure, evaporation temperature, and frost formation in the suction pipe.   Blockage is an important factor affecting refrigerant flow, and the main causes of throttle valve blockage are ice blockage and dirt blockage. Ice blockage is caused by the poor drying effect of the dryer, as the refrigerant contains water. When passing through the throttle valve, the temperature drops below 0 ℃, and the water in the refrigerant freezes into ice, blocking the throttle valve hole. Dirty blockage is caused by the accumulation of a large amount of dirt on the inlet filter screen of the throttle valve, which hinders the flow of refrigerant and leads to blockage.

Precautions for installation and use of cold storage     1. The refrigeration compressor unit is not equipped with vibration damping or has poor vibration damping effect. According to the installation specifications, the overall vibration reduction device of the unit should be installed. If the vibration reduction is not standardized or there are no vibration reduction measures, it will cause severe machine vibration, which is easy to cause pipeline cracking, equipment damage, and even machine room damage.     2. The refrigerant pipeline lacks or lacks a return bend. When the pipeline for transporting refrigerant turns from horizontal to upward, it must be made into a small U-shaped bend that first hangs downwards and then upwards. Only when the pipeline goes upwards can it be qualified. It cannot be directly turned upwards at a 90 degree angle. Otherwise, the oil in the system cannot return well to the compressor, and a large amount of sediment will accumulate in the cold air fan, making the fan and the entire system unable to function properly, and even damaging the fan and unit equipment.     3. The refrigerant pipeline connection is uneven. When the unit pipeline is connected to a group of multiple compressors, in order to evenly distribute the return oil to each compressor, the main pipeline interface must be set in the middle position of the multiple machine heads, and then some branch pipelines should be set on both sides to allow the return oil to flow evenly into multiple compressor branch pipelines. Moreover, valves should be installed on each branch pipe to regulate the return oil volume.     4. The pipeline is not insulated. If there is no insulation material, the cold pipeline will frost at the ambient temperature, which will affect the refrigeration effect, increase the unit load, and then cause the unit to operate at an excessive intensity, reducing the unit's service life.     5. Regularly check various technical indicators and make timely adjustments. The operating temperature and pressure of the system, as well as the amount of lubricating oil and refrigerant, should be checked and adjusted in a timely manner. The system should have automatic control and compressor alarm devices. Once there is a problem, it will issue an alarm prompt or automatically shut down the compressor for protection.     6. Maintenance and upkeep of the unit. Regularly replace the lubricating oil and filter. Add refrigerant as needed. The condensor should be cleaned at all times and kept clean to avoid dust, mud, or flying debris that may affect the refrigeration effect. Lubricating oil may have undergone changes in its performance after operating at high temperatures for a long time in the system, and may no longer be able to provide the necessary lubrication. Filters should also be replaced regularly.   More Cold room information click here:   https://www.commercialdisplayfreezer.com/sale-12081516-customized-easy-assemble-cold-storage-room-for-meat-auto-defrost-type.html        

Eight major causes of motor burnout in refrigeration compressors As the core power source of the air conditioning system, the normal operation of the air conditioning compressor plays a decisive role in the efficiency and lifespan of the entire air conditioning system. However, in practical use, the burning problem of air conditioning compressors is quite common, and the reasons are diverse and complex. The following is a detailed explanation of the eight main causes of air conditioning compressor burnout:   1. Frequent starting of air conditioning compressor: Although a step-down starting circuit design is used, the initial current of the air conditioning compressor will still exceed the rated value by several times, causing the motor temperature to rise rapidly. If the temperature setting of the air conditioner is unreasonable, such as too low refrigeration or too high heating, it will cause the compressor to start and stop frequently, greatly reducing its service life.   2. Unstable power supply voltage: When the quality of the power supply is poor and the voltage is too high or too low, it will have a negative impact on the air conditioning compressor motor. Especially when the operating voltage exceeds the rated range of the compressor, motors that are in an inefficient and overheated state for a long time are prone to a decrease in insulation performance, and the windings may be burned out due to overheating; In addition, three-phase voltage or current imbalance can also increase motor losses (iron and copper losses), causing the compressor motor coil temperature to be too high. Failure of overheat protection may lead to motor insulation burnout, ultimately causing coil short circuit burnout.   3. Insufficient cleanliness of the air conditioning copper pipe system: If the system contains moisture, it will lead to a decrease in the insulation performance of the compression motor. After experiencing high and low temperature cycling changes, water, refrigerant, and refrigeration oil will produce acidic substances, which will corrode the insulation layer of the motor. Under long-term operation, there is a risk of the air conditioning compressor motor being burned out.   4. The rotating parts of the air conditioning compressor are stuck: Once the rotating parts are stuck, if the motor protection device fails to operate effectively, the compressor motor may burn out due to overload.   5. Incomplete cleaning of refrigeration system: For air conditioning refrigeration systems that have experienced compressor burnout faults before, it is necessary to thoroughly clean them before replacing with new compressors. If strong acidic substances generated during the burning process of the original compressor remain in the system, these acidic residues will corrode the insulation layer of the new compressor motor after the operation of the new compressor, leading to further burning.   6. Insufficient cooling of the air conditioning compressor: Improper control of overheated return air in the air conditioning system results in high return air temperature or low return air volume, making it impossible for the compressor motor coil to receive effective cooling. This situation is more common in air-cooled heat pump units, and high return air temperature can also lead to high exhaust temperature, causing a series of compressor problems.   7. Manufacturing process defects of air conditioning compressors: If the motor burns out shortly after the air conditioner is used, there may be process quality issues during the compressor manufacturing process.   8. Fault in the starting contactor of the air conditioning compressor: The starting contactor is an important component to ensure the safe and stable start of the air conditioning compressor. When its contact resistance is too high or sintered, it may cause a short circuit of the motor, which can lead to motor burnout; In addition, poor circuit contact may also cause excessive starting current, which can easily ignite and burn out the air conditioning compressor due to the instantaneous strong current impact. Therefore, ensuring the good condition of the starting contactor and its related circuits is crucial for preventing compressor burnout.    

What are the reasons for poor refrigeration performance of refrigeration units?   1. Refrigerant leakage 【 Fault Analysis 】 After refrigerant leakage in the system, the cooling capacity is insufficient, the suction and exhaust pressures are low, and the intermittent "squeaking" airflow sound can be heard at the expansion valve, which is much larger than usual. The evaporator does not have frost or a small amount of floating frost. If the expansion valve hole is enlarged, the suction pressure still does not change significantly. After shutdown, the equilibrium pressure in the system is generally lower than the saturation pressure corresponding to the same ambient temperature. 【 Solution 】 After refrigerant leakage, do not rush to fill the system with refrigerant. Instead, immediately identify the leakage point and repair it before filling with refrigerant.   2. Excessive refrigerant filling after maintenance 【 Fault Analysis 】 If the amount of refrigerant filled in the repaired refrigeration system exceeds the capacity of the system, the refrigerant will occupy a certain volume of the condenser, reduce the heat dissipation area, and reduce its refrigeration efficiency. The suction and exhaust pressures are generally higher than the normal pressure values, the evaporator will not frost properly, and the cooling in the warehouse will be slow. 【 Solution 】 According to the operating procedure, it is necessary to shut down for a few minutes before releasing excess refrigerant at the high-pressure shut-off valve. At this time, residual air in the system can also be released together.   3. There is air in the refrigeration system 【 Fault Analysis 】 Air in the refrigeration system will reduce the refrigeration efficiency. The prominent phenomenon is that the suction and exhaust pressures increase (but the exhaust pressure has not exceeded the rated value), and the temperature from the compressor outlet to the condenser inlet increases significantly. Due to the presence of air in the system, the exhaust pressure and temperature both increase. 【 Solution 】 After a few minutes of shutdown, air can be continuously released from the high-pressure shut-off valve several times, and some refrigerant can be filled appropriately according to the actual situation.   4. Low compressor efficiency 【 Fault Analysis 】 Low efficiency of refrigeration compressors refers to the decrease in actual exhaust volume, resulting in a responsive decrease in refrigeration capacity, under constant operating conditions. This phenomenon often occurs on compressors that have been used for a long time, with large wear, large clearances between various components, and a decrease in the sealing performance of the air valve, resulting in a decrease in actual displacement. 【 Solution 】 Check if the cylinder head paper gasket has been punctured and caused leakage; Check if the high and low pressure exhaust valve plates are not tightly closed; Check the fit clearance between the piston and cylinder   5. Excessive frost on the surface of the evaporator 【 Fault Analysis 】 Long term use of cold storage evaporators should be defrosted at regular intervals. If not defrosted, the frost layer on the evaporator pipeline will accumulate thicker and thicker. When the entire pipeline is wrapped in a transparent ice layer, it will seriously affect heat transfer, causing the temperature inside the warehouse to not drop within the required range. 【 Solution 】 Stop defrosting, open the warehouse door to allow air circulation, or use fans or other devices to accelerate circulation and reduce defrosting time.   6. There is refrigerant oil in the evaporator pipeline Fault analysis: During the refrigeration cycle, some refrigerant oil remains in the evaporator pipeline. After a long period of use, when there is a lot of residual oil in the evaporator, it will seriously affect its heat transfer effect and cause poor refrigeration. 【 Solution 】 Remove the refrigerant oil from the evaporator. Remove the evaporator, blow it clean, and then dry it. Not easy to disassemble, it can be compressed from the evaporator inlet and then dried with a spray lamp.   7. The refrigeration system is not smooth 【 Fault Analysis 】 Due to poor cleaning of the refrigeration system, after several periods of use, dirt gradually accumulates in the filter, and some mesh holes are blocked, resulting in a decrease in refrigerant flow rate and affecting the refrigeration effect. The filter screen at the expansion valve and compressor suction port in the system also shows slight blockage. 【 Solution 】 The micro blocking component can be removed, cleaned, dried, and then reinstalled.   8. Filter blockage Fault analysis: The desiccant has been used for a long time and forms a paste to seal the filter, or dirt gradually accumulates inside the filter, causing blockage. 【 Solution 】 Remove the filter, clean and dry it, replace it with a new desiccant, and install it into the system.   9. Refrigerant leakage inside the expansion valve temperature sensing package 【 Fault Analysis 】 After the leakage of the temperature sensing agent in the expansion valve temperature sensing package, the two forces below the membrane push the membrane upwards, causing the valve hole to close and the refrigerant in the system to not pass through, resulting in non cooling. At this time, the expansion valve does not frost, the low pressure is vacuum, and no airflow sound can be heard in the evaporator. 【 Solution 】 Stop the machine and close the shut-off valve. Remove the expansion valve to check if the filter is blocked. If not, use a nozzle to blow the inlet of the expansion valve to see if it is ventilated. It can also be visually inspected or disassembled for inspection, and replaced if damaged.   10. The cooling effect of air-cooled condensers in cold storage is poor Fault Analysis ① The fan is not turned on. ② The fan motor is damaged. ③ Fan reverse direction. ④ The ambient temperature is high (above 40 ℃). ⑤ The cooling fins of the condenser are blocked by oil and dust, preventing air circulation. 【 Solution 】 Use a steel wire brush to remove surface dust, or clean it.   11. The cooling effect of water-cooled condensers in cold storage is poor Fault Analysis ① Cooling water valve not opened or opened too small, inlet water pressure too low ② The water volume control valve is malfunctioning. ③ The scale on the condenser tube wall is relatively thick. 【 Solution 】 Check the cooling water volume. Remove scale.   12. There is residual air in the system [Fault Analysis] There is air circulation in the system, which can cause high exhaust pressure, high exhaust temperature, hot exhaust pipes, poor cooling effect, compressor running for a short time, and exhaust pressure exceeding normal values. [Solution] Stop the machine and release air at the exhaust valve hole.   13. Shutdown caused by low suction pressure Fault analysis: When the suction pressure in the system is lower than the set value of the pressure relay, its contacts will act and cut off the power supply. 【 Solution 】 1. Refrigerant leakage. 2. The system is blocked.   14. Temperature controller out of control Fault analysis: The temperature controller fails to adjust or the temperature sensing package is improperly installed. 【 Solution 】 Remove the temperature controller to inspect its contacts and adjust the position of the temperature sensing bulb

We sincerely invite you to attend the 2024 Canton Fair !   Dear sir / madam:         Hello! Thank you for your long-standing support and attention to the Green&Health Refrigeration Equipmemnt.   Our company will participate in the Canton Fair from April 15th to 19th, and we look forward to your visit.   Address: Pazhou Convention and Exhibition Center,No.382 Yuejiang West Road,Haizhu District, Guangzhou   Booth number: 18.2L10 Phase one  

Reasons for heating up when using cake display fridge     It is common for many merchants to have some doubts about the working principle of newly purchased cake display cabinets when using them. The most common question is: Is it normal for the cake display cabinet compressor to blow out hot air? So today the editor will talk to you about some of the reasons why the cake display cabinet heats up.   https://www.commercialdisplayfreezer.com/sale-12432740-r404a-refrigerant-bread-cake-display-freezer-size-1800-730-1500mm.html   1. The cake display chiller is cooled by a compressor, and the heat is discharged from the radiator during refrigerant circulation. Therefore, a slight heating of the bread display cabinet is a normal phenomenon.   2. The cake display cooler condenser is the radiator of the display cabinet. If the condenser is blocked by debris, it will cause the temperature of the cake display cabinet to not be released, resulting in abnormal heat generation.   3. If the environmental temperature of the cake display cabinet is high, it will be unfavorable for heat dissipation, and poor heat dissipation will cause the display cabinet to heat up. If the refrigerator is placed in a closed space with poor air flow, it can also accumulate heat.   4. Reasonable space should be reserved around the cake display cabinet, and the placement principle of "no top touching, no wall behind" should be followed.   Under normal circumstances, a slight heating of the cake display cabinet is a normal phenomenon. As long as attention is paid to the above issues during use and proper maintenance can prolong its service life. Green&health Refrigeration Equipment Company provides various products such as freezers, cold storage, refrigerated display cabinets, vertical display chiller, supermarket island freezer, ice cream display freezers,meat freezer and multideck open chiller.     Cake Display Showcase   The cake display showcase made of artificial marble, steel, SS and tempered glass. It is usually for cake/donut/dessert displaying under low temperature. Digital controller for easy operation, featuring clear digital display. Each cake showcase has at least two glass layers inside. ( Standard one is two layers, extral more layers is possible) Power supply is 220V / 50Hz-60Hz, it can be widely used all over the world. The rear sliding door is made of tight rubber to prevent cold air leakage.            

