How to deal with the freezer ice blocking phenomenon?

How to deal with the freezer ice blocking phenomenon?

There are a lot of freezers in the use of the process of frost and frost, this situation is due to the freezer ice blocking is now caused.

Usually ice blocking failure is mainly due to the time we charge the refrigerant, the refrigeration system for vacuum drying treatment is not thorough enough, or the refrigerant itself contains too much water. When the freezer is in working condition, the freezer will start to freeze because of the residual moisture, you can hear the sound of refrigerant circulating water in the pipe.

Green&Health Back Load Display Fridge / Freezer

https://www.maoyt.com/test/commercialdisplayfreezer.com/sale-11647436-refrigerated-glass-door-display-chiller-walk-in-refrigerator-cold-room.html

After a period of time, the water will slowly stay out of the refrigerant, thus causing the blockage of the capillary tube, so that the refrigerant is not able to circulate the flow, the loss of cooling capacity, when the flow of water stops, the temperature rises, the frost in the freezer room began to melt, which is known as frost, and then the cycle to repeat the above process.

For this failure, we do not have to consciously seek master to repair, do-it-yourself solution. First of all, we must use a hot towel wrapped capillary tube outlet, so that the ice blockage quickly melted, and then the melted water pumped back to the compressor. After such treatment, the machine can temporarily resume work. If it still cannot work normally, the vacuum treatment method is used to dry it.

The quality of the freezer itself is the key, but with the use of a long time, there will always be some small problems, in our daily life, we must pay attention to the use of the freezer when there are many places, usually do some maintenance work, can effectively extend the life of the freezer.

https://www.maoyt.com/test/commercialdisplayfreezer.com/sale-12149663-glass-display-walk-in-chiller-with-ce-certification-for-hypermarket.html

Back Load Display Fridge / Freezer from Green&Health

* Core Material: Polyurethane(PU) density 43kg/m3 or above

* Surface Material: Color steel,galvanized steel,embossed aluminum,stainless steel

* Door type: Swing(half-buried,all-buried door),manual sliding door,automatic sliding door,impact door,rolling up door,etc

* Panel thickness: Thickness can be 50mm,75mm,100mm,120mm,150mm,200mm,according to different working temperature and outside condition of ambient temperature.

* Environment friendly R404a refrigerant. Capacity can be small to 10cubic meter, big to 20cubic meter.

* The temperature can be 0 to 10 °C for chilling storage, or -20°C to frozen storage.

* Display and Storage can also meet your need

Green&Health company has been engaged in commercial refrigeration equipment for more than ten years. We are a professional manufacturer that can provide customized service, so that you can use the most affordable price to buy the most satisfactory products.https://www.commercialdisplayfreezer.com/