Tips for displaying fruits in a Multi Deck Open Chiller     When placing fruits in the fruit open chiller, it is necessary to distinguish and handle them according to the actual situation of the site, environment, season, etc. For example, it can be divided into the best taste area and the most nutritious area; Elderly and children's areas; Current season zone and off-season zone; This week's sales champion area and the most affordable selling price area, etc. Therefore, the following principles can be followed:     (1) Freshness principle   Before displaying fruits in the sales area, quality inspection must be carried out to ensure that all fruits on the shelves meet the standards of excellent quality, reflecting the "freshness" principle of fruit management. Once rotten or spoiled fruits are found, they should be picked out as soon as possible to avoid affecting sales.   (2) The principle of abundant goods   The fruit display on the fruit display open fridge should be sufficient. At first glance, there seems to be a lot of goods, which can better attract customers to come into the store to make purchases. Resolutely prevent out of stock and shortage, and ensure high-quality and affordable goods.   (3) Color matching principles   Properly combining and displaying various brightly colored fruits can fully reflect the abundance and variability of fruits. The skill of fruit display lies in not only providing customers with a pleasing and constantly changing freshness, but also promoting the displayed fruits effectively. For example, combining purple grapes, red apples, golden oranges, and green pears can create a colorful effect.     (4) Principle of reducing spoilage   When displaying fruits, it is necessary to consider the characteristics of different fruits. For example, it is necessary to choose the correct props, methods, and display temperature, otherwise improper display may cause deterioration. Peaches are sensitive to pressure and tend to heat up easily, so they should not be stacked during display; Apples have a ripening effect on fruits such as bananas and kiwifruit, and putting them together can easily cause other fruits to spoil faster.   The display area of fruits must be appropriately proportional to the turnover volume. If the proportion is too large, the fruit will have a longer shelf life. If the proportion is too small, the daily replenishment frequency will be frequent. Also pay attention to the lifespan that this fruit can maintain under the current temperature and humidity.     (5) First in, first out principle   If the same product is purchased in several batches at different time periods, the principle of first in, first out is to determine which batch of products to display and sell first. It is crucial to adhere to the principle that fruits have a short turnover period and a fast spoilage time.   (6) Seasonal principle   The management of fruits has a strong seasonality, and corresponding fruits are available for sale in different seasons. Therefore, the display of fruits should change with the times, and newly launched varieties should be displayed in obvious places to better meet the new needs of customers.   (7) Clean and hygienic principles   The fruit products displayed after cleaning are good in appearance and easier to sell. Whether the display area, equipment, and utensils used for display are clean and hygienic also affects customer purchasing desire. Therefore, all areas within the fruit shop should be kept clean and tidy.     Please click here to know more product information:   https://www.commercialdisplayfreezer.com/sale-43280207-customized-supermarket-bottle-air-cooler-multideck-open-chiller-with-plug-in-system.html Multideck Open Chiller from Green&Health Temperature range 2~8 degree, using intelligent temperature control system. The use of advanced air duct structure, faster cooling,and temperature uniformity. With night energy-saving cover specifically for the night and other non-business hours use. The refrigeration system and electrical control parts are brand-name products, to ensure the reliable running. Standard 4 shelves with 5 display spaces, and the height of the shelves can be freely adjusted, making better use of storage space.  

About the holiday notice !   The annual Spring Festival is approaching.   The specific matters regarding our company's holiday are as follows:   February 1st to February 17th, 2024 is our holiday period, totaling 17 days.   Employees officially start work on February 18th.       https://www.commercialdisplayfreezer.com/

Freezer faults can be checked by themselves in several aspects In the use of freezers in daily life there are many problems that enable us to check for ourselves. Here are five examples:   First, when the freezer is completely cold 1. Ensure that the power plug is not pulled out or loosened. 2. Verify that the switching power supply is disconnected 3. Ensure that the fuse of the main power switch is turned off. Green&Health Island Freezer Auto defrost by hot copper https://www.commercialdisplayfreezer.com/supplier-43304-supermarket-island-freezer Second. When the freezer is not cold enough 1. Check if there are any extra ingredients in the cabinet 2. Check whether there is a continuous high temperature object or the number of doors is too repeated. 3. Check the sun exposure or sit near the heater. Third, whether there is an abnormal sound in the freezer 1. Keep the refrigerator stable. 2. Make sure the back of the freezer touches the wall. 3. Check for dirt between the freezer and the walls. 4. Cold room capillaries, air conditioning copper pipe loose Fourth, if the outside of the refrigerator sweat, in rainy or continuous high temperature, the condensate outside the refrigerator is a routine condition. Fifth, when the water is injected into the cold room, the sound of the refrigerant flowing through the air conditioning copper pipe is very conventional. https://www.commercialdisplayfreezer.com/sale-11591651-high-efficiency-static-cooling-supermarket-island-freezer-for-meat-seafood.html   Green&Health Island Freezer 1.famous brand compressor,R290 environment-protection refrigerant 2. ElitechTemperature Control 3. Glass door direction: up and down. Sliding LOW-E tempered glass lids 4. Customized 220V/50HZ,110v/60HZ 5. Corrosion-resistant prepainted steel plate 6. Built-in energy saving LED lamp 7. Auto defrost by hot copper 8. Elegant anti-collision for protection 9. Display scheme: Flexible combination according to demand. 10. Color optional: white / black / gray... 11. Using famous compressor, dual-compressor for fast freezing. 12· Large glass window, so that goods at a glance. 13· Universal caster wheel, convenient to move. 14· Aluminum alloy corners are firm and durable. 15· Flat-bottom structure or huge capacitydesign. 16· Air cooling condenser.   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. www.commercialdisplayfreezer.com

The purchase of fresh meat cabinet needs to pay attention to several performance indicators 1. Fresh meat cabinet outsourcing design: When buying, the first thing we want is the appearance, especially in the supermarket, the appearance of luxury and beautiful fresh meat cabinet is of course more favored by customers, but we should pay more attention to its quality, of course, we hope to use it for a long time, so quality is its very important performance indicator. Green&Health Fresh meat showcase refrigerator https://www.commercialdisplayfreezer.com/supplier-4167858-meat-display-freezer   2. High-quality fresh meat freezers often use high-quality anti-collision profiles, no deformation, and corrosion, durable and can stand the test of time, environmental factors, fluoride-free has been the general trend of the industry, the energy efficiency index of the product, the degree of fluoridation, the degree of noise are all new indicators for consumers to examine fresh meat freezers. 3. Refrigeration performance of fresh meat freezer: this is mainly reflected in the refrigeration temperature and refrigeration speed, the working temperature of high-quality vertical fresh meat freezer is differentiated by the most suitable temperature for food storage or preservation, and the use of step temperature design, partition insurance system can ensure that the juice contained in the food is not lower than the freezing point and maintain its fresh state. 4. High quality fresh meat freezer Freezer temperature is about -2 degrees, high quality fresh meat freezer also through the use of special-shaped evaporation tube and matching with the appropriate refrigeration capacity of the unit, so that high quality fresh meat freezer refrigeration faster. To ensure the health and safety of the stored food is also guaranteed. https://www.commercialdisplayfreezer.com/sale-38040063-customize-supermarket-refrigerated-meat-case-cooler-with-led-lamp.html Fresh Meat Showcase from Green&Health 1.Air cooling without frost, fast and uniform cooling. 2.Microcomputer intelligent temperature control, simple and easy to operate. 3.LED energy-saving lamp tube, high brightness, low power consumption. 4.Frequency conversion technology, low noise, energy saving of nearly 30% during normal operation. 5.Excellent compressor:long life span,stable performance,low noise,faster cooling. 6.The inside cabinet use stainless steel,corrosion resistant,easy to clean,prevent the food polluted,keep food fresh. 7.Microporous wind uniform distribution,temperature stability inside,food is not easy to dry. 8.The large capacity design, making the store more food. 9.Coated steel inner, health, beautiful and clean.   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. www.commercialdisplayfreezer.com

What safety risks will exist if the freezer is used for a long time? Refrigerator is an essential equipment for supermarket refrigeration, but we all know that any product has a service life, refrigerator is no exception, more than a certain service life will continue to use will bring some security risks. What safety risks will exist if the freezer is used for a long time: 1, the refrigerator use period is too long, the line will inevitably gradually aging, the refrigerant is easy to leak, and then prone to leakage, natural and other dangerous conditions, the leakage of refrigerant will cause serious environmental pollution, and the aging of the line will cause short circuit and other phenomena, resulting in the refrigerator explosion and fire. Green&Health multideck open chiller https://www.commercialdisplayfreezer.com/supplier-43302-multideck-open-chiller   2, the refrigerator is used for a long time, the refrigeration effect will certainly become worse and worse, and the power consumption will increase, because the long-term use of the refrigerator refrigeration speed began to decline significantly, and once the refrigeration time is too long, it will lead to the refrigerator required to consume more electricity. 3, the tightness of the freezer will also become worse, mainly reflected in the tightness of the freezer. Just like the refrigerator at home, if the sealing of such products is not good, the refrigeration effect will be worse, and the poor sealing is easy to lead to the deterioration of food.   4, the noise of the compressor becomes louder, with the aging of the refrigerator, the compressor of the refrigerator will slowly age, which will lead to the working efficiency of the compressor becomes low, and the noise becomes louder and louder. Green health Air Cooling Upright Multideck Refrigerator. 1.Trendy designed appearance.Air cooling system. 2.Humanized design increases display effect of goods and makes it convenient for customers to pick goods during shopping. 3. Enlarged evaperator increases heat exchange frequency, which makes the temperature to be reduced much lower and more rapidly, and at the same time, to be more energy-saving. 4. European style wind curtain refrigerating cabinet, applying back blow structure 5. Electric energy is saved a lot by natural air defrosting. Night energy-saving curtain is equipted for night use and other non-business hours. 6.Components of the cooling system and control devices apply famous brand products from the whole world, in order to ensure stability and reliability of the cabinet. https://www.commercialdisplayfreezer.com/sale-11676282-supermarket-open-chiller-remote-compressor-air-cooling-upright-multideck-refrigerator.html   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. www.commercialdisplayfreezer.com    

Several suggestions for reducing refrigerator power consumption First, the placement's location: To maximize refrigerator operating efficiency, situate the appliance in a cool, well-ventilated area away from direct sunlight, the stove, and other heat sources. The condenser should be able to easily dissipate heat in such an environment. Relocate the refrigerator at least 10 centimeters away from the wall, leaving 30 centimeters of space on top and side to enhance heat dissipation and operational efficiency. The cooling effect of the refrigerator will be impacted by surface dust on the compressor and condenser, therefore clean the appliance frequently.   Green&Health showcase cooler use pure copper tube condenser and evaporator, good heat dissipation. www.commercialdisplayfreezer.com Second, to open and shut the door of the refrigerator: Refrigerator doors should be kept airtight, any damage to the seam seal should be fixed right away, and attempts should be made to limit how often and how little the non-essential refrigerator is opened. Regular defrosting of the non-frost refrigerator is also recommended to prevent power waste and any impact on the cooling effect. Third, how food is arranged: in general, food preservation works best around 8 to 10 degrees Celsius. Food shouldn't be packed too full or densely to prevent obstructing the cold airflow, which would prevent the refrigerator from refrigeration or from being overly loaded. Food and the box should be separated by more than 10 mm to allow for the flow of cold air inside and maintain a constant, even temperature while using less power. To prevent wasting electricity, hot food should be allowed to cool to room temperature before being placed in the refrigerator. When freezing food, it is recommended to use cold boiling water instead of hot, and to store it in the refrigerator overnight due to the low ambient temperature. It is recommended to gradually thaw frozen food before using it, as this can lower the freezer's temperature and use less electricity. www.commercialdisplayfreezer.com   Green&Health upright drink display chiller For every type of business or residence, our commercial beverage refrigerator is ideal. Characteristic: 1. Humanity and tasteful visual design. 2. Has a big capacity and can hold many goods. 3. A pure copper evaporator and condenser tube system. 4. High-efficiency compressor from the imported Danfoss/Embraco brand using R134a refrigerant. 5. Doors with self-closing mechanisms and double-glazed glass. 6. It has sturdy load-bearing shelves and five movable tiers; 7. It has a glass door with a heater and fan cooling with self-defrost; 8. Automatic water evaporation system, self-rebound door 9. Compressor brand: Secop. 10. An intelligent controller and an LED light that uses less energy are included. 11. It's ideal for all of your storage needs thanks to the thickened adjustable shelf.   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. www.commercialdisplayfreezer.com  

Is it possible to keep commercial freezers open 24 hours a day? Commercial freezers have computer temperature controller, this temperature controller mainly regulates the temperature in the cabinet, there are two common thermostat, one is more traditional mechanical, divided into several gear, each gear represents a temperature range; The other is microcomputer temperature control, you can set the temperature range, the temperature control is more accurate, no matter what kind of, it is to control the temperature in the refrigerator.   When the temperature in the refrigerator reaches the temperature controller range, the compressor will stop running, when the temperature rises to 5 degrees above the set range, the compressor will start, there is a temperature difference to protect the compressor. Therefore, the refrigerator is not 24 hours of continuous work, the middle will rest, if the door is not many times, the refrigerator insulation effect is good, the temperature in the refrigerator will rise slowly, so as to save electricity. So there is no need to worry that the refrigerator will burn the compressor when it is used for 24 hours. A lot of people will do this, even when it's time to close the store at night. Until the next day when the shop opened, I thought it would save electricity. In fact, this idea is wrong, this does not save electricity, but will increase the workload of the compressor, the compressor has to work to reach the set temperature, easy to cause compressor damage. The closure of the freezer will accelerate the loss of the compressor and affect the service life of the whole machine. If you do not use the refrigerator for a long time, such as several days, it is still good to shut down, otherwise there is no need to deliberately shut down, you can be in the power state for 24 hours.   https://www.commercialdisplayfreezer.com/sale-40558652-butchery-equipment-meat-display-cooler-r404a-deli-refrigerated-showcase.html   Deli Showcase from Green&Health 1. The cabinet is hygienic, clean, and simple to clean. 2. To assure the product's total energy consumption ratio, the cabinet's wind speed and air volume must be more uniform. A 40MM insulation layer also prevents the loss of cold and enhances cooling capacity. 3. Noise reduction at 45 dB. Fix the issue with the noisy machine.   4. The product exhibits excellent results thanks to new LED lighting, a 6500K white light display, and a space without dead angles. 5. The device can be used to store cooked food, meat products, plate food, and other food in supermarkets, marketplaces, and delicatessens.   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. www.commercialdisplayfreezer.com

Service life of supermarket fruit fresh-keeping cabinet Under normal circumstances, the use of 5-8 years of fruit fresh-keeping cabinet products purchased by manufacturers is no problem. If combined with proper use and maintenance, the working environment is not too bad, and 8-10 years of use is normal. Regular brand fruit fresh-keeping cabinet manufacturers, the compressor brands used are mostly high-quality compressors or imported compressors, the refrigeration pipe is pure copper pipe, the cabinet insulation layer is polyurethane high pressure foam, such fruit fresh-keeping cabinet refrigeration speed is fast, good thermal insulation performance. In this way, the overall refrigeration efficiency is high, energy saving, long service life.   To use fruit storage cabinets for long service life, the first thing to do is to choose a regular freezer manufacturer. Small workshops are irregular, although the appearance of fruit storage cabinets is not very different, but the use of low-cost mixing compressors, copper foil pipe cooling, insulation materials and even disassembled foam board. Although this type of refrigerator can also be refrigerated when in use, the refrigeration efficiency is very low, and the insulation performance is worse, resulting in uninterrupted work of the compressor. Over time, the compressor may burn out. For aluminum pipes, the first year is generally not a problem, after small-scale use, in winter, the second year of pipeline use has been basically corroded, it is easy to cause refrigerant leakage. This refrigerant leak caused by pipeline corrosion cannot be repaired and can only be scrapped. Therefore, the service life of inferior fruit is generally only 1-2 years, which is also the fundamental reason why you can't buy inferior fruit fresh-keeping cabinets. In the purchase and use, the correct use and maintenance of the fruit fresh-keeping cabinet can effectively extend the service life of the fruit fresh-keeping cabinet: If placing a fruit storage cabinet, place it in a dry and ventilated location. The temperature of the fruit preservation cabinet is much higher than that of the household refrigerator, so it needs to be placed in a higher position than the household refrigerator. The fruit crisper should not be near the wall, and the surrounding area should have 20 cm or more cooling space. After using the fruit fresh-keeping cabinet, pay special attention to keeping the refrigerator clean, especially the dust on the condenser of the external compressor, and clean it every three months. If there is too much dust, it is easy to shorten the service life. At night or when the passenger flow is low, pull the curtain as far as possible, which not only reduces energy consumption, but also shortens the working time of the compressor. For a long time, it is not necessary to open the machine every 20 days or so, so that the refrigerator can enter the working refrigeration state, otherwise it is easy to fail due to the aging of electrical components. Open Style Fruits Preservation Vegetable Display Chiller For Fruit Store https://www.commercialdisplayfreezer.com/sale-35517601-open-style-fruits-preservation-vegetable-display-chiller-for-fruit-store.html     Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. www.commercialdisplayfreezer.com  

How to deal with freezer bacteria? The main role of the refrigerator is to keep food cold and fresh, and many people usually use improper treatment to lead to the growth of bacteria inside the refrigerator, especially mold. Therefore, it is necessary to clear the internal stock regularly and dispose of expired food. To combat bacterial growth, we need to do the following. Green&Health Fresh meat showcase refrigerator https://www.commercialdisplayfreezer.com/supplier-4167858-meat-display-freezer     1. Clean and disinfect the refrigerator once a month, not to clean the local area, but to clean and disinfect the entire refrigerator. Before cleaning, unplug the power supply, remove the food inside, and then scrub with a clean towel. After scrubbing, open the cabinet door for ventilation.  2, usually the food should be classified, such as raw cooked food to be stored separately. Freezer upper temperature is the most stable, put leftovers, fast food, etc.   3, vegetables and fruits with plastic wrap, for the purchase of vegetables and fruits, we need to clean it first, and then wrap it with plastic wrap or plastic wrap, and then put it in the freezer, vegetables are generally stored for no more than three days.   4, eggs should be placed in a specific location, there is a special place in the refrigerator, and try to separate eggs from other foods, because the eggs themselves exist many pollutants. 5, the refrigerator should be regularly defrosted work, because the frost layer will lead to slow cooling effect, the required power consumption increases. https://www.commercialdisplayfreezer.com/sale-38040063-customize-supermarket-refrigerated-meat-case-cooler-with-led-lamp.html   Fresh Meat Showcase from Green&Health 1.Air cooling without frost, fast and uniform cooling. 2.Microcomputer intelligent temperature control, simple and easy to operate. 3.LED energy-saving lamp tube, high brightness, low power consumption. 4.Frequency conversion technology, low noise, energy saving of nearly 30% during normal operation. 5.Excellent compressor:long life span,stable performance,low noise,faster cooling. 6.The inside cabinet use stainless steel,corrosion resistant,easy to clean,prevent the food polluted,keep food fresh. 7.Microporous wind uniform distribution,temperature stability inside,food is not easy to dry. 8.The large capacity design, making the store more food. 9.Coated steel inner, health, beautiful and clean.   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. www.commercialdisplayfreezer.com  

How can the supermarket display refrigerator's lifespan be increased?     Fresh-keeping display cabinets are used by supermarkets to chill a wide variety of products, which can somewhat enhance profitability. Like other objects, a supermarket preservation display fridge has a set number of years left on its service life. In general, a high-quality supermarket preservation display chiller has a service life of around three to five years. In addition to its inherent quality, regular maintenance plays a role in determining how long a supermarket preservation display fridge lasts. The display cabinet's usable life can be increased with more cautious maintenance. Multideck open chiller information Click here: https://www.commercialdisplayfreezer.com/sale-2160363-right-angle-commercial-open-front-multi-deck-display-chiller-remote-system.html     So, how to extend the service life of the supermarket preservation display cabinet? What should you do? Here are some maintenance methods:   After the arrival of the new supermarket display cabinet, open the box and then check the random accessories in the cabinet. Check the supermarket preservation display chiller according to the factory packing list, whether the accessories except the cabinet are complete, and whether any accessories are omitted in the packing process. Don't use energy right away once the new store display fridge arrives. Make sure the grocery store display case is kept off the power source for at least thirty minutes or an hour.   Once the supermarket chiller has been used for a while, clean it with a soft cloth or sponge dipped in water or soap (never use a neutral, caustic cleaning solution). Then, wipe it clean with a dry towel. The decision on the time period should be based on how frequently the supermarket glass refrigerator is used. Wipe and clean once a month is ideal. Multi glass doors beverage display refrigerator Product information click here:https://www.commercialdisplayfreezer.com/sale-36572217-oem-upright-beverage-chiller-supermarket-display-drink-showcase.html   It is important to pay attention to the store display fridge's electricity line. Make use of a distinct, designated socket and a dependable, safe grounding wire.   Before installing the supermarket refrigerator, retailers must make sure the power supply complies with 220V/50 HZ standards. For safe operation, an automatic regulator with a capacity more than 1000W must be installed if the voltage surpasses the relevant norm.    

The use of fresh meat cabinet tips We usually go to the supermarket convenience store, the market on the purchase of fresh meat, will find fresh meat are placed in a refrigerated cabinet, this is why? In the end, the freezer is how to ensure the fresh quality of meat? Today I will tell you the reason. Green&Health Fresh meat showcase refrigerator https://www.commercialdisplayfreezer.com/supplier-4167858-meat-display-freezer   We are used to the meat we buy back into the freezer in the fresh layer, when we are a long time to save is placed in the freezer layer, so we are at home in the most common method of preserving meat, but the supermarket in the freezer and the home of the different, the use of natural methods are also different, and today to talk to you about how to ensure that fresh meat of the quality of fresh meat to ensure that the nutrients will not be Loss. 1, how to keep fresh meat in the supermarket freezer In fact, the supermarket method of meat preservation with our methods at home is basically the same, mainly through the fresh meat into the freezer fresh storage, fresh meat freezer to ensure that a fresh meat is the most appropriate temperature for fresh storage, to ensure the freshness of meat, in fact, is also the nutrients in the fresh meat with a low temperature will be locked to ensure that the quality of meat of fresh. 2, thawed fresh meat can not be put into the freezer refreezing. We thawed meat can not be put in the freezer in this freezer, because in this period, meat after high temperature freezing, meat will be susceptible to bacterial erosion, resulting in meat deterioration problems, affecting the consumption of meat. https://www.commercialdisplayfreezer.com/sale-38040063-customize-supermarket-refrigerated-meat-case-cooler-with-led-lamp.html   Fresh Meat Showcase from Green&Health 1.Air cooling without frost, fast and uniform cooling. 2.Microcomputer intelligent temperature control, simple and easy to operate. 3.LED energy-saving lamp tube, high brightness, low power consumption. 4.Frequency conversion technology, low noise, energy saving of nearly 30% during normal operation. 5.Excellent compressor:long life span,stable performance,low noise,faster cooling. 6.The inside cabinet use stainless steel,corrosion resistant,easy to clean,prevent the food polluted,keep food fresh. 7.Microporous wind uniform distribution,temperature stability inside,food is not easy to dry. 8.The large capacity design, making the store more food. 9.Coated steel inner, health, beautiful and clean.   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. www.commercialdisplayfreezer.com      

Selection of delicatessen cabinet should pay attention to the details As the rhythm of people's lives is becoming more and more compact, there are many people will choose to go directly to the supermarket to buy cooked food to eat, because it will save them the effort to go to cooking, improve the enthusiasm and efficiency of the work. So the use of delicatessen cabinet for the big supermarkets has become more and more common, then we should how to choose the delicatessen cabinet to give you some small suggestions. Green&Health Deli showcase refrigerator https://www.commercialdisplayfreezer.com/supplier-43303-deli-display-refrigerator   First, from the air-cooled, direct cooling to analyze Cooked food cabinet according to the cooling method to points, cooked food cabinet is generally divided into direct cooling, air-cooled two kinds. The advantages of air-cooled deli cabinet is cooling fast, uniform temperature inside the box, frozen space will not be frost, especially for frozen food, the disadvantage of its structure is complex, large power consumption; Direct cooling deli cabinet has the advantage of simple structure, power consumption, the disadvantage of slow cooling, deli cabinet box temperature is not uniform, frozen space has a frost layer. Second, careful study, be wary of counterfeit Can rest assured that boldly buy the products of major brands, has the energy-saving mark or with energy-saving label is better, but be wary of non-environmentally friendly deli cabinet fake environmental protection deli cabinet, non-energy-saving deli cabinet fake energy-saving deli cabinet, deli cabinet has not received the 3C certification is also in the market to sell and so on to deceive consumers. This is based on your own actual needs to choose the size of the deli cabinet reasonably. Cooked food cabinet: standard air-cooled deli cabinet, deluxe deli cabinet, T-type deli cabinet, front cover deli cabinet. Cooked food freezer evaporator selection, high temperature cooked food cabinet to choose the cooler for the evaporator, which is characterized by fast cooling speed, but easy to cause moisture loss of cold storage products; medium and low temperature cooked food freezer selection of seamless steel tube evaporator tube-based, which is characterized by a good effect of thermostat and can be cold storage in due course. https://www.commercialdisplayfreezer.com/sale-40558652-butchery-equipment-meat-display-cooler-r404a-deli-refrigerated-showcase.html   Deli Showcase from Green&Health 1. The cabinet is hygienic, clean, and simple to clean. 2. To assure the product's total energy consumption ratio, the cabinet's wind speed and air volume must be more uniform. A 40MM insulation layer also prevents the loss of cold and enhances cooling capacity. 3. Noise reduction at 45 dB. Fix the issue with the noisy machine.   4. The product exhibits excellent results thanks to new LED lighting, a 6500K white light display, and a space without dead angles. 5. The device can be used to store cooked food, meat products, plate food, and other food in supermarkets, marketplaces, and delicatessens.   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. www.commercialdisplayfreezer.com

How to deal with the freezer ice blocking phenomenon? There are a lot of freezers in the use of the process of frost and frost, this situation is due to the freezer ice blocking is now caused. Usually ice blocking failure is mainly due to the time we charge the refrigerant, the refrigeration system for vacuum drying treatment is not thorough enough, or the refrigerant itself contains too much water. When the freezer is in working condition, the freezer will start to freeze because of the residual moisture, you can hear the sound of refrigerant circulating water in the pipe. Green&Health Back Load Display Fridge / Freezer https://www.maoyt.com/test/commercialdisplayfreezer.com/sale-11647436-refrigerated-glass-door-display-chiller-walk-in-refrigerator-cold-room.html After a period of time, the water will slowly stay out of the refrigerant, thus causing the blockage of the capillary tube, so that the refrigerant is not able to circulate the flow, the loss of cooling capacity, when the flow of water stops, the temperature rises, the frost in the freezer room began to melt, which is known as frost, and then the cycle to repeat the above process. For this failure, we do not have to consciously seek master to repair, do-it-yourself solution. First of all, we must use a hot towel wrapped capillary tube outlet, so that the ice blockage quickly melted, and then the melted water pumped back to the compressor. After such treatment, the machine can temporarily resume work. If it still cannot work normally, the vacuum treatment method is used to dry it. The quality of the freezer itself is the key, but with the use of a long time, there will always be some small problems, in our daily life, we must pay attention to the use of the freezer when there are many places, usually do some maintenance work, can effectively extend the life of the freezer. https://www.maoyt.com/test/commercialdisplayfreezer.com/sale-12149663-glass-display-walk-in-chiller-with-ce-certification-for-hypermarket.html   Back Load Display Fridge / Freezer from Green&Health * Core Material: Polyurethane(PU) density 43kg/m3 or above * Surface Material: Color steel,galvanized steel,embossed aluminum,stainless steel * Door type: Swing(half-buried,all-buried door),manual sliding door,automatic sliding door,impact door,rolling up door,etc * Panel thickness: Thickness can be 50mm,75mm,100mm,120mm,150mm,200mm,according to different working temperature and outside condition of ambient temperature. * Environment friendly R404a refrigerant. Capacity can be small to 10cubic meter, big to 20cubic meter. * The temperature can be 0 to 10 °C for chilling storage, or -20°C to frozen storage. * Display and Storage can also meet your need Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products.https://www.commercialdisplayfreezer.com/

What is the reason for the freezer tripping?     We use the supermarket freezer, some people think that there will often be tripping, many people think that the freezer is bad, in fact, the first thing to consider is not the problem of the freezer itself, we need to look at it from two aspects: Green&Health multideck open chiller air-cooled, frost-free, fast and uniform cooling https://www.commercialdisplayfreezer.com/supplier-43302-multideck-open-chiller   1, too much electrical load The most common reason for freezer tripping is because of the voltage problem, freezer in the summer is to keep 24 hours a day are used, and this process we will certainly open the air conditioner, fans, such as voltage load of electrical equipment, due to the same operation, the voltage is in a main line, can not carry the voltage load will cause the tripping phenomenon. 2, supermarket freezer insulator leakage If the supermarket freezer use for a period of time after the tripping phenomenon, this situation is generally overload phenomenon, but there may also be insulator leakage phenomenon, how to determine it? First of all, when there is a trip, the leakage switch will be pushed up, if a few minutes can not be pushed up, indicating that it is overloaded, if it can be pushed up immediately, and the trip switch is not hot, then it is possible that the line insulator is reduced, or electrical insulator is reduced. In short, once the freezer appears to trip phenomenon, we first want to check whether it is due to the main line voltage in line with the problem, followed by checking whether the freezer is defective. https://www.commercialdisplayfreezer.com/sale-41083845-supermarket-multideck-open-chiller-with-doors-drink-display-fridge.html   Multideck open chiller from Green&Health Product description 1. The appearance of the display cabinet is novel and beautiful, and the design is integrated with the modern supermarket design concept, which is in line with the current trend of display cabinets. 2. The real double-layer air curtain, under the premise of reducing energy consumption, cools faster and the temperature is more uniform. 3. Four-layer adjustable shelves to meet a variety of display needs. 4. Built-in standard LED tube. 5. Copper tube evaporator. Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. https://www.commercialdisplayfreezer.com/

Reasons for the abnormal opening and stopping of the freezer In life, we will more or less contact with the freezer, the operation of the compressor in the freezer operation will bring some sound to the freezer, and when the compressor stops, generally does not make any sound. Refrigerator thermostat of different gear segments corresponding to different start-stop ratio, it will lead to the compressor issued by the sound of different lengths, but the compressor is not always not rest, when the compressor has been running non-stop, it is due to the compressor can not be normal due to automatic stop. And the reason why the compressor does not stop, probably due to the following reasons: Green&Health Island Freezer Auto defrost by hot copper https://www.commercialdisplayfreezer.com/supplier-43304-supermarket-island-freezer Refrigeration is poor, resulting in non-stop - refrigerator refrigeration effect when very poor, making has not been able to drop to the temperature required by the refrigerator, the compressor will naturally keep running, the refrigerator will be two non-stop. Causes of poor refrigeration refrigerator is mostly due to bad habits: open the door too many times, open the door for too long, placed too close to the wall, store too much food and so on. Refrigeration system failure - refrigeration system failure, such as system blockage, refrigerant leakage, bad pressure, etc., will lead to the compressor has not stopped, the freezer has been ringing non-stop. Control system failure - this type of failure is mostly due to the damage caused by the thermostat, thermostat damage will make the freezer even when the temperature drops does not stop running, resulting in freezer ringing non-stop. We can judge whether it belongs to this situation according to the cooling effect of the freezer, if so, just replace the thermostat. https://www.commercialdisplayfreezer.com/sale-11591651-high-efficiency-static-cooling-supermarket-island-freezer-for-meat-seafood.html   Green&Health Island Freezer 1.famous brand compressor,R290 environment-protection refrigerant 2. ElitechTemperature Control 3. Glass door direction: up and down. Sliding LOW-E tempered glass lids 4. Customized 220V/50HZ,110v/60HZ 5. Corrosion-resistant prepainted steel plate 6. Built-in energy saving LED lamp 7. Auto defrost by hot copper 8. Elegant anti-collision for protection 9. Display scheme: Flexible combination according to demand. 10. Color optional: white / black / gray... 11. Using famous compressor, dual-compressor for fast freezing. 12· Large glass window, so that goods at a glance. 13· Universal caster wheel, convenient to move. 14· Aluminum alloy corners are firm and durable. 15· Flat-bottom structure or huge capacitydesign. 16· Air cooling condenser.   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. www.commercialdisplayfreezer.com  

Refrigerator cooling effect of several important factors ​Refrigerator cooling effect of good and bad decision of the quality of food preservation, good quality refrigerator can provide us with fresh food to protect people's physical safety, poor quality refrigerator often leads to food expiration date, thus causing food poisoning and other adverse situations, so once we find that the cooling effect of the refrigerator problems, must be dealt with as soon as possible. Green&Health Cold Storage Room Materials : Polyurethane and metal sheet ; https://www.commercialdisplayfreezer.com/supplier-43309-cold-storage-room First of all, let's analyze the refrigerator cooling effect of several important factors: First, whether the power supply is normal: generally this kind of problem, the first check is the connection of the power supply, whether there is a problem, no matter what electrical appliances, the first to check the problem, to use a professional electric pen tool to check, do not bare hands; Second, whether the compressor is working properly: the compressor in normal operation will be a small motor vibration sound. If the compressor high-pressure output buffer tube fracture, or fixed this tube screws loose, resulting in high-pressure tube does not exhaust, low-pressure tube does not suction, so the compressor is running, but no refrigeration. Third, whether the refrigerant is used up: you can let the freezer run 3-5 minutes, cut off the power supply, listen to see if there is water flow sound. If there is no sound. It means that the refrigerant in the refrigeration system has run out or is leaking. It is also possible that the compressor has lost its ability to work. Fourth, the freezer capillary tube is blocked: freezer capillary tube blockage will cause the refrigerant can not enter the evaporator to absorb heat to play a role in the effect, resulting in the temperature of the freezer remains high. If the freezer belongs to the cold type does not cool the fault, you can check whether the fan of the freezer is normal operation: open the freezer freezer door, hold down the edge of the cabinet button to see whether the fan is working, the fan is not working will also cause the freezer does not cool. If we find through the above methods or can not repair the cooling effect of the freezer, you can only seek professional after-sales personnel to provide services, encounter the need to return to the factory to repair the situation, for the food stored in the freezer inside we need to transfer. https://www.maoyt.com/test/commercialdisplayfreezer.com/sale-12761708-customized-size-cold-room-chiller-for-food-storage-dynamic-cooling.html Cold Storage Room from Green&Health (1) Double faced color steel plates,double faced stainless steels and double faced embossed aluminum plates are used as the storage body materials so as to have a good heat insulating effect and high watm preserving performance. (2) The excellent brand cooling compressor units features high efficiency,energy saving,high reliability. (3) The storage uses highly efficient aluminum plate type heat exchanger,which has a relatively high heat exchanging rate. (4) The wholly automatic smart electronic controller has functions such as temperature setting,temperature control and automatic deforesting. (5) And it has many other characteristics such as multiple protections,overheat,overload,phase sequence,high-low pressures. (6) The cold storage size can be customized.   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. https://www.commercialdisplayfreezer.com/

Commercial freezer frost treatment With the improvement of people's living standards, people pay more attention to food, not fresh food generally do not go to buy food, whether it is transported and stored in a certain period of time, thus the emergence of the cold chain of transportation as well as commercial freezers. Food at low temperatures can be well preserved, people will be able to eat fresh food, it should be noted that the freezer will appear after a long time after the use of frost phenomenon, the general frost layer reaches 5mm thick when we need to deal with it. 1, the first commercial freezer thermostat knob rotary to the "coldest" gear, let the commercial freezer run for about 20 minutes, so that the commercial freezer food has a lower temperature, the box of food out, and then unplug the power cord. Green&Health Freezer Display Refrigerator -22~-18celsius. https://www.maoyt.com/test/commercialdisplayfreezer.com/supplier-43299-commercial-display-freezer   2, with some of the better heat transfer performance of the apparatus loaded with boiled water, such as metal lunch box, will be injected into the boiled water placed in the cabinet, wait about 30 minutes or so to replace the boiled water, and observe the cabinet frost parts off the status of how, until most of the frost off or melted only. Then use a clean dry towel to wipe the water stains around it. 3, for some of the more difficult frost position we can use hot towels for manual treatment, some people use a hair dryer, but it is not recommended that you use a hair dryer, because the temperature control of the hair dryer is not good, once the temperature is too high, it is easy to cause deformation inside the refrigerator. 4,The frost block on the wall of the freezer begins to fall off as a whole, and the cork shovel gently removes the remaining frost, and finally, wipe all around with a clean towel. In addition to artificial defrosting, commercial freezers can also be cleaned, which is conducive to extending the service life and health of commercial freezers. Freezer frost will make the temperature in the cabinet can not fall, greatly reducing the refrigeration performance advantage of the freezer, increase power consumption, resulting in the compressor working time continues to be longer, easy to cause damage. So once the frost situation is more serious, it must be dealt with in time. https://www.maoyt.com/test/commercialdisplayfreezer.com/sale-40549113-444l-hypermarket-free-standing-freezer-display-refrigerator-showcase.html Freezer Display Refrigerator from Green&Health   1. High efficiency American brand Copeland compressor with R404a refrigerant. 2.50mm polyurethane insulation. 3. Pure copper tube condenser and evaporator. 4. Tripple heated wire glass door without any fog. 5. Self-closing door,save a lot of energy, 6. First class fan motor,2000circle per minute, efficient in output the heated air and cold air in condenser and evaporator 7. Special design transformer,can fit in Spain voltage&frequency. 8. Temperature is -22~-18celsius. 9. Surrounded by double-insulating glass, keep transparent visual effect.   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products.https://www.commercialdisplayfreezer.com/

How to Ventilate a Coldroom After Installation? 　Cold storage is a device designed to keep items at specific temperature and humidity conditions. Ventilation treatment is very important when using cold storage. The main purpose of ventilation is to keep the air entering the cold storage fresh and dry. Green&Health Back Load Display Fridge / Freezer https://www.maoyt.com/test/commercialdisplayfreezer.com/sale-11647436-refrigerated-glass-door-display-chiller-walk-in-refrigerator-cold-room.html   　　1. It should be clear that the air inside the cold storage is also to be circulated. Ventilation can diffuse moisture, bacteria, and gases that absorb stale, musty odors stored in cold storage. Sometimes, proper ventilation can also make the cooling equipment work better. Therefore, the purpose of ventilation in cold storage is to let the air flow and remove excessive moisture and flavor. 2, the affordable space inside the cold storage should be limited to more than twenty-five square meters, which can make the ventilation more effective. Fresh air in the cold storage should be added regularly, and at the same time ensure the quality of the stored goods by removing excessive moisture. For the cold storage of the ventilation should be to ensure that fresh air to join at the same time, does not affect the cooling effect of the principle of proper operation of refrigeration equipment to ensure that the temperature continues to stabilize, reduce the economic losses caused by the increase in air temperature. 3, proper ventilation can help improve the efficiency of the cooling equipment. The cooling equipment of the cold storage will produce heat. Without proper ventilation, heat will accumulate inside, leading to a reduction in the efficiency of the equipment. Therefore, regular checking of the cooling equipment as well as opening the ventilation system can help improve the efficiency of the equipment, reduce energy consumption and save economic costs. 4, remember to clean the cold storage to ensure the effectiveness of ventilation. Be sure to keep the inside of the cold storage and equipment clean, and timely replacement of filters to ensure that the ventilation effect in the cold storage is guaranteed. Regularly cleaning and disinfecting surfaces, walls and floors can reduce mold and bacteria growth. Items that are hung or stored should be cleaned regularly to avoid excessive dust or trash buildup. Regular ventilation is very important in a cold storage facility. Proper ventilation keeps stored goods fresh and dry as well as effectively increasing the efficiency of the cooling equipment. If the equipment is checked and cleaned regularly, we can extend the service life of the equipment and improve the performance of the equipment to maximize the economic cost. Therefore, cold storage should be ventilated regularly in the process of use to ensure that the stored goods are fresh and dry, to ensure the effect of cooling equipment and to save economic costs. https://www.maoyt.com/test/commercialdisplayfreezer.com/sale-12149663-glass-display-walk-in-chiller-with-ce-certification-for-hypermarket.html   Back Load Display Fridge / Freezer from Green&Health * Core Material: Polyurethane(PU) density 43kg/m3 or above * Surface Material: Color steel,galvanized steel,embossed aluminum,stainless steel * Door type: Swing(half-buried,all-buried door),manual sliding door,automatic sliding door,impact door,rolling up door,etc * Panel thickness: Thickness can be 50mm,75mm,100mm,120mm,150mm,200mm,according to different working temperature and outside condition of ambient temperature. * Environment friendly R404a refrigerant. Capacity can be small to 10cubic meter, big to 20cubic meter. * The temperature can be 0 to 10 °C for chilling storage, or -20°C to frozen storage. * Display and Storage can also meet your need Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products.https://www.commercialdisplayfreezer.com/  

Three-door freezer cabinet door seal precautions_Convenience store freezer   Freezers and other multi-door coolers are used for a long time, we will find that the seal of the door may be aging and other problems, resulting in the sealing of the freezer is reduced, and the cold air leaks out. Thus increasing power consumption, affecting food refrigeration. For this phenomenon, there are a few precautions .   First of all, when we use a long time freezer and other multi-door freezers, the cabinet door seal has been aging should be replaced in a timely manner with a new seal. If the cabinet door seal deformation is slight, the surface is not straight, can be fixed magnetic door seal screws loosened, in the gap below the pad into the thin rubber, and then re-tighten the screws. If the door is closed and the box is not parallel, you can adjust the fixed box door bracket (or the upper and lower door frame pivot), as far as possible to adjust to the box door is closed and the box is parallel to the box. Green&Health Dazzle Black Chiller full screen display cabinet https://www.commercialdisplayfreezer.com/sale-12648618-1200l-commercial-display-freezer-five-layer-black-swing-glass-door-beer-refrigerator-2-to-10-degree.html    And because the freezer door seal has a certain magnetic force, the door seal is easy to adsorb iron shavings or ferrous alloy powder, so that the cabinet door closure is not strict, and will cause the door seal wear and tear, we found that this phenomenon should be used in a timely manner with a rag will be iron shavings and metal powder to wipe away. And when wiping the cabinet door seal edge of the residual water in the mouth, be careful to turn over the seal edge of the mouth, with a clean soft cloth gently wipe clean, do not break the cabinet door seal. When the freezer is not used for a long time, can be coated with a small amount of talcum powder on the door seal, keep it dry, and put it in a ventilated and cool place. So that the use of freezers and other multi-door freezers will be less prone to problems, and will not affect the refrigeration effect and the power consumption of the freezer because of problems with the freezer seals, which is very useful to us. https://www.commercialdisplayfreezer.com/sale-28656584-exquisite-appearance-commercial-bar-fridge-beer-cooler-freezer-chiller-for-pub.html   Commercial beverage refrigerator from Green&Health 1. This beverage refrigerator has a solid construction, plenty of capacity for storing drinks, and is appropriate for commercial and industrial use. 2. You won't have to worry about your drinks being too cold because it has fan cooling and self-defrost. 3. To avoid condensation and drips, the glass door also has a heater. 4. You don't need to bother about watering the refrigerator thanks to the self-evaporating water system. 5. When not in use, the refrigerator door is self-rebound to ensure that it remains closed. 6. Secop, a company renowned for its quality and dependability, built the compressor.   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. https://www.commercialdisplayfreezer.com/  

Notes on the first use of the freezer 1, about our handling of the freezer, if the tilt is more than 45°, must be static for more than 2 hours before you can start. No tilt can be turned on after 30 minutes of static, the location of the freezer should be in a well-ventilated place, away from the wall at least 10 centimeters away, so that the heat dissipation effect is better, to extend the life of the freezer. Avoid direct sunlight, the freezer must be placed flat. But still try to avoid freezers tilted more than 45° Green&Health Chest Deep Freezer Plug-and-Play design https://www.commercialdisplayfreezer.com/supplier-43312-chest-deep-freezer   2, on the freezer storage food, freezer in the storage of food before, need to run empty for a period of time, such as the temperature inside the freezer is reduced, and then put into the food, the storage of food should not be too much, try to avoid the electric freezer long time full load operation. And do not one-time full, such as two-door freezer is recommended to be placed in 4-5 times, placed drinks from top to bottom. 3, on the issue of power safety, freezers to use a special three-hole socket, separate wiring to install a grounding wire. Set the grounding wire, can not use the water and gas pipes to do grounding wire, not to mention telephone lines and lightning rods; and check whether the power supply voltage meets the requirements. https://www.commercialdisplayfreezer.com/sale-38137064-sliding-door-r134a-island-freezer-refrigerator-counter-display-case.html       Island freezer from Green&Health 1.The island freezer has compact structure, smooth lines and luxurious appearance. 2.It's lower energy comsuption compared with the traditional open island freezer with air cooling. 3.Plug-and-Play design, the store owner only need to provide power. 4. Varity combinations island freezer can be chosen flexibly, the store owners use it in flexible proportion according to the place. 5. Standard fixed with adjustable dip plastic basket, it can be adjusted towards left and right, planning the storage space optionally. 6. Overall foam with cyclopentane, high strength, high density, safe, power saving and beautiful. 7.The island freezer have Wide climate zone(ST) design, wide application scope.   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products.https://www.commercialdisplayfreezer.com/    

What is blast freezing?     Quick freezing cold storage: is the method of rapid freezing of food through its maximum ice crystal formation zone, when the average temperature reaches -18 ℃. Before we introduced the freezer, today we mainly introduce the quick-freezing storage.        Food in the freezing process will occur in a variety of changes, such as physical changes, cellular organization changes, and biological and microbiological changes. General temperature quick-freezing cold storage temperature is generally -15 ℃ ~ -35 ℃.     Green&Health Cold Storage Room Materials : Polyurethane and metal sheet ; https://www.commercialdisplayfreezer.com/supplier-43309-cold-storage-room       Quick-freezing storage, cold storage, fresh storage difference in the industry, according to the different products in the cold storage temperature requirements, generally divided into the following types of cold storage:       1, fresh storage: fresh storage library temperature is generally 0 ℃ ~ 5 ℃, mainly used for freshness, that is, in a longer period of time to maximize the original quality and freshness of agricultural products, agricultural products live body body as far as possible not to die, the cells in the process of cooling in a dormant state, reduce nutrient loss, to maintain the quality of freshness. This is generally applied to fruits and vegetables in this category. Now the fruit and vegetable industry, are centralized planting, in the process of transportation, sale, etc., it is inevitable to use the cold storage to maintain the nutrients of fruits and vegetables should be.         2, cold storage: cold storage temperature is generally -15 ℃ ~ -18 ℃. Generally irregular and gradual food into the cold storage, after a period of time, the temperature of cold storage to reach -18 ℃, pick-up is also irregular, irregular. There is no specific requirement for this "period of time", which is a typical cold storage. For example, meat, aquatic products are stored at a higher temperature requirements to maintain the internal class does not deteriorate. And in the sales process should not be taken out of storage, generally large supermarkets within the cold storage are refrigerated storage.     3, quick-freeze warehouse: quick-freeze warehouse temperature is generally in -35 ~ -40 ℃, for the rapid freezing of materials with low-temperature freezer warehouse temperature is generally in -18 ~ -20 ℃, for the quick-frozen materials after a long period of storage use. It is a variety of refrigeration equipment, that is, artificial refrigeration, so that the room to maintain a certain low temperature. Freezer compared to the freshness of the library, its role in the mechanism is very different, too low a temperature will cause food such as meat seafood cell tissue death, freshness will be greatly affected, so for the storage of fruits and vegetables and meat, not the lower the temperature the better.   https://www.commercialdisplayfreezer.com/sale-12941634-380v-walk-in-cold-storage-room-for-fish-meat-vegetable-20-20-degree-temperature.html Cold Storage Room from Green&Health 1. 50mm/75mm/100mm/120mm/150mm/200mm double side color steel plyurthane panel 2. inside hooks for easy assembling 3. three phase for above 30M3 room 4. sliding door or open door for optional with lock swift 5. American Emerson copeland compressor 6. environmental friendly R404a refrigerants 7. Dafoss valve 8. All size,temperature,projects customize   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products.https://www.commercialdisplayfreezer.com/

Refrigerator is not the more energy-saving the better? Refrigerator is not the more energy-saving the more energy-saving the better? A lot of customers who buy refrigerators are so thinking, then the fact is that this is the case?   Sure answer to tell you, of course, the more energy-saving the better. But to establish: to meet the functional requirements at the same time, the more energy-saving the better.   Green&Health Ice cream display freezer large capacity,Dynamic air cooling system https://www.commercialdisplayfreezer.com/supplier-43300-ice-cream-display-freezer   First of all, a low-power freezer, the power is small, then the cooling speed will drop, otherwise it will not meet the standard of low power consumption. General refrigeration is strong, fast are high-power compressor to meet these conditions. So low power consumption and strong refrigeration is a conflict.     And the freezer needs to reach a temperature below 0 degrees, if there is no high-power compressor is very difficult to realize. If we need to refrigerate or freeze the food, are required to quickly enter the low temperature environment, if for the sake of low energy consumption, then it will affect the quality of food, and then the loss is not worth it.     The basic function of the freezer is to extend the storage time of food. A good freezer should be energy-saving and cold storage coexist. So, we should pay more attention to the cooling effect while requiring low energy consumption. You can't influence the cooling effect to save energy.   So when you choose a freezer, you need to focus on energy saving and cooling effect can meet the needs of professional freezers. https://www.commercialdisplayfreezer.com/sale-12429725-curved-sliding-door-ice-cream-display-freezer-red-green-black-color.html   Ice cream display freezer from Green&Health 1) Imported famous compressor,Accurate refrigeration. 2) Fast Cooling Features 3) Digital temperature controller ensure better temperature control and saving energy 4) Fully spread air flow,Better refrigeration effect no pollution 5) The glass door is three layers hollow with heater no mist in humid weather,WIth Aluminum alloy frame   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. https://www.commercialdisplayfreezer.com/

How to extend the service life of commercial freezers? Any electrical appliances in use should be cared for in order to make their service life longer, more durable and long-lasting, commercial freezers are no exception.   Frequent cleaning of the condenser Generally every three months to clean the best, because the condenser surface is too dirty easily lead to the depth of refrigeration does not meet the requirements, resulting in a long boot time. This not only costs electricity but also affects the service life of the machine.   Green&Health Cake display freezer Fan cooling system,Back sliding door https://www.commercialdisplayfreezer.com/supplier-43301-cake-display-freezer     Compliance with voltage The power supply voltage should be in line with the rated voltage labeled on the freezer, and is required to work within its fluctuation range (generally small electrical appliances voltage in 198-242V, large equipment according to its power). Because the voltage is too low or too high is very easy to damage the compressor, thus causing unnecessary losses and affecting the service life of the machine.     Adjust the appropriate gear Mechanical temperature-controlled freezers, do not put the thermostat switch on the strong cold position (generally adjusted in 3 gears is good). Digital temperature-controlled freezers, do not set the temperature too low (generally set the refrigerated temperature of +5 degrees for the best, the freezing temperature is set to -18 degrees can be). Otherwise, the temperature is set too low, let the compressor work for a long time, not only cost electricity, but also affect the service life of the machine.     Pay attention to moving Moving the freezer should be gently put, when the master is not present, try not to let the freezer and the ground tilt more than 45 degrees. Make it not easy to corrode. So that it can be durable.   https://www.commercialdisplayfreezer.com/sale-12432144-curved-glass-cake-display-freezer-bakery-refrigerator-showcase-ce-rohs.html   Cake display freezer from Green&Health 1. Single curved line with article elegant marble base of the stable, the appearance of luxury and beauty; 2. Adopts famous brand compresso danfoss, fast and efficient cooling, quiet operation while saving; 3. Accurate digital control cabinet display ark temperature, with mild unique duct design, refrigeration more uniformity; 4. Flat shelves, smooth surface reflected the food's delicious, clear mission easy and convenient. 5. pure copper tube evaporator&condensor. 6. Back sliding door front open door optional. 7. All with Fan cooling system with fin evaporator and condenser.   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. https://www.commercialdisplayfreezer.com/

Commercial freezer noise solutions     The noise of convenience store freezer is generally caused by the noise of compressor and cooler, and the relatively closed environment will increase the noise decibel number when the freezer is working. We can avoid some wrong operation and wrong use habits to reduce the noise of the convenience store freezer on the degree of human impact. Green&Health Island Freezer Auto defrost by hot copper https://www.commercialdisplayfreezer.com/supplier-43304-supermarket-island-freezer     First of all, we must first find out why the sound of the freezer is getting louder and louder, or what causes the noise of the freezer to appear. In general, in the freezer when the initial start is most likely to happen, the initial start when the compressor workload is the largest, the noise is also the largest time. 1. Convenience store freezer top placed items. Freezer and its top placed items will resonate when the motor starts, thus emitting noise. Solution: remove the items on top of the cooler, so that it does not resonate, the noise is naturally eliminated.   2. There are small items falling into the back of the machine part of the convenience store cooler. The rear part of the machine part of the cooler (in the lower part of the back of the refrigerator) fell into the small things, such as bottle caps, lighters, small tools, etc., will also produce noise. Solution: Turn off the power of the refrigerator will fall into the machine inside the small items to remove the noise will disappear.   3. Convenience store freezer placement position is not flat. Convenience store freezer placed on the floor is not flat or placed unstable, is a common reason for the freezer noise. The solution: is to screw the bottom of the electric freezer adjustment screws, adjust the height, when the adjustment screws contact the ground, four feet contact the ground, that is the best condition. https://www.commercialdisplayfreezer.com/sale-11591651-high-efficiency-static-cooling-supermarket-island-freezer-for-meat-seafood.html   Green&Health Island Freezer 1.famous brand compressor,R290 environment-protection refrigerant 2. ElitechTemperature Control 3. Glass door direction: up and down. Sliding LOW-E tempered glass lids 4. Customized 220V/50HZ,110v/60HZ 5. Corrosion-resistant prepainted steel plate 6. Built-in energy saving LED lamp 7. Auto defrost by hot copper 8. Elegant anti-collision for protection 9. Display scheme: Flexible combination according to demand. 10. Color optional: white / black / gray... 11. Using famous compressor, dual-compressor for fast freezing. 12· Large glass window, so that goods at a glance. 13· Universal caster wheel, convenient to move. 14· Aluminum alloy corners are firm and durable. 15· Flat-bottom structure or huge capacitydesign. 16· Air cooling condenser.   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. www.commercialdisplayfreezer.com  

Fruit stores: why install air curtain cabinet?   Advantage 1: Sell high-grade fruit, improve the profitability of fruit   General seasonal fruit, are running volume, pull popularity, profit margin is limited. Want to further improve the profit margin, must be in the product and service, upgrade the grade. Then, imported fruit, gift fruit, good taste fruit, it is suitable for display in the wind curtain cabinet, such fruit, high prices, demand elasticity is small, correspondingly higher profit margins, but also to enhance the store's class, neat, refreshing sense. Green&Health multideck open chiller air-cooled, frost-free, fast and uniform cooling https://www.commercialdisplayfreezer.com/supplier-43302-multideck-open-chiller   Advantage 2: Extend the shelf life and freshness of fruit and reduce the loss   Fruits are living organisms before and after picking, and their internal metabolic activities led by respiration are carried out. After picking, fruits undergo aerobic respiration, which consumes the fruit organism. The higher the ambient temperature, the stronger the fruit respiration, the faster the consumption, the earlier the ripening, the shorter the storage time.   Appropriate refrigeration temperature, the fruit storage is very important, one is able to greatly inhibit the fruit respiration, slow down the rate of fruit metabolism, extend the fruit storage period and freshness (sales shelf life); second is to maintain the fruit's original color and shine brightness, taste fresh, fruit quality firm. The refrigeration temperature and humidity of common fruits are as follows:     Fruits Refrigeration temperature Humidity Storage period Apple -1℃～+1℃ 85%～90% 2-7 days Pear -1℃～+1.5℃ 85%～90% 1-6 days Watermelon 2℃～4℃ 5%～85% 7-10 days Cherry 0.5℃～1℃ 80% 7-21 days Coconut -4.5℃～-3℃ 75% 8-12 days Grapes -1℃～3℃ 85%～90% 1-4 days Strawberry -0.5℃～1.5℃ 75%～85% 7-10 days Orange 0℃～1℃ 80%～90% 50-70 days Pineapple 4℃～12℃ 85%～90% 14-20 days     https://www.commercialdisplayfreezer.com/sale-26719368-2000l-multideck-open-chiller-for-vegetable-supermarket-display-showcase.html   Multideck open chiller from Green&Health 01. Air-cooled, frost-free, fast and uniform cooling 02. Brand compressor, low noise, stable operation 03. LED energy saving lamp, high brightness, low power consumption 04. Transparent curtain, dust and insect proof, more energy saving 05. High transparency hollow glass, heat insulation lock cold, high-definition display of goods 06. Large space, goods display and storage of fresh both 07. Thickened adjustable shelves 08. Microcomputer intelligent temperature control, simple and easy to operate     Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. https://www.commercialdisplayfreezer.com/  

Some tips on refrigerator power saving   First, the location of placement:        Refrigerator should be placed in a cool and ventilated place, avoid direct sunlight or near the stove and other heat sources, the environment in which good ventilation, condenser easy to dissipate heat, to improve the refrigerator operating efficiency. Refrigerator back from the wall at least 10 cm, top and side to maintain 30 cm of space, in order to improve the heat dissipation effect and operating efficiency. At the same time to often keep the refrigerator clean, because the condenser and compressor surface dust will affect the cooling effect.      Green&Health showcase cooler use pure copper tube condenser and evaporator, good heat dissipation.          www.commercialdisplayfreezer.com   Second, to open and close the refrigerator door:     Refrigerator door should be kept airtight, door seam seal damage should be repaired immediately, try to reduce the refrigerator non-essential open the door times and open time, non-frost refrigerator should also be regularly defrosted, regularly to the condenser dust, so as not to affect the cooling effect, waste of electricity.   Third, the placement of food:     General food preservation effect in 8 to 10 degrees Celsius is good, the food placed in the refrigerator should not be too full too dense, so as not to block the flow of cold air, causing the refrigerator does not refrigeration or load too heavy.       Food and the box should be left between more than 10 mm gap, conducive to the flow of cold air in the box, so that the box temperature uniform and stable, reduce power consumption. Hot food should wait for its cooling to room temperature before putting into the refrigerator, can effectively avoid wasting electricity. Making frozen food should use cold boiling water, avoid using hot boiling water, it is best to put in the refrigerator at night, because the night ambient temperature is low. Frozen food ready to eat should be slowly melted in the freezer in advance, which can reduce the temperature of the freezer and save electricity consumption.   www.commercialdisplayfreezer.com   Upright drinks display chiller from Green&Health Our commercial beverage refrigerator is perfect for any business or home. Feature: 1. Humanity and elegant appearance design. 2. With large capacity, can storage more products. 3. Pure copper tube condenser and evaporator. 4. High efficiency imported brand Danfoss/Embraco compressor with R134a refrigerant. 5. Self-closing door, and double glazing glass door. 6. With strong load-bearing shelves, and 5 layers can be adjustable; 7. It features fan cooling with self defrost, glass door with heater, no drops, 8. Self evaporated water system, self rebound door, 9. Brand compressor: Secop. 10. It comes with an energy-saving LED light and intelligence controller. 11. Plus, the thickening adjustable shelf makes it perfect for all your storage needs.   Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products. www.commercialdisplayfreezer.com

A freezer at the right temperature in summer   Summer freezer freezing is generally -18℃. For frozen food, the lower the freezing temperature, the better the quality of food will be maintained, however, we also have to consider the economy, the lower the freezing temperature, the greater the power consumption, the higher the requirements for freezing equipment, for most frozen food, minus 18℃ is the most economic freezing temperature after a variety of trade-offs.   Precautions for freezer placement: 1. Put it away from heat source and away from direct sunlight. Because of the need for heat exchange with the outside world when working, it radiates heat to the outside world through the condenser.   2, Put in the place of low humidity, because the refrigerator, freezer shell, condenser and compressor are metal materials, if the air humidity is too large, will make these parts rust, shorten the service life of the refrigerator. At the same time, the humid and overheated environment will cause condensation on the surface of the refrigerator and affect the performance of electrical appliances.   3, put in a well-ventilated place, if the freezer around the debris, or too close to the wall, is not conducive to heat dissipation will affect the refrigeration effect. The top surface of the freezer should be left at least 30CM high space, and the back and two sides should be left at least 10CM space for heat dissipation.   4. Place on a flat, solid ground, and keep the compressor level. This is not only necessary for safety, but also allows the compressor to work smoothly and reduce vibration and noise.  

What kind of harm does not need to cause cold cabinets for a long time?  What do you need to pay attention to when you use it again?     1. The hidden dangers that may cause after long -term suspension may cause the lubricating oil in the compressor to sink the bottom and stick to the bottom, and the working components in the machine are in a dry state. At this time, if it is not treated and uses it blindly, the piston of the compressor will work without lubrication, which will affect the service life of the compressor, causing economic losses.     2. How to start long -term suspension Therefore, when the cold cabinet that is discontinued in winter is restored to use, it is best to put the cold cabinet in a room with a high room temperature, plug in the power supply to stop the compressor slightly, and then unplug the power plug. After a while (usually 5 ~ 10 is 5 ~ 10 Sim) then insert the power supply. After repeating 2 to 3 times in this way, the lubricating oil in the compressor can spray the motion components, so that they can get enough lubrication, and then make the cold cabinet officially enter the normal working stage. In this way, the compressor cylinder and other motor pieces can be avoided due to the absence of oil deficiency, and it can also make the cold cabinet enter the normal working state smoothly. It is recommended that after the initial boot, if you encounter abnormal noise or stop, you cannot refrigerate, leakage and other faults, should be requested to repair the professionals of regular enterprises, and do not disassemble and repair it by themselves to avoid expanding the scope of failure.     Finally, arrange separate power lines and use special sockets for the cold cabinet. It cannot be used in the same planet with other electrical appliances, otherwise it will cause bad accidents. After installing the grounding device, the above conditions can be powered on the cold cabinet.  

A idle cold cabinet maintenance method In winter, for the cold cabinet, the use demand is reduced compared to summer. Many merchants will stop the cold cabinet. So how should idle cold cabinets be stored correctly in order to ensure the basic functions of the cold cabinet so as to use it normally in the future? 1. Unplug the power plug of the cold cabinet and remove all the items stored in the cold cabinet. Wait for the frost melting. Be careful not to use a weapon when you frost. After the frost, wipe the cold cabinet from the inside to the outside with a clean rag. At the same time, we must pay attention to the condenser and compressor must not be poured with water, so as not to reduce the insulation performance of the electrical appliances.     2. The cold cabinet is not used for a long time. The door seal should be packed with paper or other things to prevent the door seal from sticking to the box. At the same time, apply lime powder on the door seal to prevent adhesion.     3. Adjust the temperature controller at "0" or "stop" or "max" (strong cold point) to make the temperature controller in the natural state and extend its service life. 4. The cold cabinet should be placed in a ventilated and dry place to avoid direct sunlight. Parallel movement should be erected when moving. Do not tilt to prevent the compressor from taking off the cylinder.     5. If possible, it is best to call the idle cold cabinet once a month, so that the compressor will be turned off after half an hour to one hour, so that the compressor will run from time to time to prevent the machine from aging.   Entering winter, the idle cold cabinet can be maintained with the above methods. Do not stop the maintenance of the cold cabinet because you stop using the cold cabinet. Only attention can optimize the performance of the cold cabinet.

CHINA IMPORT AND EXPORT FAIR       Our company take part in the China import And Export FAir The 133rd Canton Fair will be hold at the trade service point of the exhibition hall area A and area D of the China Import and Export Commodity Fair.Our booth is locate in area A The hosting time is from April 15 to April 19th.     Our brochure   Green&health main products include: refrigerated display cabinets for convenience stores, supermarket series of freezers, fruit showcase, meat refrigerated cabinets, bread refrigerated cabinets, cold drinks showcase, ice cream display cabinets, frozen refrigerators and refrigerated trucks, etc. , which are widely used in supermarkets, shopping malls, convenience stores, restaurants chain, hotels, cake shops, dessert shops ...     On April 16th and 17th, customers visited th booth   Communicated with customers, introduced and recommended products according to customers' needs.Solved customers' objections and concerns. The exhibition was organized with a strong, professional and interesting team. Our booth is show you all. Want to know more information and the actual situation of the product, we are willing to answer for you.The exhibition is still in progress.We look forword to your arrival.  

How to distinguish the quality of the freezer？     When we buy a refrigerator, we need to choose the right refrigerator through various conditions. But a lot of people do not know how to distinguish whether the quality of the refrigerator is good or bad, whether it is worth buying. Here are some ways to tell you apart:   The core of the refrigerator is its compressor, a refrigerator needs refrigeration to rely on the compressor operation. So the importance of the compressor can be imagined, so if the compressor quality is good, the quality of the refrigerator is completely different. We can drop a few drops of water on the evaporator to see if it turns to ice in seconds, and if so, then that means the compressor is of good quality. The Green&Health cooling commercial freezers adopts famous brand and high efficiency compressor, with features of fast refrigeration, low noise, safe and stable.     The foaming layer of the freezer. It is the insulation layer of the refrigerator. The foaming layer with good quality can preserve the cold air inside the refrigerator. Otherwise, it is easy to leak the air conditioning, and you can not refrigerate the food well. To distinguish whether the foam layer is good or bad, you need to use the hand to try, a good foam-layer pinch up is very real, the weight is also very heavy, and the preservation effect, energy-saving effect is better. Green&Health refrigerator is the whole polyurethane foaming, not only high density, but also safe, power saving and beautiful.     The evaporator of the refrigerator is a very important part. The evaporator determines the refrigeration speed and preservation quality of the freezer. ① Evaporator design: the design of the evaporator needs to give the evaporation temperature, overheat, and the liquid temperature before the expansion valve. All-copper tube evaporator has fast refrigeration and strong preservation effect.② Refrigeration capacity: the refrigeration capacity directly determines the effective evaporation area of the evaporator, namely, the number of fins, the size and the length of the pipe. The more reasonable the evaporator design, the better the refrigeration performance.     How to judge whether the refrigerator is operating normally？   Carefully observe the working situation of each component of the refrigerator, focus on the refrigeration system, electrical system, fan system these three parts, to judge whether they work normally.   1. Refrigeration system: observe whether there are cracks, damage, frost and dew in the refrigeration system. There is no collision or friction between refrigeration pipelines, pipelines and shell, especially at the welding place of refrigerant pipeline, there is no leakage at the joint connection. Any leakage there will be oil (there is a certain amount of refrigeration oil), can use clean soft cloth or soft paper to wipe the pipe welding and joint connection, observe whether there is oil, to judge whether there is leakage.       2. Electrical system: observe whether the fuse of the electrical system is fused, whether the insulation of the electrical wire is intact and undamaged, whether the circuit board is broken, whether the connection is loose, etc. Especially whether the electrical connection is in good contact, wiring screws, plugs are easy to loose resulting in poor contact.   3. Ventilation system: observe whether the air filter screen, heat exchanger coil and fins accumulate excessive dust. Air inlet and air outlet are unblocked. Whether the fan and fan blades operate normally. etc.      

What factors will affect the refrigeration effect of commercial refrigerators?   Which components of the commercial refrigerators will affect the refrigeration effect:   Door seal: poor sealing performance, resulting in large volume cold air loss of the refrigerator, and then poor refrigeration effect. The sealing ability is mainly affected by the door seal strip, so we must check whether the refrigerator door is uneven when buying commercial refrigerators. If the seal is not tight or frequently open and close the door, will lead to increase the cold air loss of the refrigerator. Therefore, we should try to avoid frequently opening the door, to prevent a large amount of hot air from entering. When opening doors frequently or the goods quantity is too large, the heat load increases sharply, and it generally takes a long time to cool down to the specified temperature.   Thermal insulation layer thickness and material: the thermal insulation layer thickness is not suitable, the refrigerator heat insulation performance is poor. That is, the thickness of insulation layer of refrigerator or the poor quality of insulation material will affect the refrigeration effect. The use environment of the refrigerator may make the insulation layer damp, deformation, and even erosion, its heat insulation ability decreases, the cooling air loss increases, and the temperature drops significantly slows down.   Reasons for improper maintenance of freezers: ①　The frost problem of the refrigerator is not handled in time, resulting in the frost of the evaporator surface is too thick or too much dust, and then resulting in the decline of heat transfer effect. Because the surface temperature of the refrigerator evaporator is mostly lower than 0℃, and the humidity is relatively high, the moisture in the air is easy to frost, or even ice on the surface of the evaporator, affecting the heat transfer effect of the evaporator. In order to prevent the evaporator from being too thick, defrost it regularly.   ②　The compressor and the condenser of the refrigerator are both important refrigeration components. If stained with dust will affect the heat dissipation, resulting in a shortened service life, and directly affect the refrigeration effect. Therefore, it should be cleaned and maintained regularly. The refrigerator condenser fin should be cleaned with a hair brush every other month or so, so as to improve the heat dissipation effect.     Green&Health upright display chiller / freezer’s features and advantages   Green&Health new inverter chiller and freezer, using frequency conversion technology, has the advantages of strong temperature stability, energy saving, low operation noise, long compressor service life and so on.   Green&Health vertical display freezer with 360° movable casters design, easy to move and use. Applying ST design, with a wide range of application;   Green&Health upright display chiller is equipped with high energy efficiency compressor, fast refrigeration speed, low noise, stable, safe and reliable. Electronic microcomputer temperature controller, make the temperature in the cabinet more accurate;   Green&Health vertical freezer is standard equipped with flat anti-rust layer frame, which can adjust the height and tilt Angle according to the need, and the display effect is neat and beautiful. Polyurethane overall foam, unique sealing design, safety, power saving and beautiful;   The foaming layer of the vertical display refrigerator is the overall foam of ultra microporous polyurethane, which has good insulation effect. Side board for injection molding integrated board, both convenient to clean and durable and simple and generous;   The refrigeration system of commercial display cabinet is 100% made of pure copper pipe, and the whole process of inflatable test from pipe sealing to installation. Equipped with a large arc open toughened glass door, not only display effect is good, but also save energy consumption;   Green&health commercial display refrigerator adopts double-layer hollow tempered glass, effectively prevent the loss of cold air, the display goods have good effect. Microporous air outlet, uniform distribution of cold air, the temperature in the cabinet is stable, the food is not easy to dry;   Green&Health commercial open display fridge automatic defrost and with intelligent controller, stable performance, the use of natural air defrost, reduce the power consumption, to prevent internal leakage. Open display: fashion, convenient, simple, preservation, display is not wrong;   Green&Health display cabinet uses white LED energy-saving lamp tube, the inner wall of the hidden cabinet does not occupy the space, 24 hours to show the best display effect. The refrigerator has a compact structure, smooth lines, luxurious appearance, with European style;   The temperature of glass door chiller is a micro-computer temperature display recorder, intelligent control, simple operation, and real-time temperature monitoring is more effective power saving. The cabinet made-of stainless steel, coated board and other materials, corrosion resistant, easy to clean, easy to use, and do not pollute food;      

What is the reason why the cold storage does not refrigerate? What are the solutions?   Cold storage is not refrigeration in addition to poor insulation performance and cold storage evaporator cooling problems, there are two other common problems will also affect the cold storage temperature drops slowly, the following to give you an analysis of all kinds of reasons.     When we find that the temperature of the cold storage is not low enough, no ice, no refrigeration or power consumption increases, the first consideration is whether the cold storage is damaged or the insulation layer damage makes the heat insulation or sealing performance of the cold storage worse, resulting in the increase of cooling loss. Usually poor heat insulation performance is due to the thickness of the insulation layer of pipelines, cold storage insulation wall is not enough, heat insulation and insulation effect is poor. It is mainly caused by the improper selection of insulation layer thickness or the poor quality of insulation material during construction.   In the process of construction and use, the insulation and moisture-proof performance of the insulation material may be damaged, leading to moisture, deformation, and even erosion of the insulation layer, its heat insulation ability decreases, the cooling loss of the cold storage will increase, and the decrease of the storage temperature is significantly slowed down.     Another important reason for the large cooling loss is the poor sealing performance of the cold storage, and more hot air enters the cold storage from the leakage place. Generally, if there is condensation in the sealing strip of the cold storage door or the cold storage heat insulation wall seal, it means that the seal is not tight.     In addition, frequent switch of the cold storage door or more people into the cold storage, will also increase the loss of the cold storage. Avoid opening the cold storage door as far as possible to prevent a large amount of hot air from entering the cold storage. Of course, when the cold storage inventory is frequent or the purchase quantity is too large, the heat load increases sharply, and it generally takes a long time to cool down to the specified temperature.   There can be different solutions to the following different problems:   There is more air or frozen oil in the evaporator, and the heat transfer effect decreases.   Once the inner surface of the evaporator heat transfer pipe is attached with more frozen oil, its heat transfer coefficient will be reduced. Similarly, if there is more air in the heat transfer pipe, the heat transfer area of the evaporator is reduced, the heat transfer efficiency will be significantly reduced, and the temperature decline speed of the cold storage will be slowed down.   Therefore, in the daily operation and maintenance, attention should be paid to timely remove the oil on the inner surface of the evaporator heat transfer pipe and discharge the air in the evaporator, so as to improve the heat transfer efficiency of the evaporator.     The throttle valve is improperly adjusted or blocked, and the refrigerant flow rate is too large or too small   Improper adjustment or blockage of the throttle valve will directly affect the refrigerant flow into the evaporator. When the throttle valve is opened too large, the refrigerant flow is too large, the evaporation pressure and evaporation temperature also increase, and the decline speed of the cold storage temperature will slow down. At the same time, when the throttle valve is opened too small or blocked, the refrigerant flow is also reduced, the cooling capacity of the system is also reduced, and the temperature drop speed of the cold storage will also slow down. Generally, the throttle refrigerant flow is judged by observing the evaporation pressure, evaporation temperature and the frost of the suction tube.   Throttle blockage is an important factor affecting the flow of refrigerant, and the main cause of throttle blockage is ice and dirty plugging. Ice blocking is due to the poor drying effect of the dryer, and the refrigerant contains water. When the refrigerant flows through the throttle valve, the temperature drops below 0℃, and the water in the refrigerant forms ice and blocks the throttle valve hole. Dirty plugging is due to the accumulation of more dust and other dirt on the throttle valve inlet filter screen, refrigerant circulation is not smooth, the formation of blockage.   Stop the unit operation and then frosting: that is, stop the compressor operation, open the cold storage door, let the cold storage temperature rise, until the frost layer automatically melts, and then restart the compressor.   Rinse frost with water: after moving the goods from the cold storage, directly rinse the surface of the evaporator discharge pipe with high temperature tap water to make the frost layer dissolve or fall off. In addition to the poor heat transfer effect of the evaporator, the surface of the evaporator has too thick dust due to not cleaning for a long time, and its heat transfer efficiency will be significantly reduced.   Green&Health cold chain is a famous cold storage construction experts, the main business is cold storage design, cold storage construction, cold storage installation, we undertake large and medium cold storage projects, provide you with detailed and affordable cold storage quotation, tailored for you to your cold storage scheme and cold storage design. Green&Health company provides comprehensive refrigeration solutions, including fresh-keeping cold storage, cooling cold storage, frozen cold storage, low temperature cold storage, pharmaceutical cold storage, flower cold storage, etc.      

How to extend the service life of the supermarket display refrigerator?        Supermarkets use fresh-keeping display cabinets to refrigerate all kinds of goods, which can increase profits to a certain extent. The service life of a supermarket preservation display fridge, like other things, is fixed of years. Generally speaking, the service life of a good quality supermarket preservation display chiller, it is almost in 3-5 years. The length of the service life of the supermarket preservation display fridge is not only related to its own quality, but also related to the maintenance at ordinary times. The more careful maintenance to the display cabinet, the more can extend its use time.     Multideck open chiller information Click here: https://www.commercialdisplayfreezer.com/sale-2160363-right-angle-commercial-open-front-multi-deck-display-chiller-remote-system.html         So, how to extend the service life of the supermarket preservation display cabinet? What should you do? Here are some maintenance methods:   After the arrival of the new supermarket display cabinet, open the box and then check the random accessories in the cabinet. Check the supermarket preservation display chiller according to the factory packing list, whether the accessories except the cabinet are complete, and whether any accessories are omitted in the packing process.   After the arrival of the new supermarket display fridge, do not immediately use electricity. Be sure to keep the supermarket display case for 30 minutes or more than an hour before the power supply.   After using in the supermarket display cabinet for a period of time, to use soft cloth or sponge, dip in water or soap (no corrosive neutral cleaning agent can be) to clean the supermarket chiller, after cleaning, wipe clean with dry cloth. The time interval should be decided according to the frequency of the use of the supermarket glass refrigerator. It is best to wipe and clean the once a month.     Multi glass doors beverage display refrigerator Product information click here:https://www.commercialdisplayfreezer.com/sale-36572217-oem-upright-beverage-chiller-supermarket-display-drink-showcase.html   The electricity line of the supermarket display fridge needs to pay attention to. Use a separate and dedicated socket with a safe and reliable grounding wire.   Before installing the supermarket refrigerator, merchants need to check whether the power supply conforms to 220V / 50 HZ. If the voltage exceeds the corresponding standard, the automatic regulator with more than 1000W must be installed for safe use.     If the external power cord of the commercial display freezer needs to lengthen the power cord, the internal diameter of the power cord of more than 0.75 square millimeters must be used.   When installing the supermarket visible cooler, attention should be paid to reserve enough space for heat dissipation to ensure better cooling effect. Inverter frequency upright display chiller / freezer   Condenser will be attached to a lot of dust and other debris, so the use of the process of dust-proof measures, but also to regularly clean the condenser thoroughly.   The refrigerator should be arranged evenly to avoid deformation caused by uneven force of the deck. At the shop closing time, please pull down the night curtain.   When upright chiller is not in use for a long time, unplug the power plug. Wipe the box clean, and close the door after the box is fully dried.        

What distinction does fixed frequency and inverter refrigerator have? Which one is better?         Refrigerator is one of the most common household appliances in daily life, it is mainly divided into two types: frequency conversion and fixed frequency. In recent years, with the continuous development and improvement of frequency conversion technology, commercial freezers have gradually applied inverter technology, which performs well in both refrigeration and energy saving.       Many consumers do not know how to choose when buying commercial freezers, and often struggle between frequency conversion and fixed frequency. In fact, the inverter refrigerator has its technical superiority, but the traditional fixed frequency refrigerator also has the price advantage, two kinds of refrigerators can meet different preservation needs. So how to choose the refrigerator, quality and price are the key.       The most important is, buy variable frequency refrigerator or fixed frequency refrigerator needs to choose according to oneself actual demand. Let's look at the differences:   Inverter refrigerator:       The speed of the compressor can be adjusted. It uses frequency conversion compressor, and adds frequency conversion controller in the refrigerator control system, by changing the speed of the compressor can change the cooling capacity of the refrigerator. When the refrigerator load is large, the compressor can operate at high speed, and the cooling capacity of the compressor is large to achieve rapid cooling. When the refrigerator load is low, the compressor can operate at a low speed. At this time, the compressor cooling capacity is small, which can reduce the start times of the refrigerator, and greatly extend the service life of the refrigerator.       The inverter refrigerator can make the temperature control in the refrigerator more accurate and stable, making the food temperature impact smaller, and reduce the loss of food water. Because the cooling capacity can be adjusted, the cooling capacity of the refrigerator can be well matched with the load of the refrigerator, to avoid unnecessary energy consumption and reduce power consumption.     Fixed frequency refrigerator:       The speed of the compressor is fixed, generally in 295O-3 OOO turns. When the set temperature is reached, the compressor stops running. When the temperature rises to a certain level, the compressor starts. It is through the compressor stop or start to control the temperature, repeated temperature impact on the food, the temperature control accuracy is worse than the inverter one. Fixed-frequency refrigerator mainly relies on the stop and start of the compressor to realize the temperature control.   Sum up:   Temperature control: ◆ The compressor of the inverter refrigerator can adjust the rotation speed according to the refrigeration needs of the refrigerator. It can achieve accurate control of the temperature, to ensure the stability of the refrigerator internal temperature, so the preservation effect is good.   ◆ Fixed-frequency refrigerator because the power of the compressor is constant, so the output of the cooling capacity is also constant. It has relatively poor temperature control, the temperature inside the refrigerator is not balanced and the preservation effect is poor.     Energy saving: ◆ The frequency conversion technology adopted in the operation process of the inverter refrigerator can accurately control the speed of the refrigerator compressor and save electricity relatively.   ◆ The fixed frequency refrigerator depends on the stop and start of the compressor to control the internal temperature, so the power consumption is large when the compressor is started.   Operation Noise: ◆ The compressor of inverter refrigerator does not need to start frequently, so the noise generated is lower.   ◆ Fixed frequency refrigerator in the process of operation of its compressor frequently start, producing more noise.     Price     Frequency frequency refrigerator because the technology is more advanced, more intelligent, so the price is higher. But the work efficiency is high, so it can also save more electricity and energy saving.   Service life aspect:     The compressor of the fixed-frequency refrigerator needs to start and stop frequently and run constantly. But the compressor of inverter refrigerator does not need to start and stop frequently, so the wear is smaller, relatively speaking, the service life of frequency conversion refrigerator is longer.       Above is the difference between the frequency conversion refrigerator and the fixed frequency refrigerator, did you understand? Must combine yours actual needs, distinguish clearly to buy.         Our company produces all kinds of refrigeration equipment, display refrigerator and cold storage can be used inverter technology. Welcome everyone to consult and order !    

How to maintain the cold storage correctly?     After the cold storage is newly installed or reused after a long-term use, comprehensive testing and debugging should be carried out. Under the condition that all indicators are normal, it can be started under the guidance of professional refrigeration technicians.   Pay attention to the collision and scraping of the cold storage board and appearance. Because it may cause depression and rust, serious will cause a small range of insulation performance reduced.     Because the prefabricated cold storage is made of many pieces of thermal insulation panels, so there is a certain gap between the panels. These gaps will be sealed with sealant to prevent air and water from entering. So in the use of some sealing failure parts should be repaired in time, and resolutely eliminate the leakage and cooling phenomenon.   Prevent large amounts of ice and water on the ground. If there is ice, do not use hard objects to clean up to prevent damage to the ground.   Initial operation unit: the oil surface and the oil return condition of the compressor and the cleanliness of the oil should be observed. Found that the oil is dirty or the oil surface drop should be solved in time, so as not to cause poor lubrication.     Clean the condenser frequently to keep it in a good heat transfer state. To often check the condenser, scaling problems, to remove the dust in time. Check whether the motor and fan rotate flexibly. If there is abnormal friction sound, the same model bearing should be replaced. The dirt on the fan blade, coil, water plate should be removed frequently.   For the evaporator: to often check the defrosting situation, whether the defrosting is timely and effective, will affect the refrigeration effect, resulting in the refrigeration system back liquid.     Observe the operating status of the compressor frequently and check its exhaust temperature. During the season change, special attention should be paid to the operating state of the system, and adjust the liquid supply and condensation temperature of the system in time.   Listen carefully to the compressor, condenser fan running sound, found abnormal should be handled in time. Check the vibration of the compressor and exhaust pipe.     Refrigeration technicians shall inspect and maintain the compressor once a year. Check the oil level and oil color of the compressor. If the oil level is lower than 1 / 2 of the observation mirror, the cause of the oil leakage should be identified and the lubricating oil should be filled after troubleshooting. If the oil has changed color, the lubricating oil should be completely replaced completely.   Regularly check whether the connection pipe on the connecting pipes and valve parts of the refrigeration unit is firm, and whether there is refrigerant leakage (the oil trace will appear in the general leakage place).    

How much does it cost to build a cold storage facility?        Many customers will directly ask, how much does it cost to build a cold storage ? In fact, the cost of building a cold room is affected by a variety of factors.   Product:https://www.commercialdisplayfreezer.com/sale-27170615-customized-size-cold-room-warehouse-cold-storage-fruit-vegetable-icecream.html            First of all, we need to consider the following factors: the size, use, temperature, configuration of the cold storage.        Usually according to the temperature classification, cold storage is divided into fresh cold storage (2~8℃), frozen cold storage (-10℃ / -18℃), low temperature cold storage (-20℃ / -23℃), quick-frozen cold storage (-23℃ below).            Fresh cold storage is suitable for fruits and vegetables, frozen cold storage is suitable for frozen food, low temperature cold storage is suitable for freezing aquatic products and poultry meat, quick-frozen cold storage is suitable for rapid freezing treatment before fresh food refrigeration. These elements depend on the requests of the customer, only on the basis of fully understanding the customer needs, we can design according to the actual situation.            When other conditions are the same, the lower the cold storage temperature, the higher the cost. In the selection of compressor equipment, refrigeration equipment is divided into famous imported compressor and domestic compressor, imported equipment with good quality and high price.        In addition, it is also necessary to consider the cold storage insulation materials, refrigeration equipment, refrigeration pipes, valves, control box, wire and other factors. A good cold storage design scheme should take into account the reasonable practicability of cold storage, and the later use cost. And in the case of the lowest price, to design the most suitable for customer needs of the cold storage.            The cold storage design scheme not only affects the current cost of cold storage, but also affects the cost of later use, such as electricity consumption. It will also involve the layout design of the cold storage, component equipment selection, refrigerant, sandwich panel selection and many other details.        The above is the reason for cold storage construction to choose a professional company, especially for large cold storage, but also to choose a strong company. Green&Health commercial cold storage, by professional salesman communication, provide free design and more details grasp. Green&Health is strength manufacturers with more than ten years of experience in cold storage design, installation, sales, we specially supply all kinds of professional refrigeration equipment for enterprises.        

Precautions for using the blast freezer     It should be placed away from the heat source and free from direct sunlight. Because the blast freezer needs to exchange heat with the outside world, that is, dissipate the heat to the outside world through the condenser, the higher the external environment temperature, the slower the heat dissipation, the longer the working time of the freezer, increase the power consumption, and the refrigeration effect is poor.   It should be placed in places with low humidity. The quick-frozen cabinet shell, condenser and compressor are all metal materials. If the air humidity is too high, it will make these parts rust and shorten the service life of the quick-frozen cabinet. At the same time, the humid and overheated environment will cause the surface condensation of the blast freezer box and affect the electrical performance.   It should be placed in a well-ventilated place. If the blast freezer is full of debris, or too close to the wall, it is not conducive to heat dissipation will affect the cooling effect. The top surface of the blast freezer should have at least 30CM height space, and at least 20CM space should be left on the back and both sides for heat dissipation.   It should be placed on flat and solid ground and keep the compressor level. This is not only necessary for safety, but also allows the compressor to work smoothly, reducing vibration and noise.     Maintenance of blast freezer     The appearance and inside of the cabinet should be washed with clean water regularly, and disinfected well, so as to ensure the high quality of the food and meet the hygiene standards. Fat in food is a breeding ground for fungi and bacteria. Stainless steel, plastic, rubber components, these components are designed to clean cleaning but not absolutely prevent bacterial formation. So in order to avoid contamination, all parts in contact with the food must be thoroughly cleaned and disinfected.   Notes for handling the blast freezer   The maximum inclination Angle of the box should not exceed 45 degrees, and should not be inverted or placed horizontally, otherwise it will damage the compressor or make the frozen oil in the compressor flow into the refrigeration pipeline, which will affect the refrigeration effect.   In the process of transportation, to prevent knock and violent vibration, to prevent rain and water.     Features of blast freezer:   1. The door is self-closing, and the door gasket can easily replace.   2. There is 4 sizes of blast freezer: 5 pans, 8 pans, 11 pans,15 pans for your option.   3. The blast freezer holds the versatile GN1/1 pans and 400x600 mm bakery trays.   4. Equipped with height adjustable stainless steel feet, and the universal casters are also for an option.   5. It takes 240 minutes for the center temperature of frozen food to cool from +70°C to -18°C.   It takes 90 minutes for the center temperature of frozen food to cool from +70°C to +3°C.   The whole process of phased refrigeration, to ensure that the nutrition of food does not lose, keep fresh taste.   6. Voltage range: 220~230V50HZ, 110~120V60HZ, 220V60HZ   7. The blast freezer is equipped with a door sensor, the fan will stop when the door is open, save the energy.   8. Equipped with one precise food grade temperature probe. And more temperature probes are for option.   9. The blast freezer is equipped with the Intelligent thermostat.   10. Produced base on the level 6 energy efficiency and food safety "HACCP" standard in Europe.   11. The internal and external are all used food grade "AISI201" stainless steel for this blast freezer chiller.    

Choose a high-quality commercial freezer, these four major factors are the key       Commercial display freezers have been widely used in various commercial places, such as shopping malls, supermarkets, convenience stores, vegetable markets, hotels, restaurants and so on. Choosing a suitable freezer can bring more profits to businesses. However, now there are many brands in the refrigerator market, let us very tangled how to choose the right refrigerator? Then this article will tell you to consider the following factors when choosing the right freezer:     Click here:   https://www.commercialdisplayfreezer.com/sale-26663275-cutomized-hypermarket-combination-cooler-island-display-freezer-530l.html The appearance of the freezer       Now people's living standard is constantly improving, and the consumption concept is also constantly changing. Now, customers first look at the appearance when choosing goods. Fashion and high-end products can attract the attention of consumers, thus increasing the income of the store. So a high-end, stylish freezer can help increase the store's takings.   Refrigeration mode of the freezer          The supermarket horizontal island freezer of our Green&Health company adopts direct cooling refrigeration, with automatic defrosting function, the price is low, the power consumption is small, the effective space in the cabinet is large, the refrigeration effect is stable, and the operation noise is low.       Another vertical air-cooled freezer is also a good choice.       It is energy-efficient, and uses high-brightness LED lights. The self-rebound door and the glass door with heaters allow them to close in time to maintain the low temperature. Fan cooling with automatic defrosting ensures that your food stays fresh. We can provide customized services to meet your specific needs.   Click here:   https://www.commercialdisplayfreezer.com/sale-26945066-double-glass-door-upright-commercial-display-freezer-automatic-defrost.html          Energy consumption of freezer      Now is advocating low carbon environmental protection, all high energy consumption industries are constantly changing to low energy consumption. Commercial freezers have relatively high energy consumption, but products like freezers do not have lower energy consumption as better. The refrigerator should choose the appropriate energy consumption standard, but also can not blindly pursue the lowest energy consumption, otherwise the refrigeration effect can not meet the requirements, in the use process of the refrigerator will also become a problem.     After-sales service of the freezer      There may be problems in the use of the refrigerator, so we must choose to provide good after-sales service suppliers. The Green&Health company's refrigerator products provide a one-year warranty service. You can consult us for any problems when using our freezer, and we are happy to solve the problem for you.        Green&Health Intelligent Cold Chain Technology Co., Ltd. is a professional refrigerator manufacturer. We are good at starting from the needs of buyers, for the majority of enterprises and shopkeepers to provide appropriate commercial refrigerator solutions. Our products cover a wide range of products, including supermarket refrigerated display cabinet, multi deck open chiller, combination island freezer, fresh meat display refrigerator, deli display chiller, ice cream display freezer, cake display fridge, cold storage and so on. We are able to meet your full refrigeration equipment requirements.  

How should we deal with the refrigerator that is disused for a long time?   If the refrigerator is not used for a long time, the following situations may occur:   1. If the refrigerator is not used for a long time, the frozen oil and refrigerant in the refrigerator will be deposited to the bottom of the compressor and pipeline. The refrigerant is corrosive, and the refrigerator will accelerate the corrosion of the pipeline because of the lack of frozen oil protection, which will damage the internal function of the refrigerator.   2. The lubricating oil in the compressor sticks to the bottom, and all the working parts in the machine are in a dry state. At this time, if the machine is used, the cylinder and piston of the compressor will work without lubrication, which will affect the service life of the compressor.                                                                  Green&Health main products   So how should we deal with refrigerators that are not used for a long time?     Regular start-up It is recommended that you need to start up once a month to recycle the refrigerant and frozen oil in the pipeline. The power supply time should not be too long, with 5-8 minutes is appropriate. Too long, it may cause the temperature in the refrigerator to decrease, produce new frost and condensate water, and increase the humidity of the environment in the refrigerator.     Clean up in time Before disusing the freezer, be sure you clean the freezer thoroughly. In addition to defrosting and simply wiping the inner wall, the refrigerator should also be cleaned and disinfected to ensure that there is no food residue inside the freezer.     Place in dry and ventilated places After cleaning, the refrigerator must be placed in a ventilated environment, open the refrigerator door for drying treatment. After that, do not put any food in the freezer to prevent the freezer from being contaminated again. The refrigerator door can not be closed until the temperature inside the freezer is the same as the room temperature and there is not any humidity.     Clean the seal strip After a period of use, the sealing strip is usually not very clean. Even if invisible to the naked eye, it will be infected by the food in the freezer many times. So, don't forget to clean the seal strip.   Green&Health glass door drinks display fridge for bar         This high-looking, large-capacity commercial display chiller is designed for bars to store and display drinks and liquors. The fan cooling method makes the temperature in the cabinet more uniform. Its double hollow glass door is made of high-end defogging glass material to make the goods clearly displayed. Automatic defrosting function saves time and energy and keeps the chiller clean. This double-layer hollow structure has better heat insulation effect and can avoid cold air leakage. Adjustable layer rack makes all kinds of beverages can be placed at will.This beverage display refrigerator uses three-color lighting, which can adjust the appropriate light color according to different environments.           Guangdong Green&Health Intelligent Cold Chain Technology Co., Ltd. is a professional commercial refrigeration equipment manufacturer with more than 10 years of production experience. The factory of The company covers an area of more than 50,000 square meters, with more than 200 employees, with a number of advanced production equipment.         The main products of the Green&Health company include the following: upright display chiller, glass door display freezer, fruit preservation multi deck open chiller, supermarket combination island freezer, horizontal meat refrigerated fridge, cake display refrigerator, ice cream display showcase, refrigerated cold storage, freezer cold room and other commercial refrigeration equipment. Green&Health refrigeration products are widely used in supermarkets, shopping malls, convenience stores, restaurants, hotels, cake shops, meat shops and other commercial places.    

Air cooling? Direct cooling? How to choose the refrigerator?         Commercial refrigerators are generally divided into air - cooled and straight - cooled. As consumers are often very confused about two terms, do not know how to choose the right refrigerator. Today's content will tell you the difference between direct cooling and air cooling.         Straight-cooled chiller has an evaporator, the size of the evaporator is reasonable matching according to the size of the chiller and the temperature requirements. The cooling method cools the food by natural convection of cool air.         Air - cooled refrigerator is equipped with finned evaporator and duct circulation assembly. The fan motor circulates up and down through the air in the chiller cooled by the evaporator to achieve the purpose of refrigeration. It blows in cold air, so it does not absorb moisture from the stored food and cause frost. So air - cooled chiller is also called frost - free chiller. Frost-free means that there is no frost on the inner surface of the refrigerator, and the surface of the evaporator is still frosted, but there is no need to defrost by hand.   Which kind of refrigerator should I choose?         Because of the different refrigeration methods, the main performance of direct cooling refrigerator and air cooling refrigerator is different.         Direct cooling refrigerator consumes little power, low noise, low price, but the refrigeration speed is slow, the temperature uniformity is poor. The refrigerator need for manual defrosting. The fan cooling refrigerator has fast freezing speed, even refrigeration temperature and automatic defrosting function. However, the power consumption, noise and price are slightly higher than that of direct cooling refrigerators.   https://www.commercialdisplayfreezer.com/sale-26810055-four-glass-door-combination-freezer-cooler-for-beverage-display.html   Upright drinks display chiller from Green&Health           This commercial display fridge is perfect for storing and displaying drinks. It features fan cooling, auto defrost, and a glass door for easy viewing. The brand compressor ensures reliable cooling, while the self-closing door keeps your products fresh. The adjustable shelves and LED lighting make it easy to organize and find your products, while the microcomputer controller ensures precise temperature control. The aluminum alloy frame is durable and easy to clean, and the automatic evaporation of water prevents ice and water buildup. We also offers OEM service for customized brand.      

How to choose a satisfactory fruit open chiller ?         Nowadays, more and more large supermarkets and small fruit stores tend to use multi deck open chiller to display and preserve fruit. So, what are the benefits of using a open chiller to display fruit? And how do we choose a high-quality open chiller ?     Benefit 1: Extend the fruit freshness period, reduce the loss         The higher the ambient temperature, the stronger the fruit respiration, the faster the fruit ripen, so the shorter the fruit storage time. Therefore, the right temperature is important for fruit storage:   1) The use of air chiller for refrigeration can greatly inhibit the respiration of fruits, delay the metabolic rate of fruits, and extend the storage and freshness period of fruits.   2) It can retain the original color of the fruit, maintain the delicious taste and preserve fruit quality.   Benefit 2: Sell high-grade fruit, increase fruit profit         General seasonal fruit, is used to attract popularity, to win the quantity with low price, the profit space is limited. If we want to increase our profit margin further, we must improve our products and services. Then, imported fruits, fruits with gift box, are suitable for display on the open air chiller. Through the irradiation and rendering of lights and reverse mirror, the level of the store can be improved and customers' purchase desire can be greatly increased.     Green&Health fruit multi deck open chiller, with excellent quality to win the trust of many customers.   With temperatures ranging from 2 to 8 degrees Celsius, the open chiller can be used to refrigerate fruits, vegetables and drinks. It adopts air cooling refrigeration, can quickly cool down, to ensure that the cabinet and food do not frost. Automatic evaporation and drainage features avoid the problem of standing water in the cabinet. The open fridge adopts famous brand commercial compressor, which has the advantages of energy saving, high efficiency and long service life. The internal evaporation pipe adopts high quality copper pipe, which has good corrosion resistance performance and can prevent leakage and blockage in the refrigeration system. We master the mature foaming process, using the high quality raw materials, so can produce the chiller with good insulation effect. Furthermore, its advantages also include large storage space, adjustable shelf, energy-saving LED lamps, intelligent temperature controller and so on.         Our company provides professional customized services, diversified to meet your needs!      

The new freezer smells, we can do this!         The inner tank of the freezer is generally made of non-toxic and environmentally friendly materials, but because of the good sealing of the door seal, the refrigerator will have odor when it is used for the first time. The smell is not harmful to humans and will wear off after two or three days of normal freezer use. But if you're in desperate need of an odor-free freezer, there are a few simple odor-free tips that can help.   1 Lemon and orange zest         Cutting a lemon in half and placing it directly in the freezer will speed up the process. Or wash the orange peel with clean water and dry it, and then scatter the peel into the freezer.   2 Tea Leaves         Tea leaves are wrapped in paper towels and then put in the freezer. The aroma released by tea leaves can effectively absorb the odor molecules in the refrigerator and purify the odor.   3 Vinegar         Pour vinegar into a bowl and put it in the freezer to break down the smell as well. The principle is that acetic acid can very well dissolve odor, achieve decomposition effect, bring fresh air to the new freezer.   4 Pineapple         Peel the pineapple and cut it in half. Eat one half. Put the other half in a bowl and put it in the freezer. Because pineapple is a crude fiber type of fruit, both absorption of odor and can send out fragrance.         Using the above methods, you can speed up to achieve the effect of odor removal so that you can use your new refrigerator faster and better.   https://www.commercialdisplayfreezer.com/sale-26945066-double-glass-door-upright-commercial-display-freezer-automatic-defrost.html          This commercial freezer has a fashionable and modern design that will complement any store's decoration. The bright LED lighting makes it easy to see what's inside, while the self-rebounding door and glass door with heater help keep the cold air in. The fan cooling and self-defrosting system help keep the freezer running smoothly, while the intelligence controller makes it easy to adjust the temperature. This freezer also comes with 5 adjustable shelves, so you can adjust the height to your needs. And it uses a DANFOSS compressor with R290/R404a refrigerant for efficient operation.    

What are the advantages of supermarket combination island freezer?         Combined island freezer is a common commercial refrigeration equipment in supermarkets. Horizontal combined island cabinet can be divided into two kinds according to different needs: freezer and chiller. The popular island freezer is mainly used for freezing meat, ice cream, fish balls and lamb rolls. This kind of island freezer is favored by the market because of its good appearance and efficient freezing effect. So, let's see what are the advantages of the combined island freezer?   Direct cooling and auto defrost         The island freezer from Green&Health adopts direct cooling and the temperature is controlled at -18~-22 degrees, which is very suitable for storing frozen food.Automatic frost function, can avoid food frosting, and easy to clean and maintain, keeping the cabinet clean and sanitary.   Low temperature extends food storage time         Our island freezer can greatly prolong the preservation time of food, effectively ensure the freshness of food materials, and avoid the phenomenon of food deterioration.   Large glass window to enhance the display effect         The horizontal island freezer adopts HD thickened glass, which can not only effectively isolate the hot air, but also enable customers to see the goods inside clearly and improve their purchase desire.     Optimize layout and save space          Several island freezer can be combined together to optimize the layout of the supermarket and save space. This combined design and other supermarket equipment complement each other, constitute a spacious and comfortable shopping environment. The island freezer can make full use of the limited space to better display the goods and facilitate the purchase of customers.   Energy saving and environmental protection         The island freezer is energy saving and environmental protection, with small power consumption, about 8~10 KWH of electricity per day.Customers determine their own needs to open the refrigerator to take things, to a certain extent also save electricity.   Cheap price, cost-effective preferred         Compared to other commercial refrigeration equipment, such as multi deck open chiller. Island freezer price is low, cost-effective. And our company as the source manufacturer, can also give you a lower price.         Green&Health, can provide you with a full set of refrigeration equipment services! As a professional refrigerator manufacturer, our company can provide you with satisfactory commercial refrigerator solutions according to the actual needs of buyers.   https://www.commercialdisplayfreezer.com/sale-26663275-cutomized-hypermarket-combination-cooler-island-display-freezer-530l.html    

New arrival: monoblock system + inverter type cold room !           Our cold storage adopts monoblock refrigeration unit and inverter type compressor, which has been upgraded and optimized compared with the previous cold storage. Let's take a look at the advantages of this cold storage!           First of all, the first highlight of this cold storage is the use of integrated refrigeration unit, that is, a compact machine containing all components (compressor, condenser, evaporator, control panel, etc.). It comes in two types: wall type and roof type. The advantages of this refrigeration unit are easy to transport and move, can be installed quickly, greatly save the construction time and labour. Because of its convenience, it is increasingly popular among users.       Secondly, its inverter type compressor has the advantages of high efficiency, low power consumption, wide cold force coverage, low noise, small temperature fluctuation, high reliability and high stability.cold storage can be freely used in food refrigeration, aquatic freezing, medicine, flower preservation, scientific research experiments and other fields.   https://www.commercialdisplayfreezer.com/sale-12955571-customized-size-solar-power-chiller-freezer-cold-storage-room-energy-saving.html         Finally, our cold storage uses high performance thermal insulation fireproof panel, with good thermal insulation performance, no pollution, corrosion resistance and other advantages. This cold storage can detect the frosting situation according to the temperature of the storage or evaporation temperature, and enter the defrosting procedure automatically, so as to truly achieve high efficient and fast operation.      

Inverter type -- Commercial display refrigerator        Nowadays, the single function of refrigeration and preservation of food can no longer meet the needs of customers for refrigerators. Therefore, refrigerators with energy saving, precise temperature control, low noise, long service life, air-cooled frost-free and other diversified functions have gained more and more people's favor. So this content will introduce two types of "Commercial display refrigerator -- Inverter type" that can meet the above functions.     What is a “ inverter type refrigerator ”?        "Inverter type refrigerator" refers to the refrigerator with variable frequency compressor with variable speed. This compressor can automatically adjust the speed according to the requirements of the refrigerator. The speed of the "fixed frequency refrigerator" is fixed and cannot be adjusted, so it can only rely on frequent starting and stopping of the compressor to provide cooling capacity. Therefore, " inverter type refrigerator " is more intelligent!   Why buy a “ inverter type refrigerator ”?   Advantage 1: Energy saving and environmental protection      "Inverter type refrigerator" adopts frequency conversion technology to accurately control the compressor in the work, so that it can change the speed according to the needs of the chiller or freezer, so that the refrigerator can keep low power operation. Because there is no need to frequently start and stop the compressor, so it can effectively reduce energy consumption, save electricity and protect environment.   Advantage 2: Precise temperature control      Small temperature fluctuations can maintain the freshness of the ingredients in the refrigerator. "Inverter type refrigerator" based on this goal, by small amplitude constantly adjust the compressor speed, to achieve a constant temperature state. Therefore, it effectively prolongs the freshness time of the ingredients.   Advantage 3: Low noise and long service life      Refrigerator noise mainly comes from compressor operation, start and stop. Because the "inverter type refrigerator" does not need frequent startup and shutdown, the refrigerator produces less noise in use and can operate relatively quietly. "Inverter type refrigerator" avoids constant operation, so it does less damage to the compressor and prolongs the service life.   https://www.commercialdisplayfreezer.com/sale-36220127-2520l-commercial-beverage-cooler-cold-drinks-refrigerator-with-compressor-r404a.html Conclusion: Should we buy "Inverter type refrigerator"?       The diversified functions of "inverter type refrigerator" are incomparable to those of "fixed frequency refrigerator". In order to pursue quieter use experience and better preservation effect of food ingredients, then "inverter type refrigerator" is your best choice.         Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products.